3M 926141-01-13-EU Equivalent & Substitute Parts

Part Overview

The 3M 926141-01-13-EU is a rectangular connector header designed for through-hole mounting applications. This 13-position, single-row connector operates at 0.100" (2.54mm) pitch and is rated for 2.5A current with an operating temperature range of -40°C to 105°C. The part carries an obsolete product status, making identification of functionally equivalent alternatives essential for ongoing design support and component procurement.

Substiute Parts

926141-01-13-EU

3MIn Stock: 1090926141-01-13-EU Datasheet

Current PartRFQ

0022102132

MolexIn Stock: 7470022102132 Datasheet

MFR RecommendedRFQ

0423751866

MolexIn Stock: 8200423751866 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 3M 926141-01-13-EU is determined by the following critical parameters:

• Pitch - Mating: 0.100" (2.54mm)
• Number of Positions: 13
• Number of Rows: 1
• Connector Type: Header with breakaway capability
• Contact Type: Male Pin
• Mounting Type: Through Hole
• Termination: Solder
• Fastening Type: Push-Pull
• Material Flammability Rating: UL94 V-0

The two substitute parts listed below satisfy these core electrical and mechanical requirements and maintain compatibility with the original design specifications.

Parameter Comparison

Engineering Selection Recommendations

Both Molex substitute parts maintain active product status and satisfy the core electrical and mechanical compatibility requirements of the 3M 926141-01-13-EU.

Molex 0022102132 (KK254, 4030 series) provides the closest dimensional alignment to the original part, with contact lengths and insulation height values nearest to the 3M specification. This part carries ROHS3 compliance and REACH unaffected status, supporting modern regulatory requirements.

Molex 0423751866 (KK254, 42375 series) offers breakaway connector functionality matching the original design and includes glass-filled nylon insulation material for enhanced mechanical durability. This part also maintains ROHS3 compliance and REACH unaffected status.

Both substitutes are rated for UL94 V-0 flammability and carry unlimited moisture sensitivity level (MSL 1), consistent with the original part. Selection between these two options depends on specific dimensional constraints within the target application, particularly regarding contact post length and overall connector height.

Frequently Asked Questions (FAQ)

Q: Can Molex 0022102132 and Molex 0423751866 be used interchangeably with the 3M 926141-01-13-EU?

A: Both Molex parts satisfy the core substitution criteria: 13-position, 0.100" (2.54mm) pitch, single-row, through-hole solder-terminated headers with push-pull fastening and UL94 V-0 flammability rating. However, dimensional differences exist in contact length and insulation height. Verify that these variations do not conflict with mating connector specifications or PCB layout constraints in your application.

Q: What are the key dimensional differences between the substitute parts?

A: The Molex 0022102132 has an overall contact length of 0.690" (17.53mm) with 0.130" (3.30mm) insulation height. The Molex 0423751866 has an overall contact length of 0.700" (17.78mm) with 0.090" (2.29mm) insulation height. The original 3M part measures 0.628" (15.95mm) overall with 0.100" (2.54mm) insulation height. These differences may affect mating depth and board-to-board spacing.

Q: Do the substitute parts have different contact finish specifications?

A: Yes. The 3M original uses gold plating on both mating and post contacts. Molex 0022102132 uses gold on mating contacts and tin on post contacts. Molex 0423751866 uses tin on both mating and post contacts. Contact finish selection depends on application requirements for corrosion resistance and solderability.

Q: Are both Molex substitutes compliant with current regulatory standards?

A: Both Molex parts carry ROHS3 compliance and REACH unaffected status. The original 3M part does not specify these certifications. If your application requires ROHS3 or REACH compliance, either Molex substitute is suitable.

Q: What is the difference in insulation material between the parts?

A: The 3M original uses polycyclohexylenedimethylene terephthalate (PCT). Molex 0022102132 uses polyamide (PA) nylon. Molex 0423751866 uses glass-filled polyamide (PA) nylon. Glass-filled nylon provides enhanced mechanical strength and thermal stability compared to standard nylon.