Equivalent & Substitute Parts for Honeywell 924CE2-S3

Part Overview

The Honeywell 924CE2-S3 is an SPDT snap action switch with a 10A AC rating at 250V, featuring a roller plunger actuator and chassis mount configuration. This switch is designed for applications requiring reliable on-momentary switching with IP66 ingress protection and cable lead termination. The product maintains Active status with full RoHS compliance and unlimited moisture sensitivity rating.

Substitute parts are identified when equivalent functional performance can be achieved within the allowed electrical and mechanical parameter ranges for snap action switch applications, accounting for differences in current ratings, voltage specifications, and mechanical characteristics.

Substiute Parts

924CE2-S3

Honeywell Sensing and Productivity SolutionsIn Stock: 927924CE2-S3 Datasheet

Current PartRFQ

D4C-1602

Omron Automation and SafetyIn Stock: 954D4C-1602 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

The Omron D4C-1602 is identified as a substitute based on the following allowed parameter alignment:

Common Functional Parameters:

• SPDT circuit configuration with on-momentary switch function
• Roller plunger actuator type
• Chassis mount configuration with cable lead termination
• 250V AC voltage rating compatibility
• Active product status with full compliance certifications

Parameter Differences Requiring Evaluation:

• Current rating: 924CE2-S3 rated at 10A AC versus D4C-1602 rated at 5A AC
• Ingress protection: 924CE2-S3 provides IP66 versus D4C-1602 provides IP67
• Operating force: 924CE2-S3 requires 2300gf versus D4C-1602 requires 1200gf
• Operating temperature: 924CE2-S3 operates 0°C to 70°C versus D4C-1602 operates -10°C to 70°C
• Mechanical life: Both rated at 10,000,000 cycles

The D4C-1602 substitution is valid for applications where the 5A AC current requirement is sufficient and the enhanced IP67 waterproof rating is acceptable or beneficial.

Parameter Comparison

Engineering Selection Recommendations

Primary Part Selection (924CE2-S3): Select the Honeywell 924CE2-S3 for applications requiring 10A AC switching capacity at 250V. This part maintains Active product status with full RoHS compliance and unlimited moisture sensitivity rating. The IP66 ingress protection rating provides dust-tight and water-resistant performance suitable for industrial environments.

Substitute Part Selection (D4C-1602): The Omron D4C-1602 serves as a substitute where the application current requirement does not exceed 5A AC at 250V. This part offers enhanced IP67 waterproof ingress protection compared to the primary part's IP66 rating. Both parts maintain Active product status and full compliance certifications. The D4C-1602 extends the operating temperature range to -10°C, providing broader environmental compatibility.

Compliance Basis: Both parts are RoHS compliant and carry unlimited moisture sensitivity ratings, ensuring regulatory compliance across standard industrial applications. The D4C-1602 carries ROHS3 compliance with REACH Unaffected status, providing additional regulatory assurance for European markets.

Frequently Asked Questions (FAQ)

Q: Can the D4C-1602 replace the 924CE2-S3 in all applications?

A: The D4C-1602 substitution is valid only when the application current requirement does not exceed 5A AC. The 924CE2-S3 is rated for 10A AC, while the D4C-1602 is rated for 5A AC. If your application requires the full 10A capacity, the 924CE2-S3 must be used.

Q: What is the difference in ingress protection between these parts?

A: The 924CE2-S3 provides IP66 protection (dust tight, water resistant), while the D4C-1602 provides IP67 protection (dust tight, waterproof). IP67 offers enhanced waterproof capability suitable for submersion scenarios, whereas IP66 is suitable for high-pressure water jets.

Q: Are there differences in mechanical actuation between these switches?

A: Yes. The 924CE2-S3 requires 2300gf operating force, while the D4C-1602 requires 1200gf. The D4C-1602 has lower actuation force, which may affect application suitability depending on actuator design and mechanical linkage requirements.

Q: Do both parts support the same operating temperature range?

A: No. The 924CE2-S3 operates from 0°C to 70°C, while the D4C-1602 operates from -10°C to 70°C. The D4C-1602 provides extended low-temperature capability for cold environment applications.

Q: What are the cable length specifications?

A: The 924CE2-S3 includes 3 feet of cable, while the D4C-1602 includes 3 meters of cable. This represents a significant difference in lead length that may affect installation and routing requirements.

Q: Are both parts currently available?

A: Yes. Both the 924CE2-S3 and D4C-1602 maintain Active product status. The 924CE2-S3 has 871 pieces in stock, and the D4C-1602 has 851 pieces in stock.

Q: What compliance certifications apply to both parts?

A: Both parts are RoHS compliant with unlimited moisture sensitivity rating (MSL 1). The D4C-1602 carries additional ROHS3 compliance and REACH Unaffected status, providing enhanced regulatory coverage for European applications.