TE Connectivity Erni 923828 Equivalent & Substitute Parts

Part Overview

The TE Connectivity Erni 923828 is a 55-position header connector with male pins, featuring 0.079" (2.00mm) pitch and right-angle through-hole mounting. This connector is classified as obsolete, necessitating identification of active equivalent parts for ongoing procurement and design applications. The connector utilizes press-fit termination and gold-plated contacts suitable for backplane applications.

Substiute Parts

923828

TE Connectivity ErniIn Stock: 1113923828 Datasheet

Current PartRFQ

5106012-1

TE Connectivity AMP ConnectorsIn Stock: 17005106012-1 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the obsolete TE Connectivity Erni 923828 is based on electrical and mechanical parameter alignment. The substitute part must satisfy the following criteria:

Critical Matching Parameters:

• Connector type: Header with male pins
• Position count: 55 positions
• Pitch specification: 0.079" (2.00mm)
• Row configuration: 5 rows
• Mounting configuration: Through-hole, right-angle orientation
• Termination method: Press-fit
• Contact finish: Gold plating
• Operating temperature range: -55°C ~ 125°C minimum

The TE Connectivity AMP Connectors part number 5106012-1 satisfies all critical parameters and is classified as an active product with current manufacturing status.

Parameter Comparison

Engineering Selection Recommendations

The TE Connectivity AMP Connectors 5106012-1 is the designated substitute for the obsolete TE Connectivity Erni 923828. Selection is based on the following engineering criteria:

Product Status: The substitute part maintains active manufacturing status, ensuring long-term availability and supply chain continuity compared to the obsolete main part.

Compliance Certifications: Both parts maintain equivalent environmental compliance. The main part is ROHS3 compliant, while the substitute is RoHS compliant. Both parts carry MSL 1 (Unlimited) moisture sensitivity ratings and are classified under ECCN EAR99 for export control purposes.

Electrical and Mechanical Compatibility: The substitute part matches all critical electrical and mechanical parameters including connector type, position count, pitch, row configuration, mounting orientation, termination method, and contact finish. Operating temperature ranges are identical at -55°C ~ 125°C.

Additional Electrical Ratings: The substitute part provides specified electrical ratings including 1.5 A current rating and 500Vrms voltage rating, which were not provided for the main part.

Packaging Consideration: The substitute is supplied in tube packaging rather than tray packaging. This represents a packaging format change that may require adjustment to receiving and inventory procedures.

Frequently Asked Questions (FAQ)

Q: Can the TE Connectivity AMP 5106012-1 be used as a direct replacement for the TE Connectivity Erni 923828?

A: Yes. Both connectors share identical specifications for connector type, position count, pitch, row configuration, mounting type, termination method, contact finish, and operating temperature range. The substitute part is actively manufactured and maintains equivalent compliance certifications.

Q: What is the primary reason for substitution?

A: The main part (923828) is classified as obsolete. The substitute part (5106012-1) is actively manufactured, ensuring continued availability for procurement and design applications.

Q: Are there differences in mounting configuration between these parts?

A: Both parts feature through-hole, right-angle mounting. The main part is specified as "Through Hole, Right Angle" while the substitute is specified as "Board Edge, Through Hole, Right Angle." Both configurations are compatible with standard PCB mounting applications.

Q: What is the difference in packaging between these parts?

A: The main part is supplied in tray packaging, while the substitute is supplied in tube packaging. This represents a packaging format change that may affect receiving procedures and inventory storage requirements.

Q: Are the electrical ratings equivalent?

A: The substitute part specifies 1.5 A current rating and 500Vrms voltage rating. The main part does not provide voltage or current ratings in the available documentation. Both parts operate across the identical temperature range of -55°C ~ 125°C.

Q: Do both parts meet RoHS compliance requirements?

A: Yes. The main part is ROHS3 compliant, and the substitute part is RoHS compliant. Both parts carry MSL 1 (Unlimited) moisture sensitivity ratings and are unaffected or undefined by REACH regulations.

Q: What is the series designation for the substitute part?

A: The substitute part belongs to the Z-PACK series. The main part does not have a series designation provided.