Equivalent & Substitute Parts for 9-2176092-1

Part Overview

The TE Connectivity 9-2176092-1 is a 7.15 kOhms ±0.1% thin film chip resistor in 0805 (2012 Metric) package rated for 0.25W (1/4W) power dissipation. This component is part of the RP73P series from the Holsworthy product line and maintains active product status. Substitute parts are necessary when primary inventory is unavailable, when specific automotive certifications are required, or when alternative manufacturer sourcing is needed for supply chain continuity.

Substiute Parts

9-2176092-1

TE Connectivity Passive ProductIn Stock: 11019-2176092-1 Datasheet

Current PartRFQ

ERA-6AEB7151V

Panasonic Electronic ComponentsIn Stock: 17197ERA-6AEB7151V Datasheet

DirectRFQ

RG2012P-7151-B-T5

SusumuIn Stock: 24695RG2012P-7151-B-T5 Datasheet

DirectRFQ

RT0805BRD077K15L

YAGEOIn Stock: 9214RT0805BRD077K15L Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 9-2176092-1 is determined by the following critical parameters:

Mandatory Matching Parameters:

• Resistance value: 7.15 kOhms
• Tolerance: ±0.1%
• Package / Case: 0805 (2012 Metric)
• Composition: Thin Film
• Temperature Coefficient: ±25ppm/°C
• Operating Temperature Range: -55°C ~ 155°C
• RoHS Status: ROHS3 Compliant
• Moisture Sensitivity Level: 1 (Unlimited)

Allowable Variation:

• Power Rating: Substitute parts rated at 0.125W (1/8W) are acceptable as they represent a lower power dissipation specification within the same thermal envelope and package footprint. The 0805 package dimensions remain identical across all listed parts.

All substitute parts listed maintain identical electrical characteristics, package dimensions, and environmental compliance specifications. The primary distinction among substitutes is the power rating and manufacturer-specific features such as automotive certification and anti-sulfur properties.

Parameter Comparison

Engineering Selection Recommendations

All listed substitute parts maintain active product status and full ROHS3 compliance, ensuring long-term availability and regulatory conformance.

ERA-6AEB7151V (Panasonic Electronic Components): This substitute incorporates Automotive AEC-Q200 certification, qualifying it for automotive applications requiring enhanced reliability standards. The 0.125W power rating is suitable for circuits where the original 0.25W specification provides design margin.

RG2012P-7151-B-T5 (Susumu): This substitute combines Automotive AEC-Q200 certification with anti-sulfur properties, providing enhanced environmental protection in corrosive atmospheres. The lowest seated height of 0.020" (0.50mm) offers advantages in space-constrained PCB layouts. The 0.125W power rating applies standard design margin considerations.

RT0805BRD077K15L (YAGEO): This substitute provides a standard thin film 0805 resistor without automotive-specific certifications. It is suitable for general industrial and consumer applications where AEC-Q200 qualification is not required. The 0.125W power rating follows standard design margin practices.

Selection among substitutes should be based on application requirements: automotive applications benefit from AEC-Q200 certified options, space-constrained designs favor the Susumu part with minimum height, and general applications accept any listed substitute.

Frequently Asked Questions (FAQ)

Q: Can the 0.125W (1/8W) rated substitute parts replace the original 0.25W (1/4W) rated 9-2176092-1?

A: Yes. The 0.125W rating on substitute parts represents a lower power dissipation specification. In applications where the original 0.25W rating was selected with design margin, the 0.125W substitute is acceptable. Circuit design must confirm that actual power dissipation does not exceed 0.125W under all operating conditions.

Q: Are all substitute parts mechanically compatible with the original 9-2176092-1?

A: Yes. All substitute parts use the identical 0805 (2012 Metric) package with matching length and width dimensions of 0.079" L x 0.049" W (2.00mm x 1.25mm). Seated heights vary slightly (0.020" to 0.026"), but all remain within standard PCB assembly tolerances for 0805 components.

Q: What is the difference between AEC-Q200 certified and non-certified substitutes?

A: AEC-Q200 certification (ERA-6AEB7151V and RG2012P-7151-B-T5) indicates compliance with automotive reliability standards. These parts are suitable for automotive applications. The non-certified RT0805BRD077K15L is suitable for general industrial and consumer applications.

Q: Does the anti-sulfur feature of the RG2012P-7151-B-T5 provide additional benefits?

A: Anti-sulfur properties protect the component in environments with hydrogen sulfide exposure or corrosive atmospheres. This feature is beneficial in industrial, marine, or chemical processing applications. For standard indoor environments, this feature provides no functional advantage.

Q: Are all substitute parts ROHS3 compliant?

A: Yes. All listed substitute parts maintain ROHS3 compliance, ensuring regulatory conformance for applications subject to RoHS directives.

Q: What is the significance of Moisture Sensitivity Level 1 (Unlimited)?

A: MSL 1 indicates unlimited shelf life without moisture baking requirements. All listed parts, including the original 9-2176092-1, require no special moisture control during storage or handling.