TE Connectivity 9-2176088-0 Equivalent & Substitute Parts

Part Overview

The TE Connectivity 9-2176088-0 is a thin film chip resistor with a resistance value of 7.68 kOhms and a tolerance of ±0.1%. This component is packaged in the 0603 (1608 Metric) surface mount format with a power rating of 0.167W (1/6W). The part is manufactured as part of the RP73P series from the Holsworthy product line and maintains Active product status. Substitute parts are identified to provide alternative sourcing options when the primary component is unavailable or when specific application requirements necessitate alternative specifications within compatible electrical and mechanical parameters.

Substiute Parts

9-2176088-0

TE Connectivity Passive ProductIn Stock: 11659-2176088-0 Datasheet

Current PartRFQ

RG1608P-7681-B-T5

SusumuIn Stock: 28817RG1608P-7681-B-T5 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the TE Connectivity 9-2176088-0 is determined by strict equivalence across the following critical parameters:

Electrical Parameters:

• Resistance value: 7.68 kOhms (exact match required)
• Tolerance: ±0.1% (exact match required)
• Temperature coefficient: ±25ppm/°C (exact match required)
• Operating temperature range: -55°C ~ 155°C (exact match required)

Mechanical Parameters:

• Package format: 0603 (1608 Metric) (exact match required)
• Composition: Thin Film (exact match required)
• Number of terminations: 2 (exact match required)

Compliance Parameters:

• RoHS3 Compliant status (required)
• Moisture Sensitivity Level 1 (required)

The substitute part RG1608P-7681-B-T5 from Susumu meets all critical electrical and mechanical parameters. The power rating difference (0.1W versus 0.167W) represents a conservative specification in the substitute part, which is acceptable for direct substitution in applications designed for the original component's power rating.

Parameter Comparison

Engineering Selection Recommendations

The Susumi RG1608P-7681-B-T5 is a direct electrical and mechanical substitute for the TE Connectivity 9-2176088-0. Both components are Active products with ROHS3 compliance and identical electrical specifications including resistance, tolerance, temperature coefficient, and operating temperature range.

The substitute part carries AEC-Q200 automotive qualification and anti-sulfur features, which represent additional capabilities beyond the original component specification. These features do not conflict with applications designed for the TE Connectivity part and provide enhanced reliability in automotive and corrosive environments.

The lower power rating of the substitute part (0.1W versus 0.167W) is acceptable for direct substitution in circuits designed for the original component, as the original part's power rating provides design margin. Applications requiring the full 0.167W power dissipation capacity should be evaluated against actual circuit requirements before substitution.

Both components are packaged in 0603 (1608 Metric) format with identical footprints and termination configurations, ensuring mechanical compatibility in printed circuit board designs.

Frequently Asked Questions (FAQ)

Q: Can the Susumu RG1608P-7681-B-T5 be used as a direct replacement for the TE Connectivity 9-2176088-0?

A: Yes. Both components share identical electrical specifications (7.68 kOhms, ±0.1% tolerance, ±25ppm/°C temperature coefficient, -55°C ~ 155°C operating range) and mechanical specifications (0603 package, thin film composition, 2 terminations). The substitute part is electrically and mechanically compatible.

Q: What is the difference in power rating between these components?

A: The TE Connectivity part is rated at 0.167W (1/6W), while the Susumu substitute is rated at 0.1W (1/10W). The substitute part has a lower power rating. For applications operating below 0.1W dissipation, both parts are equivalent. Applications requiring power dissipation between 0.1W and 0.167W should be evaluated against actual circuit requirements.

Q: Are both components RoHS compliant?

A: Yes. Both the TE Connectivity 9-2176088-0 and the Susumu RG1608P-7681-B-T5 are ROHS3 compliant with Moisture Sensitivity Level 1 (Unlimited).

Q: What does AEC-Q200 qualification mean for the substitute part?

A: AEC-Q200 is an automotive industry qualification standard for passive components. The Susumu part carries this certification, indicating it meets automotive reliability and performance requirements. This qualification does not affect compatibility with non-automotive applications.

Q: Are the physical dimensions identical between these components?

A: Both components use the 0603 (1608 Metric) package format. The TE Connectivity part measures 0.061" L x 0.031" W (1.55mm x 0.80mm) with a maximum seated height of 0.022" (0.55mm). The Susumu part measures 0.063" L x 0.031" W (1.60mm x 0.80mm) with a maximum seated height of 0.020" (0.50mm). These minor dimensional variations are within standard 0603 package tolerances and do not affect PCB footprint compatibility.

Q: What is the anti-sulfur feature on the Susumu part?

A: Anti-sulfur treatment protects the component from corrosion caused by sulfur-containing compounds in the environment. This feature enhances reliability in industrial and automotive applications but does not affect electrical performance or compatibility with standard applications.