Amphenol ICC 92086-308 Rectangular Connector - Equivalent & Substitute Parts

Part Overview

The Amphenol ICC 92086-308 is an 8-position receptacle connector with 0.079" (2.00mm) pitch, designed for surface mount applications with gold-plated mating contacts. This connector is classified as obsolete, which necessitates identification of active equivalent parts for new designs and ongoing production requirements. The part features a push-pull fastening mechanism and board guide, making it suitable for applications requiring secure, guided mating.

Substiute Parts

92086-308

Amphenol ICC (FCI)In Stock: 82392086-308 Datasheet

Current PartRFQ

92086-308LF

Amphenol ICC (FCI)In Stock: 73092086-308LF Datasheet

DirectRFQ

M22-6340442

Harwin Inc.In Stock: 1570M22-6340442 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution for the 92086-308 is determined by strict equivalence across the following critical parameters:

• Connector Type & Contact Configuration: Receptacle with female socket contacts
• Position Count & Pitch: 8 positions at 0.079" (2.00mm) mating pitch with 2-row configuration
• Mounting & Termination: Surface mount with solder termination
• Fastening Mechanism: Push-pull fastening with board guide
• Contact Material & Finish: Gold-plated mating surface on beryllium copper or equivalent base material

The identified substitutes maintain these core electrical and mechanical parameters, ensuring direct compatibility in applications designed for the 92086-308.

Parameter Comparison

Engineering Selection Recommendations

Primary Substitute: 92086-308LF

The 92086-308LF is the direct successor to the obsolete 92086-308, manufactured by the same supplier (Amphenol ICC). This part maintains identical electrical and mechanical specifications while offering active product status and RoHS compliance. The primary distinction is the contact finish on the post terminals, which changes from tin-lead to gold. This part is recommended for applications requiring continuity with the original design while ensuring ongoing component availability.

Alternative Substitute: M22-6340442

The Harwin M22-6340442 provides an alternative from a different manufacturer while maintaining core connector specifications. This part offers ROHS3 compliance, specified operating temperature range (-40°C ~ 105°C), and rated electrical parameters (2A current, 500VAC voltage). The insulation height is marginally increased (0.169" versus 0.157"), and the contact material differs (phosphor bronze versus beryllium copper). This part is suitable for applications where multi-source qualification is required or where Harwin components are preferred.

Frequently Asked Questions (FAQ)

Q: Can the 92086-308LF be used as a direct replacement for the 92086-308?

A: Yes. The 92086-308LF maintains identical pitch, position count, mounting type, and fastening mechanism. The primary differences are product status (active versus obsolete) and RoHS compliance. The contact finish on the post terminals differs, but this does not affect mating compatibility.

Q: What is the difference between the 92086-308LF and M22-6340442?

A: Both parts share the same 8-position, 0.079" pitch configuration and push-pull fastening. The M22-6340442 is manufactured by Harwin and includes specified operating temperature and electrical ratings. The insulation height is 0.30mm taller, and the contact base material is phosphor bronze rather than beryllium copper. Mechanical compatibility is maintained, but the parts are from different manufacturers.

Q: Are there packaging differences between these substitutes?

A: The 92086-308 packaging is not specified. The 92086-308LF is supplied in tube packaging. The M22-6340442 is also supplied in tube packaging. Confirm packaging requirements with your procurement specifications.

Q: Does the gold finish thickness difference affect compatibility?

A: The 92086-308 and 92086-308LF both specify 15.0µin (0.38µm) gold finish thickness on mating contacts. The M22-6340442 specifies flash gold finish. All three parts maintain gold-plated mating surfaces suitable for the same applications. The difference in finish thickness does not affect electrical or mechanical mating.

Q: Which substitute should be selected for new designs?

A: For new designs, the 92086-308LF is recommended as the primary choice due to manufacturer continuity and RoHS compliance. The M22-6340442 is suitable if multi-source qualification or Harwin component standardization is required.