TE Connectivity AMP Connectors 9-160479-5 Equivalent & Substitute Parts

Part Overview

The TE Connectivity AMP Connectors 9-160479-5 is a 0.187" (4.75mm) Quick Connect Female Crimp Connector designed for 14-16 AWG wire applications with non-mating end insulation. This component is classified as Obsolete, necessitating identification of active equivalent parts for ongoing procurement and design applications. The part belongs to the Faston and PIDG series of quick-connect terminals and is ROHS3 compliant with MSL 1 rating.

Substiute Parts

9-160479-5

TE Connectivity AMP ConnectorsIn Stock: 11279-160479-5 Datasheet

Current PartRFQ

184235-1

TE Connectivity AMP ConnectorsIn Stock: 9897184235-1 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the obsolete 9-160479-5 is determined by strict equivalence across the following critical parameters:

Electrical Compatibility Parameters:

• Tab Width: 0.187" (4.75mm)
• Tab Thickness: 0.032" (0.81mm)
• Wire Gauge Rating: 14-16 AWG
• Gender: Female
• Termination Method: Crimp

Mechanical Compatibility Parameters:

• Tab Length: 0.250" (6.35mm)
• Mounting Type: Free Hanging (In-Line)
• Insulation Type: Non-Mating End Insulated
• Series Designation: Faston, PIDG

Compliance Parameters:

• RoHS Status: ROHS3 Compliant
• MSL Rating: 1 (Unlimited)

The substitute part 184235-1 maintains equivalence across all critical electrical and mechanical parameters, with the distinction that it carries Active product status and improved inventory availability.

Parameter Comparison

Engineering Selection Recommendations

Primary Substitute: TE Connectivity AMP Connectors 184235-1

The 184235-1 is the manufacturer-recommended substitute for the obsolete 9-160479-5. Selection of this part is based on the following engineering criteria:

Product Status Advantage: The 184235-1 carries Active product status, ensuring continued availability and manufacturer support, whereas the 9-160479-5 is Obsolete and subject to discontinuation.

Compliance Equivalence: Both parts maintain ROHS3 compliance and MSL 1 (Unlimited) rating, satisfying regulatory and environmental requirements without modification.

Electrical and Mechanical Equivalence: The substitute part maintains identical specifications across all critical parameters including tab width (0.187"), tab thickness (0.032"), wire gauge rating (14-16 AWG), tab length (0.250"), and mounting configuration (Free Hanging In-Line).

Inventory Availability: The 184235-1 demonstrates significantly higher inventory availability (9854 Pcs) compared to the main part (1090 Pcs), supporting supply chain continuity.

Material Consideration: The substitute part uses Brass contact material versus Phosphor Bronze in the original part. Both materials are tin-finished and suitable for the specified wire gauge and electrical application within the Faston/PIDG series parameters.

Dimensional Variance: The overall length differs by 0.062" (1.58mm), with the substitute being shorter (0.800" versus 0.862"). This dimensional change does not affect electrical or mechanical compatibility within the quick-connect terminal interface.

Frequently Asked Questions (FAQ)

Q: Can 184235-1 be used as a direct replacement for 9-160479-5 in existing designs?

A: Yes. The 184235-1 maintains electrical and mechanical equivalence across all critical parameters including tab width, thickness, wire gauge rating, and mounting type. The overall length difference of 0.062" does not affect terminal interface compatibility.

Q: What is the significance of the contact material difference between Phosphor Bronze and Brass?

A: Both materials are acceptable for 14-16 AWG crimp terminal applications within the Faston/PIDG series. Both are tin-finished and provide equivalent electrical conductivity and corrosion resistance for this application category.

Q: Are there any compliance or certification differences between the two parts?

A: No. Both parts are ROHS3 compliant and carry MSL 1 (Unlimited) rating. No additional testing or certification is required for substitution.

Q: Why is the 9-160479-5 listed as Obsolete?

A: The 9-160479-5 has been discontinued by the manufacturer. The 184235-1 is the active equivalent part and is the recommended selection for new designs and ongoing procurement.

Q: Does the packaging difference affect part selection?

A: The 184235-1 is supplied in Bulk packaging, whereas the original part packaging is not specified. Bulk packaging is standard for terminal components and does not affect electrical or mechanical performance.

Q: Are both parts suitable for the same wire gauge applications?

A: Yes. Both parts are rated for 14-16 AWG wire and maintain identical tab width (0.187") and thickness (0.032") specifications required for proper crimp connection.

Q: What is the MSL 1 rating significance?

A: MSL 1 (Unlimited) indicates the component has unlimited shelf life and requires no special moisture control during storage or handling, making both parts suitable for standard warehouse and assembly environments.