Weidmüller 915036 Terminal Block: Equivalent & Substitute Parts

Part Overview

The Weidmüller 915036 is a 6-position wire-to-board terminal block with 0.200" (5.08mm) pitch, designed for horizontal mounting through PCB holes. This component belongs to the Omnimate LPA series and is classified as obsolete. Due to its discontinued status, identifying functionally compatible substitute parts is essential for ongoing system maintenance, redesigns, and procurement continuity.

Substiute Parts

915036

WeidmüllerIn Stock: 1195915036 Datasheet

Current PartRFQ

1330750000

WeidmüllerIn Stock: 14211330750000 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution compatibility for the Weidmüller 915036 is determined by the following critical parameters:

• Pitch (0.200" / 5.08mm): Must match exactly for PCB hole alignment
• Position Count (6): Functional requirement for circuit connectivity
• Mating Orientation (Horizontal with Board): Physical mounting constraint
• Mounting Type (Through Hole): PCB assembly method
• Voltage Rating (300 V minimum): Electrical safety requirement
• Current Rating (10 A minimum): Load capacity requirement
• Wire Gauge Compatibility (14-22 AWG or broader range): Wire termination capability

The substitute part Weidmüller 1330750000 meets all critical substitution criteria. It maintains identical pitch, position count, orientation, and mounting type. The substitute provides enhanced electrical performance (20 A current rating versus 10 A) and expanded wire gauge acceptance (12-24 AWG versus 14-22 AWG), making it a direct functional replacement.

Parameter Comparison

Engineering Selection Recommendations

The Weidmüller 1330750000 is the designated substitute for the obsolete 915036. Selection is based on the following engineering criteria:

Product Status: The 915036 is obsolete, while the 1330750000 is active and currently manufactured, ensuring long-term availability and supply chain continuity.

Electrical Compliance: The 1330750000 is RoHS Compliant, meeting modern regulatory requirements. The 915036 status is not applicable, reflecting its legacy classification.

Regulatory Alignment: Both parts are REACH Unaffected and classified as EAR99, maintaining consistent export and compliance posture.

Functional Equivalence: The substitute maintains all critical mechanical and electrical parameters required for direct replacement. The enhanced current rating (20 A versus 10 A) and expanded wire gauge range (12-24 AWG versus 14-22 AWG) provide additional design margin without compromising compatibility.

Termination Method Difference: The 915036 uses screw-based termination, while the 1330750000 employs screwless push-in spring technology. This represents a functional improvement in assembly efficiency and does not affect electrical performance or circuit operation.

Frequently Asked Questions (FAQ)

Q: Can the Weidmüller 1330750000 directly replace the 915036 on existing PCBs?

A: Yes. Both parts share identical pitch (0.200" / 5.08mm), position count (6), mating orientation (horizontal with board), and through-hole mounting type. PCB hole patterns are compatible without modification.

Q: What is the primary reason for substitution?

A: The 915036 is obsolete and no longer manufactured. The 1330750000 is an active product from the same manufacturer, providing equivalent functionality with enhanced electrical performance and modern compliance certifications.

Q: Does the wire termination method change affect circuit performance?

A: No. The 915036 uses screw-top clamping, while the 1330750000 uses screwless push-in spring termination. Both methods provide secure electrical connections and are functionally equivalent for circuit operation.

Q: Are there wire gauge compatibility concerns?

A: The 1330750000 accepts a broader wire gauge range (12-24 AWG) compared to the 915036 (14-22 AWG). This expanded range ensures compatibility with existing wire specifications and provides additional design flexibility.

Q: What is the current rating difference, and does it matter?

A: The 1330750000 is rated for 20 A, while the 915036 is rated for 10 A. If the original design operates at or below 10 A, the substitute provides additional current capacity margin. If the design requires exactly 10 A operation, the substitute remains fully compatible and safe.

Q: Are both parts RoHS compliant?

A: The 1330750000 is RoHS Compliant. The 915036 status is not applicable, reflecting its classification as a legacy component predating modern compliance requirements.

Q: What is the packaging difference?

A: The 915036 packaging is unspecified in available data. The 1330750000 is supplied in bulk packaging, standard for active production components.