Honeywell 914CE1-3 Snap Action Switch: Equivalent & Substitute Parts

Part Overview

The Honeywell 914CE1-3 is an SPDT snap action switch rated for 5A AC at 240V and 3A DC at 28V. This chassis-mounted switch features a round pin plunger actuator with cable leads and IP66 ingress protection. The product is active and in stock with 1050 units available. Equivalent and substitute parts are identified when component availability is limited, supply chain disruptions occur, or design flexibility permits selection from qualified alternatives meeting the same electrical and mechanical specifications.

Key Parameters

Parameter	Value
Circuit Configuration	SPDT (Single Pole Double Throw)
Switch Function	On-Momentary
Current Rating (AC)	5A
Current Rating (DC)	3A
Voltage Rating (AC)	240V
Voltage Rating (DC)	28V
Actuator Type	Round Pin Plunger
Mounting Type	Chassis Mount
Termination Style	Cable Leads
Ingress Protection	IP66
Operating Force	1200gf
Operating Position	0.618" (15.7mm)
Mechanical Life	10,000,000 Cycles
Operating Temperature Range	0°C to 105°C
RoHS Status	RoHS Compliant

Substitute Part Grouping Explanation

Substitution of the Honeywell 914CE1-3 is permissible when the alternative part meets or exceeds the following critical parameters:

Mandatory Matching Criteria:

Circuit configuration: SPDT
Switch function: On-Momentary
Actuator type: Round pin plunger
Mounting type: Chassis mount
Termination style: Cable leads
Operating force: 1200gf
Operating position: 0.618" (15.7mm)
Mechanical life: 10,000,000 cycles minimum

Electrical Compatibility Criteria:

AC current rating: 5A minimum
AC voltage rating: 240V minimum
DC current rating: 3A minimum
DC voltage rating: 28V minimum

Environmental & Compliance Criteria:

Ingress protection: IP66 minimum
RoHS compliance required

The Omron D4C-1601 meets all mandatory matching criteria and exceeds electrical ratings (5A AC at 250V, 4A DC at 30V) and ingress protection (IP67). This part qualifies as a direct substitute.

Parameter Comparison

Parameter	Honeywell 914CE1-3	Omron D4C-1601	Compatibility
Manufacturer	Honeywell Sensing and Productivity Solutions	Omron Automation and Safety	Different manufacturers
Circuit Configuration	SPDT	SPDT	Match
Switch Function	On-Momentary	On-Momentary	Match
Current Rating (AC)	5A	5A	Match
Current Rating (DC)	3A	4A	Substitute exceeds
Voltage Rating (AC)	240V	250V	Substitute exceeds
Voltage Rating (DC)	28V	30V	Substitute exceeds
Actuator Type	Round Pin Plunger	Round Pin Plunger	Match
Mounting Type	Chassis Mount	Chassis Mount	Match
Termination Style	Cable Leads	Cable Leads	Match
Ingress Protection	IP66	IP67	Substitute exceeds
Operating Force	1200gf	1200gf	Match
Release Force	450gf	450gf	Match
Operating Position	0.618" (15.7mm)	0.618" (15.7mm)	Match
Pretravel	0.071" (1.8mm)	0.071" (1.8mm)	Match
Overtravel	0.118" (3.0mm)	0.118" (3.0mm)	Match
Mechanical Life	10,000,000 Cycles	10,000,000 Cycles	Match
Operating Temperature Range	0°C to 105°C	-10°C to 70°C	Substitute has narrower range
RoHS Status	RoHS Compliant	ROHS3 Compliant	Both compliant

Engineering Selection Recommendations

Honeywell 914CE1-3 Selection:

Primary choice when operating temperature range of 0°C to 105°C is required
Preferred for applications requiring extended high-temperature operation above 70°C
Active product status with 1050 units in stock ensures immediate availability
RoHS Compliant certification meets environmental requirements

Omron D4C-1601 Selection:

Acceptable substitute when operating temperature does not exceed 70°C
Provides enhanced ingress protection (IP67 vs. IP66) for applications requiring waterproof operation
Exceeds electrical ratings, providing design margin for AC and DC applications
ROHS3 Compliant certification meets current environmental standards
923 units in stock provide adequate availability

Selection Criteria:

If maximum operating temperature exceeds 70°C, use Honeywell 914CE1-3
If maximum operating temperature is 70°C or below and waterproof operation is required, Omron D4C-1601 is acceptable
Both parts are active products with established supply chains

Frequently Asked Questions (FAQ)

Q: Can the Omron D4C-1601 replace the Honeywell 914CE1-3 in all applications?

A: The Omron D4C-1601 is a functional substitute for applications where the maximum operating temperature does not exceed 70°C. The Honeywell 914CE1-3 operates to 105°C and must be used for high-temperature applications. All other electrical and mechanical parameters are compatible.

Q: What is the difference in ingress protection between these parts?

A: The Honeywell 914CE1-3 is rated IP66 (dust tight, water resistant). The Omron D4C-1601 is rated IP67 (dust tight, waterproof). IP67 provides a higher level of protection and is suitable for submersion in water up to 1 meter for 30 minutes.

Q: Are the cable lead lengths identical?

A: The Honeywell 914CE1-3 has a cable length of 3 feet. The Omron D4C-1601 has a cable length of 3 meters. This difference must be evaluated for the specific application layout and installation requirements.

Q: Do both parts have the same mechanical life expectancy?

A: Yes. Both the Honeywell 914CE1-3 and Omron D4C-1601 are rated for 10,000,000 mechanical cycles, providing equivalent durability and service life.

Q: Which part has better electrical ratings?

A: The Omron D4C-1601 exceeds the electrical ratings of the Honeywell 914CE1-3. The D4C-1601 is rated 5A AC at 250V (vs. 240V) and 4A DC at 30V (vs. 3A at 28V). Both ratings are sufficient for applications designed for the Honeywell part.

Q: Are both parts RoHS compliant?

A: Yes. The Honeywell 914CE1-3 is RoHS Compliant. The Omron D4C-1601 is ROHS3 Compliant. Both meet environmental compliance requirements for electronic components.

Q: What is the operating force difference between these switches?

A: Both switches have identical operating force specifications of 1200gf and release force of 450gf. The actuation characteristics are equivalent.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message