Weidmüller 911713 Terminal Block Connector - Equivalent & Substitute Parts

Part Overview

The Weidmüller 911713 is a 3-position feed-through terminal block connector from the SAK series, designed for screw termination applications. This component features a beige polyamide (PA66) insulation body rated for 27 A at 380V per IEC standards, with a 6.0mm terminal width and 4mm² wire gauge capacity. The product is classified as obsolete, making identification of functionally equivalent alternatives essential for ongoing maintenance, repair, and system continuity in industrial control and distribution applications.

Substiute Parts

911713

WeidmüllerIn Stock: 942911713 Datasheet

Current PartRFQ

Key Parameters

Substitute Part Grouping Explanation

No direct substitute parts are currently available in the provided database. Substitution for the Weidmüller 911713 terminal block connector must be evaluated based on the following critical parameters:

• Number of Positions and Levels: 3 positions, 2 levels
• Terminal Width: 6.0mm
• Termination Method: Screw termination
• Current Rating: 27 A (IEC)
• Voltage Rating: 380V (IEC)
• Wire Gauge Compatibility: 4mm²
• Insulation Material: Polyamide (PA66) with UL94 V-2 flammability rating
• Mechanical Form Factor: Feed-through configuration with 9mm stripping length

Alternative components must match these specifications to ensure mechanical fit, electrical performance, and safety compliance in the original application circuit.

Parameter Comparison

No substitute parts are available for comparison at this time.

Engineering Selection Recommendations

The Weidmüller 911713 is an obsolete component. When sourcing replacements, prioritize terminal block connectors that maintain identical electrical ratings (27 A, 380V IEC), mechanical configuration (3 positions, 2 levels, 6.0mm terminal width), and material specifications (PA66 insulation, UL94 V-2 rating). Verify that any alternative component accommodates the same wire gauge range (4mm²) and stripping length (9mm) to ensure compatibility with existing wiring harnesses and installation procedures. Compliance with REACH and RoHS requirements should be confirmed for the replacement component based on current regulatory requirements in the target market.

Frequently Asked Questions (FAQ)

Q: What makes a terminal block connector a valid substitute for the Weidmüller 911713?

A: A valid substitute must match the 3-position, 2-level configuration, 6.0mm terminal width, 27 A current rating at 380V (IEC), 4mm² wire gauge capacity, screw termination method, and PA66 insulation material with UL94 V-2 flammability rating. The feed-through design and 9mm stripping length must also be maintained.

Q: Why is the Weidmüller 911713 classified as obsolete?

A: Obsolete status indicates the component is no longer manufactured by Weidmüller and is not available through standard distribution channels. Existing inventory may be available through specialized electronics distributors, but long-term availability is not guaranteed.

Q: Can I use a terminal block with different electrical ratings?

A: No. The 27 A current rating and 380V voltage rating are critical for safe operation in the original application. Using a component with lower ratings creates a safety hazard and may result in component failure or circuit damage.

Q: Does the insulation material matter when selecting a substitute?

A: Yes. The PA66 polyamide material with UL94 V-2 flammability rating provides specific thermal and fire-safety characteristics required for the application. Substitutes must use equivalent or superior insulation materials with matching or better flammability ratings.

Q: What is the significance of the 6.0mm terminal width?

A: Terminal width determines mechanical compatibility with mating connectors, DIN rail mounting systems, and adjacent components in the terminal block assembly. Deviations from 6.0mm will result in fit issues and potential installation failures.