Amphenol RF 901-10150 RP-SMA Connector Jack Equivalent & Substitute Parts

Part Overview

The Amphenol RF 901-10150 is an RP-SMA connector jack designed for 50-ohm coaxial RF applications. This right-angle, panel-mount connector features a male pin configuration with solder termination for both contact and shield. The connector is rated for frequencies up to 18 GHz and operates across a temperature range of -65°C to 165°C. As an active product with ROHS3 compliance and unlimited moisture sensitivity rating, the 901-10150 serves applications requiring reliable RF signal transmission in PCB-mounted configurations. Equivalent substitute parts are identified to provide alternative sourcing options when the primary part is unavailable or when inventory requirements necessitate alternative manufacturers.

Substiute Parts

901-10150

Amphenol RFIn Stock: 959901-10150 Datasheet

Current PartRFQ

142-4701-501

Cinch Connectivity SolutionsIn Stock: 3511142-4701-501 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the Amphenol RF 901-10150 are identified based on electrical and mechanical parameter equivalence. The substitution criteria are strictly limited to the following parameters:

Critical Matching Parameters:

• Connector Style: RP-SMA
• Connector Type: Jack, Male Pin
• Impedance: 50 Ohms
• Mounting Type: Panel Mount, Through Hole, Right Angle
• Contact Termination: Solder
• Shield Termination: Solder
• Frequency - Max: 18 GHz
• Operating Temperature: -65°C ~ 165°C
• Dielectric Material: Polytetrafluoroethylene (PTFE)
• Body Material: Brass
• Body Finish: Gold
• Center Contact Plating: Gold
• Mating Cycles: 500
• RoHS Status: ROHS3 Compliant
• Moisture Sensitivity Level: 1 (Unlimited)

Parts meeting all critical parameters are classified as direct electrical and mechanical equivalents suitable for component substitution in PCB-mounted RF applications.

Parameter Comparison

Engineering Selection Recommendations

The Cinch Connectivity Solutions 142-4701-501 is a direct equivalent substitute for the Amphenol RF 901-10150. Both connectors satisfy identical electrical and mechanical specifications across all critical parameters. Selection between these parts is based on availability, inventory status, and supply chain requirements rather than functional differences.

Both parts maintain active product status and comply with ROHS3 and REACH regulations. Both are classified under ECCN EAR99 and carry identical moisture sensitivity ratings. The connectors are functionally interchangeable in PCB-mounted RF applications requiring 50-ohm impedance, right-angle panel mounting, and solder termination up to 18 GHz.

Frequently Asked Questions (FAQ)

Q: Can the Cinch Connectivity Solutions 142-4701-501 be used as a direct replacement for the Amphenol RF 901-10150?

A: Yes. Both connectors meet identical specifications for connector style, impedance, mounting configuration, termination method, frequency rating, operating temperature range, and material composition. They are electrically and mechanically equivalent.

Q: Are there differences in the included components between these two parts?

A: Both connectors include three pieces: one connector, one nut, and one washer/lockwasher. The component descriptions are functionally equivalent.

Q: Do both parts comply with the same regulatory standards?

A: Yes. Both the Amphenol RF 901-10150 and Cinch Connectivity Solutions 142-4701-501 are ROHS3 compliant, REACH affected, and classified as EAR99 under export control regulations.

Q: What is the maximum frequency rating for these connectors?

A: Both connectors are rated for frequencies up to 18 GHz.

Q: What is the operating temperature range for these connectors?

A: Both connectors operate across a temperature range of -65°C to 165°C.

Q: Are these connectors suitable for PCB mounting applications?

A: Yes. Both connectors feature panel mount, through-hole, right-angle configurations with solder termination for PCB integration.

Q: What impedance rating do these connectors support?

A: Both connectors are rated for 50-ohm impedance, standard for RF coaxial applications.

Q: How many mating cycles are these connectors rated for?

A: Both connectors are rated for 500 mating cycles.