Amphenol RF 901-10116 SMA Coaxial Connector - Equivalent & Substitute Parts

Part Overview

The Amphenol RF 901-10116 is an SMA connector jack (female socket) rated for 50 ohms impedance with panel mount configuration and solder termination. This component is classified as Active product status and is RoHS3 compliant. Alternative equivalent and substitute parts are identified to support procurement flexibility, inventory management, and application-specific requirements where connector style, termination method, or mounting configuration may differ from the primary specification.

Substiute Parts

901-10116

Amphenol RFIn Stock: 1158901-10116 Datasheet

Current PartRFQ

901-10119

Amphenol RFIn Stock: 908901-10119 Datasheet

Parametric EquivalentRFQ

225532-3

TE Connectivity Aerospace, Defense and MarineIn Stock: 733225532-3 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the 901-10116 are classified into two categories based on electrical and mechanical parameter alignment:

Parametric Equivalent (901-10119): This part maintains identical electrical specifications (50 ohms, SMA style, jack/female socket, 3 GHz maximum frequency, -65°C to 165°C operating range, 500 mating cycles) and identical termination methods (solder contact, crimp shield). The primary difference is packaging format (bulk versus standard). Both parts share the same base product number (901-10) and are manufactured by Amphenol RF. This classification indicates direct functional interchangeability.

Similar Manufacturer Part (225532-3): This TE Connectivity part shares the SMA connector style, 50 ohm impedance, threaded fastening, and identical operating temperature range (-65°C to 165°C). However, it differs in connector type (plug/male pin versus jack/female socket), contact termination (crimp versus solder), mounting configuration (free hanging/in-line versus panel mount), and frequency capability (12.4 GHz versus 3 GHz). This part is suitable only for applications requiring male pin connectors with crimp termination and in-line mounting, and is not a direct replacement for panel-mounted jack applications.

Parameter Comparison

Engineering Selection Recommendations

For Direct Replacement (Panel Mount, Solder Termination, Jack Configuration):

The 901-10119 is the appropriate selection when the 901-10116 is unavailable. Both parts are Active status, ROHS3 compliant, and manufactured by Amphenol RF with identical electrical and mechanical specifications. The 901-10119 differs only in packaging format (bulk). Selection between these two parts depends solely on procurement quantity requirements and packaging compatibility with assembly processes.

For Alternative Applications (In-Line, Crimp Termination, Plug Configuration):

The 225532-3 is suitable only for applications requiring male pin connectors with crimp termination in free-hanging (in-line) configuration. This part is not a direct replacement for the 901-10116 due to connector type reversal (plug versus jack) and termination method difference (crimp versus solder). Additionally, the 225532-3 is RoHS non-compliant, which may restrict its use in applications subject to RoHS3 regulatory requirements. The higher frequency capability (12.4 GHz) of the 225532-3 is not relevant to applications designed for the 901-10116's 3 GHz maximum specification.

Frequently Asked Questions (FAQ)

Q: Can the 901-10119 be used as a direct replacement for the 901-10116?

A: Yes. Both parts are electrically and mechanically identical. They share the same impedance (50 ohms), connector style (SMA jack/female socket), termination methods (solder contact, crimp shield), mounting configuration (panel mount with bulkhead nut), frequency rating (3 GHz), operating temperature range (-65°C to 165°C), and mating cycle rating (500). The only difference is packaging format. Both are Active status and ROHS3 compliant.

Q: Why is the 225532-3 listed as a substitute if it has different connector type and termination?

A: The 225532-3 is classified as a similar part rather than a direct equivalent. It shares the SMA connector style, 50 ohm impedance, and operating temperature range. However, it is a plug (male pin) with crimp termination in free-hanging configuration, whereas the 901-10116 is a jack (female socket) with solder termination in panel mount configuration. The 225532-3 is suitable only for applications requiring the opposite connector gender and crimp termination method.

Q: What are the key parameters that determine substitutability?

A: For the 901-10116, the critical parameters are: connector style (SMA), connector type (jack/female socket), impedance (50 ohms), contact termination (solder), mounting type (panel mount), and frequency rating (3 GHz maximum). Any substitute must match all these parameters to ensure direct interchangeability. The 901-10119 meets all criteria. The 225532-3 does not match connector type, termination method, or mounting type.

Q: Is the 225532-3 suitable for RoHS3 compliant applications?

A: No. The 225532-3 is RoHS non-compliant, whereas the 901-10116 and 901-10119 are both ROHS3 compliant. Applications subject to RoHS3 regulatory requirements must use the 901-10116 or 901-10119.

Q: Does the higher frequency rating of the 225532-3 (12.4 GHz) provide an advantage?

A: The higher frequency capability of the 225532-3 is not applicable to applications designed for the 901-10116. The 901-10116 is specified for 3 GHz maximum frequency. Using a higher-frequency component does not improve performance in a 3 GHz application and introduces unnecessary cost and complexity. Frequency rating must match application requirements, not exceed them.

Q: What packaging differences exist between the 901-10116 and 901-10119?

A: The 901-10116 is supplied in standard packaging, while the 901-10119 is supplied in bulk packaging. Both contain identical connector components (1 connector, 1 bushing, 1 contact, 1 ferrule, 1 nut, 1 sleeve). Selection depends on assembly process requirements and procurement quantity.