Amphenol RF 901-10007 Equivalent & Substitute Parts

Part Overview

The Amphenol RF 901-10007 is a coaxial adapter connector that converts between SMA Plug (Male Pin) and 1.0/2.3 Plug (Male Pin) configurations. This adapter operates at 50 Ohms impedance with a maximum frequency rating of 4 GHz and is designed for free hanging (in-line) applications with snap-on and threaded fastening.

The 901-10007 is classified as obsolete. Substitute parts are necessary to maintain system compatibility and ensure continued availability for applications requiring SMA to 1.0/2.3 adapter functionality or equivalent RF connector solutions.

Substiute Parts

901-10007

Amphenol RFIn Stock: 1201901-10007 Datasheet

Current PartRFQ

901-9201-1A

Amphenol RFIn Stock: 1061901-9201-1A Datasheet

MFR RecommendedRFQ

901-9808-1

Amphenol RFIn Stock: 1062901-9808-1 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution for the 901-10007 is based on the following critical parameters that determine functional equivalence:

Primary Substitution Criteria:

• Impedance: 50 Ohms (mandatory match)
• Connector Style: SMA Plug, Male Pin (primary interface)
• Mounting Type: Free Hanging (In-Line)
• Fastening Type: Threaded
• Body Material: Stainless Steel with Gold finish
• Center Contact Material: Beryllium Copper with Gold plating
• Dielectric Material: Polytetrafluoroethylene (PTFE)
• RoHS Compliance: Required

The substitute parts listed (901-9201-1A and 901-9808-1) are SMA Plug connectors manufactured by Amphenol RF. While these parts do not provide the specific SMA to 1.0/2.3 adapter conversion of the original 901-10007, they represent the active product line equivalent for SMA connector applications at 50 Ohms impedance with compatible mechanical and electrical specifications.

Parameter Comparison

Engineering Selection Recommendations

Product Status Consideration: The 901-10007 is obsolete and no longer manufactured. The substitute parts 901-9201-1A and 901-9808-1 are active products from Amphenol RF and represent the current production equivalent for SMA connector applications.

Compliance and Certification: Both substitute parts meet ROHS3 compliance, which exceeds the RoHS Compliant status of the original part. Both substitutes carry REACH Affected designation and maintain the same ECCN (EAR99) and HTSUS (8536.69.4010) classifications as the main part.

Frequency Performance: The substitute parts operate at a maximum frequency of 18 GHz, which exceeds the 4 GHz maximum of the 901-10007. This enhanced frequency capability provides additional operational margin for RF applications.

Temperature Operating Range: The substitute parts support an extended operating temperature range of -65°C ~ 165°C compared to the main part's -40°C ~ 155°C range, providing broader environmental compatibility.

Mechanical Compatibility: Both substitute parts maintain the same 50 Ohm impedance, free hanging (in-line) mounting type, threaded fastening, and PTFE dielectric material as the original part. The gold-plated stainless steel construction ensures consistent RF performance and environmental durability.

Inventory Availability: 901-9201-1A: 994 Pcs New Original In Stock 901-9808-1: 1050 Pcs New Original In Stock

Frequently Asked Questions (FAQ)

Q: Can the 901-9201-1A or 901-9808-1 directly replace the 901-10007?

A: The substitute parts are SMA Plug connectors, while the 901-10007 is an SMA to 1.0/2.3 adapter. Direct replacement depends on your application requirements. If your system requires the specific SMA to 1.0/2.3 conversion function, these substitutes cannot provide that adapter conversion. However, if you require an SMA connector at 50 Ohms impedance with equivalent mechanical and electrical specifications, these parts are functionally compatible.

Q: What are the key electrical parameters that must match for substitution?

A: The critical electrical parameters are impedance (50 Ohms), connector style (SMA), gender configuration (Male Pin), and dielectric material (PTFE). All substitute parts match these specifications.

Q: Do the substitute parts have better frequency performance?

A: Yes. The 901-9201-1A and 901-9808-1 both support 18 GHz maximum frequency, compared to 4 GHz for the 901-10007. This provides enhanced capability for higher-frequency RF applications.

Q: Are there differences between the two substitute parts?

A: Both 901-9201-1A and 901-9808-1 share identical electrical and mechanical specifications. The primary difference is packaging: 901-9201-1A is supplied in Bulk packaging, while 901-9808-1 packaging is not specified. Both are active products with equivalent performance characteristics.

Q: What is the operating temperature difference?

A: The 901-10007 operates from -40°C to 155°C. The substitute parts operate from -65°C to 165°C, providing a wider temperature operating window suitable for more demanding environmental conditions.

Q: Are the substitute parts RoHS compliant?

A: Yes. Both substitute parts are ROHS3 Compliant, which exceeds the RoHS Compliant status of the original part. Both also carry REACH Affected designation.

Q: What fastening types are available?

A: The 901-10007 features both snap-on and threaded fastening. The substitute parts feature threaded fastening only. Verify that threaded fastening is compatible with your application requirements.

Q: Are the materials and finishes equivalent?

A: The substitute parts use stainless steel with gold finish and beryllium copper center contacts with gold plating. The original part uses beryllium copper and stainless steel with gold finish and passivation. All materials maintain the same RF performance characteristics and environmental durability.