EAO 901-.000-00 Equivalent & Substitute Parts

Part Overview

The EAO 901-.000-00 is a pushbutton switch with DPST-NO/NC circuit configuration, rated for 5A AC at 250V, designed for standard panel mount front installation. This part is classified as obsolete and has been replaced by the 901F.000-00 model. Identifying equivalent substitute parts is essential for maintaining system functionality and ensuring continued availability for repair, maintenance, and new installations where legacy component specifications must be met.

Substiute Parts

901-.000-00

EAOIn Stock: 801901-.000-00 Datasheet

Current PartRFQ

901F.000-00

EAOIn Stock: 1007901F.000-00 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution for the EAO 901-.000-00 is determined by strict equivalence across the following critical parameters:

• Circuit configuration: DPST-NO/NC
• Current rating: 5A (AC)
• Voltage rating: 250V AC
• Mounting type: Panel Mount, Front
• Panel cutout dimensions: Circular - 16.00mm Dia
• Termination style: Solder, Quick Connect - 0.110" (2.8mm)
• Ingress protection: IP40
• Series compatibility: 55 - Swisstac

The substitute part must maintain identical electrical specifications, mechanical interface dimensions, and environmental protection ratings to ensure direct replacement capability without modification to the host system.

Parameter Comparison

Engineering Selection Recommendations

The EAO 901F.000-00 is the direct substitute for the obsolete 901-.000-00. Both parts are manufactured by EAO within the 55 - Swisstac series and maintain identical electrical and mechanical specifications. The 901F.000-00 carries Active product status, ensuring ongoing availability and supply chain continuity. Both parts meet ROHS3 compliance and REACH unaffected status, satisfying current regulatory requirements for electronic component procurement and deployment.

Frequently Asked Questions (FAQ)

Q: Can the 901F.000-00 be used as a direct replacement for the 901-.000-00?

A: Yes. The 901F.000-00 is electrically and mechanically equivalent to the 901-.000-00. Both parts share identical circuit configuration (DPST-NO/NC), current rating (5A AC), voltage rating (250V), mounting interface (Panel Mount, Front with 16.00mm circular cutout), and termination style (Solder, Quick Connect - 0.110" 2.8mm).

Q: What is the primary difference between these two part numbers?

A: The 901-.000-00 is classified as obsolete, while the 901F.000-00 is active. The substitution reflects a product line update by EAO with no change to functional or physical specifications.

Q: Are there packaging differences between the main part and substitute?

A: The 901-.000-00 is supplied in standard packaging, while the 901F.000-00 is supplied in bulk packaging. This distinction does not affect component performance or compatibility.

Q: Do both parts meet current compliance standards?

A: Yes. Both the 901-.000-00 and 901F.000-00 are ROHS3 compliant and REACH unaffected, meeting current regulatory requirements for electronic component use.

Q: What are the critical parameters for substitution verification?

A: Verify that any substitute part maintains the following specifications: DPST-NO/NC circuit, 5A AC current rating, 250V AC voltage rating, Panel Mount Front configuration, 16.00mm circular panel cutout, and Solder/Quick Connect 0.110" (2.8mm) termination.