8G1014C-Z Toggle Switch SPDT Equivalent & Substitute Parts

Part Overview

The 8G1014C-Z is a toggle switch with SPDT (Single Pole Double Throw) circuit configuration manufactured by Nidec Components Corporation. This component is rated for 25mA DC at 20V and features a through-hole, right-angle mounting configuration with a standard round actuator. The product is currently obsolete, making identification of suitable substitute parts essential for ongoing system maintenance and new design implementations where this switch type is required.

Substiute Parts

8G1014C-Z

Nidec Components CorporationIn Stock: 10158G1014C-Z Datasheet

Current PartRFQ

8G1014-Z

Nidec Components CorporationIn Stock: 11818G1014-Z Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

The 8G1014-Z qualifies as a direct substitute for the 8G1014C-Z based on the following matching parameters:

• Same manufacturer (Nidec Components Corporation)
• Identical series designation (8G)
• Identical circuit configuration (SPDT)
• Identical switch function (On-On)
• Identical mounting type (Through Hole, Right Angle)
• Identical actuator type and length (Standard Round, 6.80mm)
• Identical termination style (PC Pin)
• Identical operating temperature range (-25°C to 80°C)
• Identical electrical life rating (50,000 Cycles)
• Identical RoHS compliance status (ROHS3 Compliant)
• Identical MSL rating (1 - Unlimited)

The 8G1014-Z provides higher electrical ratings (6A AC / 4A DC at 125V AC / 30V DC) compared to the 8G1014C-Z (25mA DC at 20V), making it suitable for applications requiring the original part's specifications while offering additional capacity margin.

Parameter Comparison

Engineering Selection Recommendations

The 8G1014-Z is the appropriate substitute for the obsolete 8G1014C-Z. Both components share identical mechanical and functional characteristics, including mounting configuration, actuator specifications, and operating temperature range. The substitute part maintains full ROHS3 compliance and identical MSL rating, ensuring compatibility with existing environmental and regulatory requirements.

The 8G1014-Z is currently in active production status, providing supply chain continuity and availability advantages over the obsolete original part. The higher electrical ratings of the substitute part (4A DC at 30V versus 25mA at 20V) provide additional operational margin without affecting mechanical or thermal performance.

Frequently Asked Questions (FAQ)

Q: Can the 8G1014-Z directly replace the 8G1014C-Z in existing designs?

A: Yes. Both parts share identical mechanical dimensions, mounting configuration, circuit topology, and operating characteristics. The substitute part's higher electrical ratings do not affect compatibility in applications designed for the original part's specifications.

Q: What are the key differences between these parts?

A: The primary differences are product status (obsolete versus active) and electrical ratings. The 8G1014-Z provides 4A DC at 30V compared to the 8G1014C-Z's 25mA at 20V. Both maintain identical physical form factor and functional behavior.

Q: Are there packaging differences between these parts?

A: The 8G1014C-Z is supplied in standard packaging, while the 8G1014-Z is supplied in bulk packaging. Both use identical PC pin termination and through-hole mounting configuration.

Q: Do both parts meet the same compliance standards?

A: Yes. Both the 8G1014C-Z and 8G1014-Z are ROHS3 compliant with MSL rating 1 (Unlimited), meeting identical environmental and regulatory requirements.

Q: What is the basis for substitution between these parts?

A: Substitution is based on identical circuit configuration (SPDT), switch function (On-On), mounting type (Through Hole, Right Angle), actuator specifications (Standard Round, 6.80mm), termination style (PC Pin), operating temperature range (-25°C to 80°C), electrical life (50,000 Cycles), and compliance certifications (ROHS3, MSL 1).