Amphenol ICC 89883-407 Equivalent & Substitute Parts

Part Overview

The Amphenol ICC 89883-407 is a 14-position receptacle connector from the Dubox™ series, designed for board-to-board applications with 0.100" (2.54mm) pitch spacing. This connector features through-hole, right-angle mounting with tin-lead contact finish and push-pull fastening. The part is currently obsolete, making identification of suitable substitutes essential for ongoing system support and component procurement.

Substiute Parts

89883-407

Amphenol ICC (FCI)In Stock: 113589883-407 Datasheet

Current PartRFQ

89883-407LF

Amphenol ICC (FCI)In Stock: 94689883-407LF Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 89883-407 is determined by strict equivalence across the following critical parameters:

• Connector type (Receptacle)
• Number of positions (14)
• Pitch spacing (0.100" / 2.54mm)
• Row configuration (2 rows with 0.100" spacing)
• Mounting style (Through hole, right angle)
• Termination method (Solder)
• Fastening mechanism (Push-Pull)
• Insulation material (Thermoplastic, glass filled)
• Contact material (Phosphor bronze)
• Contact geometry (Square)
• Flammability rating (UL94 V-0)

The 89883-407LF meets all these criteria and is classified as a direct substitute. Variations in contact finish composition and thickness do not affect mechanical or electrical compatibility within the specified parameter set.

Parameter Comparison

Engineering Selection Recommendations

The 89883-407LF is the direct substitute for the obsolete 89883-407. Both connectors share identical mechanical and electrical specifications across all critical parameters. The primary differences are:

Product Status: The 89883-407LF is active and currently available, whereas the 89883-407 is obsolete. This makes the 89883-407LF the appropriate choice for new procurement and system support.

Regulatory Compliance: The 89883-407LF is RoHS compliant and REACH affected, compared to the non-compliant status of the original part. This distinction is relevant for applications subject to environmental regulations.

Contact Finish: The 89883-407LF uses tin finish with reduced thickness (78.7µin / 2.00µm) versus the tin-lead finish with greater thickness (196.9µin / 5.00µm) of the 89883-407. Both finishes are compatible with standard solder processes and do not affect connector functionality within the specified parameter set.

Packaging: The 89883-407LF is supplied in tube packaging, whereas packaging information for the 89883-407 is not specified.

Frequently Asked Questions (FAQ)

Q: Can the 89883-407LF be used as a direct replacement for the 89883-407?

A: Yes. The 89883-407LF meets all mechanical and electrical specifications of the 89883-407. Both connectors are 14-position receptacles with 0.100" pitch, through-hole right-angle mounting, and identical contact geometry and materials.

Q: What is the difference between tin-lead and tin contact finishes?

A: The 89883-407 uses tin-lead finish at 196.9µin thickness, while the 89883-407LF uses tin finish at 78.7µin thickness. Both are compatible with standard solder assembly processes. The tin finish in the 89883-407LF reflects RoHS compliance requirements.

Q: Why is the 89883-407 listed as obsolete?

A: The 89883-407 has been superseded by the 89883-407LF, which offers the same functionality with improved regulatory compliance (RoHS compliant).

Q: Are there any compatibility issues when substituting the 89883-407LF for the 89883-407?

A: No compatibility issues exist. The connectors are mechanically and electrically equivalent across all specified parameters, including pitch, row spacing, mounting style, and contact configuration.

Q: What packaging is available for the 89883-407LF?

A: The 89883-407LF is supplied in tube packaging.

Q: Do both connectors have the same moisture sensitivity level?

A: Yes. Both the 89883-407 and 89883-407LF have MSL 1 (Unlimited), indicating no moisture sensitivity restrictions.