Preci-Dip 890-80-004-10-001101 Equivalent & Substitute Parts

Part Overview

The Preci-Dip 890-80-004-10-001101 is a rectangular connector header designed for through-hole mounting applications. This unshrouded, 4-position male pin header operates at 0.100" (2.54mm) pitch and is rated for 3A current at 150VDC. The connector features tin-plated brass contacts with polyamide insulation, suitable for board-to-board connections in industrial and commercial applications. Product status is Active with 1061 units in stock. Equivalent and substitute parts are identified based on matching core electrical and mechanical parameters: pitch, number of positions, mounting type, termination method, contact material compatibility, and operating temperature range.

Key Parameters

Parameter	Specification
Pitch - Mating	0.100" (2.54mm)
Number of Positions	4
Number of Rows	1
Connector Type	Header
Contact Type	Male Pin
Mounting Type	Through Hole
Termination	Solder
Fastening Type	Push-Pull
Operating Temperature	-55°C ~ 125°C
Current Rating	3A
Voltage Rating	150VDC
Material Flammability Rating	UL94 V-0
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level	1 (Unlimited)

Substitute Part Grouping Explanation

Substitute parts for the Preci-Dip 890-80-004-10-001101 are identified through strict alignment of the following critical parameters:

Primary Matching Criteria:

Pitch: 0.100" (2.54mm) — mandatory for mechanical compatibility
Number of Positions: 4 — required for circuit connectivity
Connector Type: Header with male pin contacts
Mounting Type: Through Hole — PCB assembly method
Termination: Solder — connection to PCB
Fastening Type: Push-Pull — mating mechanism
Shrouding: Unshrouded — form factor
Style: Board to Board or Board to Board/Cable — application compatibility

Secondary Compatibility Parameters:

Operating Temperature Range: -55°C ~ 125°C or compatible range
Material Flammability: UL94 V-0 — safety standard
Contact Material: Brass or Phosphor Bronze — electrical conductivity
Insulation Material: Polyamide (PA), Nylon, or Polyester with glass fill — dielectric properties
RoHS3 Compliance — regulatory requirement
MSL 1 (Unlimited) — moisture sensitivity

Substitute parts may vary in contact finish (tin or gold), contact length dimensions, and insulation height within acceptable tolerances, provided core electrical and mechanical parameters remain compatible.

Parameter Comparison

Part Number	Manufacturer	Pitch (mm)	Positions	Rows	Contact Type	Mounting	Termination	Operating Temp (°C)	Current (A)	Voltage (VDC)	Contact Finish - Mating	RoHS Status	Inventory
890-80-004-10-001101	Preci-Dip	2.54	4	1	Male Pin	Through Hole	Solder	-55 ~ 125	3	150	Tin	ROHS3	1061
0022284042	Molex	2.54	4	1	Male Pin	Through Hole	Solder	—	—	—	Tin	ROHS3	1411
0022284045	Molex	2.54	4	1	Male Pin	Through Hole	Solder	—	—	—	Gold	ROHS3	65548
0022285044	Molex	2.54	4	1	Male Pin	Through Hole	Kinked Pin, Solder	—	—	—	Gold	ROHS3	6233
0901200124	Molex	2.54	4	1	Male Pin	Through Hole	Solder	-55 ~ 125	—	—	Tin	ROHS3	5696
0901200764	Molex	2.54	4	1	Male Pin	Through Hole	Solder	-55 ~ 125	—	—	Gold	ROHS3	1724
0901200924	Molex	2.54	4	1	Male Pin	Through Hole	Solder	-55 ~ 125	—	—	Gold	ROHS3	5783
334-10-104-00-010000	Mill-Max Manufacturing Corp.	2.54	4	1	Post, Extended	Through Hole	Solder	—	—	—	Gold	ROHS3	925
68000-104HLF	Amphenol ICC (FCI)	2.54	4	1	Male Pin	Through Hole	Solder	-65 ~ 125	3	—	Gold or Gold, GXT™	RoHS	1316
68000-204HLF	Amphenol ICC (FCI)	2.54	4	1	Male Pin	Through Hole	Solder	-65 ~ 125	3	—	Gold or Gold, GXT™	RoHS	6894
68001-104HLF	Amphenol ICC (FCI)	2.54	4	1	Male Pin	Through Hole	Solder	-65 ~ 125	3	—	Gold or Gold, GXT™	RoHS	2122
68001-404HLF	Amphenol ICC (FCI)	2.54	4	1	Male Pin	Through Hole	Solder	-65 ~ 125	3	—	Gold or Gold, GXT™	RoHS	Data not provided

Engineering Selection Recommendations

Primary Substitutes (Highest Compatibility):

The Molex C-Grid III series (0901200124, 0901200764, 0901200924) and Amphenol ICC BERGSTIK® II series (68000-104HLF, 68000-204HLF, 68001-104HLF, 68001-404HLF) are direct functional equivalents. These parts match the core parameters: 2.54mm pitch, 4-position, male pin, through-hole solder termination, and push-pull fastening. Operating temperature ranges of -55°C ~ 125°C (Molex C-Grid III) and -65°C ~ 125°C (Amphenol ICC BERGSTIK® II) encompass or exceed the Preci-Dip specification. All substitute parts maintain UL94 V-0 flammability rating and RoHS3 compliance.

Contact Finish Considerations:

Tin-plated contacts (0022284042, 0901200124) provide direct material equivalence to the Preci-Dip 890-80-004-10-001101. Gold-plated variants (0022284045, 0901200764, 0901200924, 68000-104HLF, 68000-204HLF, 68001-104HLF) offer enhanced corrosion resistance and are electrically compatible in the same circuit applications.

Amphenol ICC BERGSTIK® II Series:

The 68000 and 68001 series headers feature phosphor bronze contacts rated at 3A per contact, matching the Preci-Dip current specification. Operating temperature range extends to -65°C, providing additional thermal margin. RoHS compliance is confirmed; REACH status is affected for these parts.

Molex KK254 Series:

The 0022284042 and 0022284045 (KK254, 42375 series) are unshrouded, 4-position headers with breakaway capability. These parts support board-to-board or cable applications and maintain full compatibility with the Preci-Dip pitch and position count.

Molex C-Grid III Series:

The 0901200124, 0901200764, and 0901200924 (C-Grid III 90120 series) feature brass contacts with operating temperature range of -55°C ~ 125°C, directly matching the Preci-Dip specification. Polyester glass-filled insulation provides equivalent dielectric performance to polyamide.

Mill-Max 334 Series:

The 334-10-104-00-010000 is a 4-position header with extended gold-plated posts. This part differs in contact type (post vs. pin) and is suitable for applications requiring extended mating length. Compatibility depends on specific PCB layout and mating connector design.

Packaging and Inventory:

Molex 0022284045 offers the highest inventory availability (65548 units), followed by Molex 0901200924 (5783 units) and Molex 0901200124 (5696 units). Amphenol ICC 68000-204HLF provides 6894 units in stock. Selection should consider supply chain requirements and lead time constraints.

Frequently Asked Questions (FAQ)

Q1: Can I substitute the Preci-Dip 890-80-004-10-001101 with a Molex KK254 header?

A: Yes. The Molex 0022284042 and 0022284045 (KK254 series) are direct substitutes. Both match the 2.54mm pitch, 4-position configuration, through-hole solder termination, and push-pull fastening. The KK254 series supports board-to-board and cable applications. Verify PCB footprint compatibility before assembly.

Q2: What is the difference between tin and gold contact finishes in these headers?

A: Tin-plated contacts (Preci-Dip 890-80-004-10-001101, Molex 0022284042, Molex 0901200124) provide standard corrosion resistance for general-purpose applications. Gold-plated contacts (Molex 0022284045, 0901200764, 0901200924, Amphenol ICC 68000 and 68001 series) offer enhanced corrosion resistance and lower contact resistance, beneficial in high-reliability or harsh environments. Both finishes are electrically compatible in the same circuit.

Q3: Are Amphenol ICC BERGSTIK® II headers compatible with Preci-Dip 890-80-004-10-001101 applications?

A: Yes. The Amphenol ICC 68000-104HLF, 68000-204HLF, 68001-104HLF, and 68001-404HLF (BERGSTIK® II series) are functionally equivalent. All feature 2.54mm pitch, 4-position male pins, through-hole solder termination, and 3A current rating. Operating temperature range extends to -65°C, exceeding the Preci-Dip specification of -55°C ~ 125°C. Phosphor bronze contacts provide equivalent electrical performance to brass.

Q4: What is the significance of the Molex C-Grid III series kinked pin termination in part 0022285044?

A: The kinked pin termination in Molex 0022285044 provides mechanical retention during PCB assembly, reducing the risk of pin displacement during soldering. This variant is suitable for high-volume manufacturing or applications with vibration exposure. Electrical and mechanical compatibility with the Preci-Dip 890-80-004-10-001101 is maintained.

Q5: How do I verify PCB footprint compatibility when substituting headers?

A: Confirm that pitch (2.54mm), number of positions (4), and row configuration (single row) match the original design. Verify contact length and insulation height dimensions against PCB pad layout. The Preci-Dip 890-80-004-10-001101 specifies overall contact length of 0.458" (11.64mm) and insulation height of 0.100" (2.54mm). Substitute parts may vary slightly in these dimensions; consult detailed datasheets to ensure mechanical fit.

Q6: Are all listed substitute parts RoHS3 compliant?

A: Yes. All Molex and Mill-Max parts listed are ROHS3 compliant. Amphenol ICC BERGSTIK® II series (68000 and 68001) are RoHS compliant with REACH status affected. Verify compliance documentation for your specific application requirements.

Q7: What is the moisture sensitivity level (MSL) for these headers?

A: The Preci-Dip 890-80-004-10-001101 and all Molex substitute parts are rated MSL 1 (Unlimited), indicating no moisture sensitivity. The Mill-Max 334-10-104-00-010000 is rated MSL Not Applicable. Amphenol ICC BERGSTIK® II series are MSL 1 (Unlimited). These parts do not require special moisture control during storage or handling.

Q8: Can I use the Mill-Max 334-10-104-00-010000 as a direct replacement?

A: The Mill-Max 334-10-104-00-010000 is a 4-position header with extended gold-plated posts, not male pins. This part is suitable for applications requiring extended mating length or specific contact geometry. Verify mating connector compatibility and PCB layout before substitution, as contact type differs from the Preci-Dip original.

Q9: Which substitute offers the best availability?

A: The Molex 0022284045 (KK254 series) offers the highest inventory with 65548 units in stock. For tin-plated alternatives, Molex 0901200124 (C-Grid III series) provides 5696 units. Amphenol ICC 68000-204HLF offers 6894 units with gold plating. Selection should balance availability with specific application requirements.

Q10: What are the key parameters I must verify when selecting a substitute?

A: Verify the following parameters match or exceed the Preci-Dip 890-80-004-10-001101 specification: pitch (2.54mm), number of positions (4), connector type (header), contact type (male pin), mounting type (through hole), termination (solder), fastening type (push-pull), operating temperature range (-55°C ~ 125°C minimum), current rating (3A minimum), and flammability rating (UL94 V-0). Contact finish (tin or gold) and insulation material (polyamide, nylon, or polyester with glass fill) are secondary parameters that do not affect functional compatibility.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message