Keystone Electronics 8908 Tri-Lead LED Standoff Equivalent & Substitute Parts

Part Overview

The Keystone Electronics 8908 is a tri-lead LED standoff spacer mount manufactured from black PVC with a length of 0.260" (6.60mm). This component is designed to provide mechanical spacing and alignment for tri-lead LED assemblies in electronic applications. The part maintains Active product status and is RoHS3 compliant, making it suitable for current production environments. Equivalent parts may be required due to inventory availability, specific application length requirements, or supply chain considerations.

Substiute Parts

8908

Keystone ElectronicsIn Stock: 6818908 Datasheet

Current PartRFQ

8907

Keystone ElectronicsIn Stock: 23018907 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for tri-lead LED standoff spacers is determined by the following parameters:

• LED Type: Must be tri-lead configuration
• Material: Must be black PVC
• Manufacturer: Keystone Electronics
• RoHS Compliance: Must maintain ROHS3 compliance
• Product Status: Must be Active

The substitute part 8907 shares all critical parameters with the main part 8908 except for length. The 8907 features a 0.250" (6.35mm) length compared to the 8908's 0.260" (6.60mm). This dimensional difference of 0.010" (0.25mm) represents the only variation between these parts and must be evaluated against specific application requirements.

Parameter Comparison

Engineering Selection Recommendations

Both the 8908 and 8907 maintain Active product status and full RoHS3 compliance. Selection between these parts is determined by the mechanical spacing requirement in the application. The 8908 provides 0.260" (6.60mm) of standoff height, while the 8907 provides 0.250" (6.35mm). The 0.010" (0.25mm) difference must be verified against PCB layout, component clearance, and assembly specifications. Both parts are manufactured from identical material (black PVC) and support tri-lead LED configurations without functional or compliance restrictions.

Frequently Asked Questions (FAQ)

Q: Can the 8907 be used as a direct replacement for the 8908?

A: The 8907 is a parametric equivalent with one dimensional difference. It can be used only if the application tolerates a 0.010" (0.25mm) reduction in standoff height. Verify this dimension against your PCB layout and component clearance requirements before substitution.

Q: Are there any compliance differences between these parts?

A: No. Both parts maintain identical RoHS3 compliance, REACH Unaffected status, and Moisture Sensitivity Level 1 (Unlimited) ratings.

Q: What is the material composition of both parts?

A: Both the 8908 and 8907 are manufactured from black PVC and are suitable for tri-lead LED mounting applications.

Q: Are these parts available in other colors or materials?

A: The provided data specifies only black PVC variants. Consult the manufacturer for alternative material or color options outside this equivalency group.

Q: What is the significance of the tri-lead specification?

A: The tri-lead designation indicates these spacers are designed specifically for LED components with three leads. This configuration must be matched to your LED assembly type.

Q: Can these parts be used interchangeably in production?

A: Interchangeability depends on your application's tolerance for the 0.010" (0.25mm) length difference. Verify dimensional requirements in your assembly drawings before implementing either part in production.