Equivalent & Substitute Parts for Preci-Dip 890-70-004-10-001101

Part Overview

The Preci-Dip 890-70-004-10-001101 is a rectangular connector header designed for through-hole mounting applications. This unshrouded, 4-position male pin header operates at 0.100" (2.54mm) pitch and is rated for 3A current at 150VDC. The connector features gold-plated brass contacts with solder termination and is classified as Active product status with ROHS3 compliance. Substitute parts are identified to address inventory availability, packaging preferences, or specific application requirements while maintaining electrical and mechanical compatibility.

Key Parameters

Parameter	Specification
Connector Type	Header
Contact Type	Male Pin
Number of Positions	4
Pitch - Mating	0.100" (2.54mm)
Number of Rows	1
Mounting Type	Through Hole
Termination	Solder
Fastening Type	Push-Pull
Shrouding	Unshrouded
Contact Shape	Square
Contact Material	Brass
Insulation Material	Polyamide (PA), Nylon, Glass Filled
Operating Temperature	-55°C ~ 125°C
Current Rating	3A
Voltage Rating	150VDC
Material Flammability Rating	UL94 V-0
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level	1 (Unlimited)

Substitute Part Grouping Explanation

Substitute parts for the 890-70-004-10-001101 are qualified based on the following critical parameters that determine functional interchangeability:

Primary Matching Criteria:

4-position, single-row configuration
0.100" (2.54mm) mating pitch
Through-hole solder termination
Male pin contact type
Unshrouded header design
Push-pull fastening mechanism
Square contact geometry
UL94 V-0 flammability rating
ROHS3 compliance

Secondary Compatibility Factors:

Operating temperature range (-55°C to 125°C or equivalent)
Contact material composition (brass or phosphor bronze)
Insulation material (polyamide or polyester, glass-filled)
Current rating (3A or higher per contact)
Contact finish options (gold or tin plating)

Substitute parts are grouped into two categories: Direct Electrical Equivalents (Molex KK254 and C-Grid III series, Amphenol ICC BERGSTIK® II series) and Functional Alternatives (Mill-Max extended post header). All listed substitutes maintain the core 2.54mm pitch, 4-position, through-hole solder configuration required for board-level interconnection.

Parameter Comparison

Manufacturer Part Number	Manufacturer	Connector Type	Positions	Pitch (mm)	Contact Type	Mounting	Termination	Contact Finish - Mating	Operating Temp (°C)	Current Rating	Flammability	RoHS Status
890-70-004-10-001101	Preci-Dip	Header	4	2.54	Male Pin	Through Hole	Solder	Gold	-55 ~ 125	3A	UL94 V-0	ROHS3
0022284042	Molex	Header, Breakaway	4	2.54	Male Pin	Through Hole	Solder	Tin	Not Specified	Not Specified	UL94 V-0	ROHS3
0022284045	Molex	Header, Breakaway	4	2.54	Male Pin	Through Hole	Solder	Gold	Not Specified	Not Specified	UL94 V-0	ROHS3
0022285044	Molex	Header, Breakaway	4	2.54	Male Pin	Through Hole	Kinked Pin, Solder	Gold	Not Specified	Not Specified	UL94 V-0	ROHS3
0901200124	Molex	Header, Breakaway	4	2.54	Male Pin	Through Hole	Solder	Tin	-55 ~ 125	Not Specified	UL94 V-0	ROHS3
0901200764	Molex	Header, Breakaway	4	2.54	Male Pin	Through Hole	Solder	Gold	-55 ~ 125	Not Specified	UL94 V-0	ROHS3
0901200924	Molex	Header, Breakaway	4	2.54	Male Pin	Through Hole	Solder	Gold	-55 ~ 125	Not Specified	UL94 V-0	ROHS3
334-10-104-00-010000	Mill-Max Manufacturing Corp.	Header	4	2.54	Post, Extended	Through Hole	Solder	Gold	Not Specified	Not Specified	Not Specified	ROHS3
68000-104HLF	Amphenol ICC (FCI)	Header	4	2.54	Male Pin	Through Hole	Solder	Gold or Gold, GXT™	-65 ~ 125	3A per Contact	UL94 V-0	RoHS Compliant
68000-204HLF	Amphenol ICC (FCI)	Header	4	2.54	Male Pin	Through Hole	Solder	Gold or Gold, GXT™	-65 ~ 125	3A per Contact	UL94 V-0	RoHS Compliant
68000-404HLF	Amphenol ICC (FCI)	Header	4	2.54	Male Pin	Through Hole	Solder	Tin	-65 ~ 125	3A per Contact	UL94 V-0	RoHS Compliant

Engineering Selection Recommendations

Tier 1 - Preferred Substitutes (Highest Compatibility):

The Amphenol ICC BERGSTIK® II series (68000-104HLF, 68000-204HLF, 68000-404HLF) provides the closest functional equivalence to the 890-70-004-10-001101. These parts maintain identical 4-position, 2.54mm pitch, through-hole solder configuration with 3A current rating per contact. The 68000-104HLF and 68000-204HLF offer gold-plated mating contacts matching the original specification, while 68000-404HLF provides tin plating as an alternative. All three are UL94 V-0 rated and RoHS compliant. Operating temperature extends to -65°C, providing enhanced low-temperature performance compared to the original -55°C specification.

Tier 2 - Secondary Substitutes (Functional Equivalence):

The Molex C-Grid III series (0901200124, 0901200764, 0901200924) and KK254 series (0022284042, 0022284045, 0022285044) maintain the 4-position, 2.54mm pitch, through-hole solder termination. These parts are UL94 V-0 rated and ROHS3 compliant. The C-Grid III variants (0901200764, 0901200924) specify -55°C to 125°C operating temperature matching the original. Contact finish options include tin (0901200124, 0022284042) and gold (0901200764, 0901200924, 0022284045, 0022285044). The 0022285044 variant features kinked pin termination, which may require board layout verification for compatibility.

Tier 3 - Functional Alternative:

The Mill-Max 334-10-104-00-010000 is a 4-position header with extended gold-plated posts. While maintaining 2.54mm pitch and through-hole solder termination, this part features extended post geometry and is classified as a functional alternative rather than a direct equivalent. This option is suitable for applications requiring increased mating depth or specific mechanical clearance requirements.

Compliance Considerations:

All listed substitutes maintain ROHS3 or RoHS compliance status. The Amphenol ICC parts carry RoHS Compliant designation, while Molex and Preci-Dip parts are ROHS3 Compliant. All parts are classified as EAR99 for export control purposes and share identical HTSUS code 8536.69.4040. Moisture Sensitivity Level is 1 (Unlimited) for all parts except the Mill-Max variant (Not Applicable) and Molex 0901200764 (Not Applicable).

Frequently Asked Questions (FAQ)

Q: Can Molex KK254 series headers (0022284042, 0022284045, 0022285044) be used as direct replacements for the Preci-Dip 890-70-004-10-001101?

A: Yes, with design verification. All three Molex KK254 variants maintain the critical 4-position, 2.54mm pitch, through-hole solder configuration. However, contact length specifications differ: Molex parts feature 0.295" mating contact length versus 0.236" for the Preci-Dip original. Insulation height is 0.090" (Molex) compared to 0.100" (Preci-Dip). These dimensional differences may affect mating depth and board clearance. The 0022285044 variant includes kinked pin termination, requiring PCB hole pattern verification. Contact finish options (tin or gold) should be selected based on application requirements.

Q: What is the difference between the Molex C-Grid III variants (0901200124, 0901200764, 0901200924)?

A: All three C-Grid III parts share identical 4-position, 2.54mm pitch, through-hole solder configuration with -55°C to 125°C operating temperature. Primary differences are contact finish and packaging: 0901200124 features tin mating finish in bulk packaging; 0901200764 features gold mating finish in bulk packaging; 0901200924 features gold mating finish in tray packaging. Contact finish thickness varies: 0901200124 specifies 118.1µin (3.00µm) tin, while 0901200764 and 0901200924 specify 15.0µin (0.38µm) gold. Selection depends on contact finish preference and packaging requirements.

Q: How do Amphenol ICC BERGSTIK® II headers compare to the original Preci-Dip part?

A: The Amphenol ICC BERGSTIK® II series (68000-104HLF, 68000-204HLF, 68000-404HLF) provides the closest electrical and mechanical equivalence. All three maintain 4-position, 2.54mm pitch, through-hole solder termination with 3A current rating per contact. Operating temperature extends to -65°C (versus -55°C original), providing enhanced low-temperature capability. Contact length is 0.230" mating and 0.095" post, compared to 0.236" and 0.122" for the original. Insulation height is 0.100" (matching original). Contact material is phosphor bronze versus brass in the original. Contact finish options: 68000-104HLF and 68000-204HLF offer gold plating (30.0µin and 15.0µin respectively); 68000-404HLF offers tin plating (100.0µin). All are UL94 V-0 rated and RoHS compliant.

Q: Is the Mill-Max 334-10-104-00-010000 a suitable substitute?

A: The Mill-Max 334-10-104-00-010000 is a functional alternative rather than a direct equivalent. It maintains 4-position, 2.54mm pitch, through-hole solder termination with gold contact finish. However, this part is classified as a header with extended post geometry, which differs from the standard male pin configuration of the original. The extended post design is suitable for applications requiring increased mating depth or specific mechanical clearance. Compatibility requires verification of PCB hole pattern and mating connector specifications.

Q: What packaging options are available among the substitute parts?

A: Packaging varies across substitute options: Preci-Dip 890-70-004-10-001101 is supplied in bulk; Molex KK254 series (0022284042, 0022284045, 0022285044) are supplied in bulk; Molex C-Grid III 0901200124 and 0901200764 are supplied in bulk; Molex C-Grid III 0901200924 is supplied in tray; Amphenol ICC BERGSTIK® II series (68000-104HLF, 68000-204HLF, 68000-404HLF) are supplied in bag; Mill-Max 334-10-104-00-010000 is supplied in tube. Packaging selection should align with assembly process requirements and inventory management practices.

Q: Are there any contact finish compatibility considerations when selecting a substitute?

A: Contact finish selection depends on application requirements and mating connector specifications. Gold-plated contacts (Preci-Dip original, Molex 0901200764, 0901200924, 0022284045, 0022285044, Amphenol ICC 68000-104HLF, 68000-204HLF, Mill-Max 334-10-104-00-010000) provide superior corrosion resistance and are preferred for high-reliability applications. Tin-plated contacts (Molex 0901200124, 0022284042, Amphenol ICC 68000-404HLF) offer cost advantages and are suitable for standard industrial applications. Contact finish thickness varies: gold finishes range from 15.0µin to 30.0µin; tin finishes range from 100.0µin to 118.1µin. Verify mating connector contact material compatibility to ensure reliable electrical connection.

Q: What is the significance of the -55°C to 125°C operating temperature specification?

A: The -55°C to 125°C operating temperature range defines the thermal environment in which the connector maintains specified electrical and mechanical performance. This specification is critical for applications in automotive, aerospace, industrial, and telecommunications environments subject to temperature extremes. The Preci-Dip original and Molex C-Grid III series specify this range. Amphenol ICC BERGSTIK® II series extend the low-temperature limit to -65°C, providing enhanced performance in extreme cold environments. Molex KK254 series do not specify operating temperature in the provided data. Temperature rating should be verified against application requirements before final part selection.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message