89037-101 Equivalent & Substitute Parts

Part Overview

The 89037-101 is a 96-position backplane connector receptacle manufactured by Amphenol ICC (FCI) in the Metral® series. This high-speed board edge connector features female sockets with right-angle mounting and through-hole termination. The part is classified as obsolete, making identification of functionally equivalent alternatives essential for ongoing system support and component procurement.

Substiute Parts

89037-101

Amphenol ICC (FCI)In Stock: 113689037-101 Datasheet

Current PartRFQ

5536507-3

TE Connectivity AMP ConnectorsIn Stock: 15255536507-3 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 89037-101 is determined by strict alignment of the following critical parameters:

• Connector configuration: 96-position receptacle with female sockets
• Pitch specification: 0.079" (2.00mm) center-to-center spacing
• Physical arrangement: 4-row configuration
• Mounting interface: Board edge, through-hole, right-angle orientation
• Termination method: Solder attachment
• Contact material: Gold finish
• Flammability compliance: UL94 V-0 rating

The substitute part 5536507-3 (TE Connectivity AMP Connectors, Z-PACK series) satisfies all critical mechanical and electrical interface requirements, enabling direct functional replacement in applications where the 89037-101 is no longer available.

Parameter Comparison

Engineering Selection Recommendations

The 5536507-3 provides mechanical and electrical interface compatibility with the 89037-101 across all critical connector parameters: position count, pitch, row configuration, mounting orientation, and termination method. Both parts maintain UL94 V-0 flammability compliance and gold contact finish.

The substitute part offers advantages in product lifecycle status (active manufacturing versus obsolete) and regulatory compliance (ROHS3 compliant versus non-compliant). The extended operating temperature range of the 5536507-3 (-55°C ~ 125°C versus -55°C ~ 105°C) provides additional thermal margin.

The voltage rating differential (1000V for 89037-101 versus 30V for 5536507-3) must be evaluated against specific application requirements. Applications operating at voltages exceeding 30V require confirmation that the 5536507-3 meets system voltage specifications before implementation.

Frequently Asked Questions (FAQ)

Q: Can the 5536507-3 be used as a direct replacement for the 89037-101?

A: The 5536507-3 provides mechanical and electrical interface compatibility. Both connectors share identical position count (96), pitch (0.079"), row configuration (4), mounting type (board edge, through-hole, right-angle), and termination method (solder). Compatibility depends on application voltage requirements, as the 5536507-3 is rated for 30V maximum.

Q: What is the primary difference between these two parts?

A: The 89037-101 is an obsolete Metral® series connector rated for 1000V operation. The 5536507-3 is an active Z-PACK series connector rated for 30V operation. Both maintain identical mechanical interfaces and UL94 V-0 flammability compliance. The substitute offers ROHS3 compliance and extended temperature range (-55°C ~ 125°C).

Q: Are there packaging differences between these parts?

A: The 89037-101 packaging is not specified in available data. The 5536507-3 is supplied in tube packaging. Verify packaging requirements for your procurement and assembly processes.

Q: What should be verified before implementing the 5536507-3 as a substitute?

A: Confirm that application voltage requirements do not exceed 30V. Verify that the extended operating temperature range of the 5536507-3 (-55°C ~ 125°C) meets or exceeds system thermal specifications. Validate that tube packaging is compatible with your assembly workflow.

Q: Is the 5536507-3 suitable for new designs?

A: The 5536507-3 is actively manufactured and ROHS3 compliant, making it appropriate for new product development. Ensure voltage and temperature specifications align with application requirements.