Amphenol ICC 89036-102 Backplane Connector - Equivalent & Substitute Parts

Part Overview

The Amphenol ICC 89036-102 is a 48-position receptacle connector with female sockets, designed for board edge mounting in through-hole applications. This connector features a right-angle orientation, gold-plated contacts, and is rated for 1A current at up to 1000V. The part is classified as obsolete, making identification of suitable substitutes essential for ongoing system support and component procurement.

Substiute Parts

89036-102

Amphenol ICC (FCI)In Stock: 91589036-102 Datasheet

Current PartRFQ

89036-102LF

Amphenol ICC (FCI)In Stock: 260689036-102LF Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution for the 89036-102 is determined by strict equivalence across the following critical parameters:

• Connector Type & Configuration: Receptacle with female sockets, 48 positions, 4-row arrangement
• Electrical Specifications: 1A current rating, 1000V voltage rating
• Physical Interface: 0.079" (2.00mm) pitch, board edge mounting, through-hole, right-angle orientation
• Contact Properties: Gold plating at 30.0µin (0.76µm) thickness
• Environmental Ratings: Operating temperature range -55°C ~ 105°C, UL94 V-0 flammability rating

The substitute part 89036-102LF maintains identical electrical and mechanical specifications while offering active product status and improved regulatory compliance.

Parameter Comparison

Engineering Selection Recommendations

The 89036-102LF serves as the direct functional equivalent to the obsolete 89036-102. Both parts are manufactured by Amphenol ICC within the Metral® series and share identical electrical and mechanical specifications. The primary distinction lies in product lifecycle status and regulatory compliance.

The 89036-102LF is the active production variant and carries RoHS compliance certification, making it the appropriate selection for new designs and ongoing procurement. The original 89036-102, while still available in inventory, is classified as obsolete and does not meet current RoHS requirements.

For applications requiring the specific electrical performance (1A at 1000V), physical form factor (48-position, 4-row, 2.00mm pitch), and environmental ratings (-55°C ~ 105°C, UL94 V-0) of the 89036-102, the 89036-102LF provides full compatibility with the added benefit of active manufacturer support and regulatory alignment.

Frequently Asked Questions (FAQ)

Q: Can the 89036-102LF be used as a direct replacement for the 89036-102?

A: Yes. Both parts are identical in electrical specifications (1A, 1000V), mechanical configuration (48 positions, 4 rows, 2.00mm pitch), contact finish (gold, 30.0µin), and environmental ratings (-55°C ~ 105°C, UL94 V-0). The 89036-102LF is the active production equivalent.

Q: What is the difference between the 89036-102 and 89036-102LF?

A: The primary differences are product status and regulatory compliance. The 89036-102 is obsolete and RoHS non-compliant. The 89036-102LF is an active product with RoHS compliance and REACH applicability, making it suitable for current procurement and design requirements.

Q: Are there any packaging differences between these parts?

A: The 89036-102LF is supplied in bulk packaging, while the original 89036-102 packaging specification is not provided. Packaging differences do not affect electrical or mechanical compatibility.

Q: What are the critical parameters for substitution compatibility?

A: Substitution compatibility is determined by: connector type (receptacle, female sockets), position count (48), pitch (2.00mm), row configuration (4 rows), mounting method (board edge, through-hole, right-angle), termination type (solder), contact finish (gold), current rating (1A), voltage rating (1000V), and operating temperature range (-55°C ~ 105°C).

Q: Is the 89036-102LF suitable for applications requiring RoHS compliance?

A: Yes. The 89036-102LF carries RoHS compliance certification, making it appropriate for applications with RoHS requirements. The original 89036-102 does not meet RoHS standards.