Amphenol ICC 89035-301 Equivalent & Substitute Parts

Part Overview

The Amphenol ICC 89035-301 is a 24-position backplane connector receptacle designed for board edge, through-hole mounting in right-angle configuration. This female socket connector operates within the Metral® series and is classified as Active product status. The connector accommodates high-speed signal transmission applications requiring robust mechanical and electrical performance across industrial temperature ranges.

Substitute parts are identified to address inventory availability, compliance requirements, or specific application needs where equivalent electrical and mechanical parameters are maintained.

Substiute Parts

89035-301

Amphenol ICC (FCI)In Stock: 71089035-301 Datasheet

Current PartRFQ

5536507-1

TE Connectivity AMP ConnectorsIn Stock: 20535536507-1 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for backplane connectors is determined by strict alignment of core mechanical and electrical parameters. The following criteria establish substitution validity:

Primary Substitution Criteria:

• Connector type: Receptacle, Female Sockets (fixed requirement)
• Number of positions: 24 (fixed requirement)
• Pitch: 0.079" (2.00mm) (fixed requirement)
• Number of rows: 4 (fixed requirement)
• Mounting type: Board Edge, Through Hole, Right Angle (fixed requirement)
• Termination method: Solder (fixed requirement)
• Material flammability rating: UL94 V-0 (fixed requirement)

Secondary Compatibility Parameters:

• Operating temperature range: Substitute must support minimum -55°C to 105°C
• Voltage rating: Substitute must support minimum 1000V

The TE Connectivity AMP Connectors part 5536507-1 satisfies all primary substitution criteria and maintains compatibility across secondary parameters within acceptable engineering tolerances.

Parameter Comparison

Engineering Selection Recommendations

Selection between the Amphenol ICC 89035-301 and TE Connectivity 5536507-1 must be based on voltage rating requirements. The 89035-301 provides 1000V rating, while the 5536507-1 is rated for 30V operation. These parts are not interchangeable in applications requiring the full 1000V voltage specification.

The 5536507-1 is suitable only for applications operating at 30V or below. In such applications, the TE Connectivity part offers the advantage of ROHS3 compliance versus the non-compliant status of the Amphenol ICC part.

Both connectors maintain identical mechanical compatibility, identical pitch and position configuration, and equivalent thermal performance within their respective operating ranges.

Frequently Asked Questions (FAQ)

Q: Can the TE Connectivity 5536507-1 replace the Amphenol ICC 89035-301 in all applications?

A: No. While both connectors share identical mechanical specifications and mounting configuration, the voltage rating difference (1000V versus 30V) makes them incompatible for high-voltage applications. Substitution is valid only for applications operating at 30V or below.

Q: What are the critical parameters that must match for these connectors to be interchangeable?

A: The following parameters must match exactly: connector type (receptacle, female sockets), number of positions (24), pitch (0.079" / 2.00mm), number of rows (4), mounting type (board edge, through-hole, right-angle), termination method (solder), and flammability rating (UL94 V-0).

Q: Does the TE Connectivity part offer any advantages over the Amphenol ICC part?

A: The TE Connectivity 5536507-1 provides ROHS3 compliance and an extended operating temperature range (-55°C to 125°C versus -55°C to 105°C). However, these advantages apply only in applications where the 30V voltage rating is sufficient.

Q: What is the difference between the packaging formats listed?

A: The Amphenol ICC 89035-301 is supplied in Bulk packaging, while the TE Connectivity 5536507-1 is supplied in Tube packaging. Both formats contain the same connector specifications; packaging selection depends on assembly process requirements and inventory management practices.

Q: Are there any contact finish differences between these parts?

A: The Amphenol ICC 89035-301 does not specify contact finish information in the provided data. The TE Connectivity 5536507-1 specifies gold contact finish. Contact finish may affect long-term reliability in specific environmental conditions; consult application requirements for guidance.