Equivalent & Substitute Parts for 890334023025CS

Part Overview

The 890334023025CS is a 0.15 µF film capacitor manufactured by Würth Elektronik, designed for EMI and RFI suppression applications. This radial polypropylene (PP) metallized capacitor operates at 310V AC with a ±10% tolerance and is rated for X2 applications. The component is currently active in production with ROHS3 compliance and is suitable for through-hole mounting in industrial and consumer electronics.

Identifying equivalent and substitute parts is necessary when the primary part number becomes unavailable, when inventory constraints require alternative sourcing, or when design flexibility permits component standardization across multiple suppliers or product lines.

Substiute Parts

890334023025CS

Würth ElektronikIn Stock: 1912890334023025CS Datasheet

Current PartRFQ

890334023025

Würth ElektronikIn Stock: 1281890334023025 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution for the 890334023025CS is determined by strict equivalence across the following critical parameters:

• Capacitance value: 0.15 µF (exact match required)
• Tolerance: ±10% (defines acceptable capacitance range)
• Voltage rating: 310V AC (minimum voltage requirement for application safety)
• Dielectric type: Polypropylene (PP), Metallized (determines electrical characteristics and reliability)
• Mounting configuration: Through Hole, Radial (physical and mechanical compatibility)
• Lead spacing: 0.394" (10.00mm) (PCB layout compatibility)
• Temperature range: -40°C to 105°C (operational environment compatibility)
• Ratings classification: X2 (safety and regulatory compliance for AC applications)

The substitute part 890334023025 meets all these criteria and is therefore a direct parametric equivalent.

Parameter Comparison

Engineering Selection Recommendations

Both the 890334023025CS and 890334023025 are active products from Würth Elektronik within the WCAP-FTXX series. Both components maintain ROHS3 compliance and REACH unaffected status, meeting current regulatory requirements for industrial and consumer applications.

Selection between these parts should be based on inventory availability and procurement lead times. The substitute part 890334023025 is a direct equivalent with identical electrical specifications, mechanical dimensions, and compliance certifications. No functional or performance differences exist between the two part numbers.

Frequently Asked Questions (FAQ)

Q: Can 890334023025 be used as a direct replacement for 890334023025CS?

A: Yes. Both parts are parametrically identical across all critical specifications including capacitance, voltage rating, dielectric material, physical dimensions, lead spacing, and temperature range. They are interchangeable for all applications requiring a 0.15 µF, 310V AC film capacitor with X2 rating.

Q: Are there any differences in physical dimensions or mounting between these parts?

A: No. Both parts share identical dimensions (0.512" L x 0.276" W, 13.00mm x 7.00mm), maximum seated height (0.492" / 12.50mm), and lead spacing (0.394" / 10.00mm). PCB layout and mounting procedures are identical.

Q: Do both parts meet the same compliance standards?

A: Yes. Both 890334023025CS and 890334023025 are ROHS3 compliant and REACH unaffected. Both carry X2 ratings for AC applications and are suitable for EMI and RFI suppression circuits.

Q: What is the difference between the two part numbers?

A: The part numbers differ only in their suffix designation. The "CS" suffix on 890334023025CS indicates a specific packaging or distribution variant, while 890334023025 represents the base part number. Electrically and mechanically, they are equivalent.

Q: Can these capacitors be used in high-temperature environments?

A: Both parts operate within the temperature range of -40°C to 105°C. Applications requiring operation at the upper temperature limit should account for capacitance drift and ESR changes typical of polypropylene film capacitors at elevated temperatures.