Equivalent & Substitute Parts for 890324023002CS

Part Overview

The 890324023002CS is a 5600 pF film capacitor manufactured by Würth Elektronik, rated for 275V AC operation with polypropylene dielectric material. This radial through-hole component is designed for EMI and RFI suppression applications and carries ROHS3 compliance certification. Alternative equivalent parts may be required due to inventory availability, voltage rating requirements, or series preference in specific circuit designs.

Substiute Parts

890324023002CS

Würth ElektronikIn Stock: 2423890324023002CS Datasheet

Current PartRFQ

890324023002

Würth ElektronikIn Stock: 1302890324023002 Datasheet

Parametric EquivalentRFQ

890334023002

Würth ElektronikIn Stock: 948890334023002 Datasheet

Parametric EquivalentRFQ

890334023002CS

Würth ElektronikIn Stock: 1006890334023002CS Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 890324023002CS is determined by the following critical parameters: capacitance value (5600 pF), tolerance (±10%), dielectric material (polypropylene metallized), mounting type (through hole radial), physical dimensions (13.00mm x 5.00mm), lead spacing (10.00mm), and application rating (X2). The voltage rating may vary between equivalent parts while maintaining functional compatibility in circuits designed for lower voltage operation.

The substitute parts are grouped into two categories:

Category 1 - Direct Voltage Match (275V AC): Part 890324023002 shares identical electrical and mechanical specifications with the main part, differing only in packaging designation (bulk without "CS" suffix).

Category 2 - Higher Voltage Rating (310V AC): Parts 890334023002 and 890334023002CS operate at 310V AC, providing enhanced voltage margin while maintaining all other parameters. These parts belong to the WCAP-FTXX series rather than WCAP-FTX2.

Parameter Comparison

Engineering Selection Recommendations

All four parts maintain active product status and ROHS3 compliance, ensuring regulatory conformance for current designs. The 890324023002 provides direct substitution for the 890324023002CS with identical electrical performance and mechanical fit. The 890334023002 and 890334023002CS variants offer increased voltage headroom at 310V AC, suitable for applications requiring enhanced safety margin or operation in higher voltage environments while maintaining the same capacitance, tolerance, and physical footprint. Selection between 275V and 310V variants depends on circuit voltage requirements and design specifications.

Frequently Asked Questions (FAQ)

Q: Can 890334023002 or 890334023002CS replace 890324023002CS in any application?

A: Yes, the 310V rated parts are mechanically and electrically compatible substitutes. The higher voltage rating provides additional safety margin and can be used in circuits designed for 275V operation. However, circuit design specifications should be reviewed to confirm voltage rating requirements.

Q: What is the difference between 890324023002 and 890324023002CS?

A: Both parts are electrically and mechanically identical with matching 275V AC ratings, capacitance, tolerance, and physical dimensions. The designation difference reflects packaging or distribution channel variation only.

Q: Are the 890334023002 and 890334023002CS interchangeable?

A: Yes, these parts are functionally equivalent. Both carry 310V AC ratings and identical specifications except for packaging designation.

Q: Do all substitute parts fit the same PCB footprint?

A: Yes, all four parts share identical physical dimensions (13.00mm x 5.00mm) and lead spacing (10.00mm), ensuring direct PCB compatibility without layout modifications.

Q: Which substitute part should be selected for new designs?

A: Selection depends on circuit voltage requirements. For 275V applications, either 890324023002 or 890324023002CS is appropriate. For designs requiring higher voltage margin or operation above 275V, select 890334023002 or 890334023002CS.