Amphenol ICC 89007-120LF Equivalent & Substitute Parts

Part Overview

The Amphenol ICC 89007-120LF is a 60-position backplane connector header with male pins designed for through-hole PCB mounting. This connector is part of the Metral® series and is actively manufactured. The part features press-fit termination, gold-plated contacts, and is rated for operation across -55°C to 125°C. Finding equivalent substitute parts is necessary when the primary part is unavailable, when inventory constraints require alternative sourcing, or when design flexibility permits component standardization across multiple suppliers.

Substiute Parts

89007-120LF

Amphenol ICC (FCI)In Stock: 91189007-120LF Datasheet

Current PartRFQ

5223002-2

TE Connectivity AMP ConnectorsIn Stock: 8895223002-2 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 89007-120LF is determined by the following critical parameters:

• Position Count: 60 positions (exact match required)
• Pitch: 0.079" (2.00mm) (exact match required)
• Row Configuration: 5 rows (exact match required)
• Connector Type: Header with male pins (exact match required)
• Mounting Method: Through-hole PCB mounting (exact match required)
• Termination Style: Press-fit (exact match required)
• Contact Finish: Gold plating (exact match required)
• Operating Temperature Range: -55°C ~ 125°C (exact match or wider range acceptable)
• Flammability Rating: UL94 V-0 (exact match required)

The TE Connectivity AMP Connectors part 5223002-2 meets all critical substitution criteria. Both parts share identical position count, pitch, row configuration, connector type, mounting method, termination style, contact finish, operating temperature range, and flammability rating. The substitute part is manufactured to equivalent mechanical and electrical specifications within the allowed parameter tolerances for this connector category.

Parameter Comparison

Engineering Selection Recommendations

Both the 89007-120LF and 5223002-2 are active products with current manufacturing status. The primary part (89007-120LF) carries RoHS Compliant certification, while the substitute part (5223002-2) carries ROHS3 Compliant certification, indicating enhanced environmental compliance. Both parts meet UL94 V-0 flammability requirements and carry MSL 1 moisture sensitivity ratings, suitable for standard PCB assembly and storage conditions without special handling.

Selection between these parts should be based on supplier availability, lead time requirements, and inventory management objectives. Both parts are mechanically and electrically interchangeable within the specified parameter ranges for 60-position, 2.00mm pitch backplane connector applications.

Frequently Asked Questions (FAQ)

Q: Can the 5223002-2 be used as a direct replacement for the 89007-120LF?

A: Yes. Both parts share identical position count (60), pitch (0.079" / 2.00mm), row configuration (5), connector type (header with male pins), mounting method (through-hole), termination style (press-fit), contact finish (gold), operating temperature range (-55°C ~ 125°C), and flammability rating (UL94 V-0). The parts are mechanically and electrically compatible for PCB applications within these specifications.

Q: What are the key parameters that determine substitution eligibility?

A: Substitution eligibility is determined by exact matching of position count, pitch, row configuration, connector type, mounting method, termination style, contact finish, operating temperature range, and flammability rating. Deviation in any of these parameters disqualifies a part from substitution consideration.

Q: Are there differences in compliance certifications between these parts?

A: The primary part carries RoHS Compliant certification, while the substitute carries ROHS3 Compliant certification. ROHS3 represents an updated compliance standard. Both certifications satisfy environmental regulatory requirements for electronic components in applicable markets.

Q: What is the significance of the MSL 1 rating for both parts?

A: MSL 1 (Moisture Sensitivity Level 1) indicates unlimited shelf life without special moisture control measures. Both parts can be stored and handled using standard PCB assembly practices without requiring desiccant packaging or controlled humidity environments.

Q: Are there any packaging or inventory considerations when switching between these parts?

A: Both parts are supplied in tube packaging. Inventory levels differ (828 pcs for 89007-120LF and 823 pcs for 5223002-2), so substitution decisions may be influenced by current stock availability and procurement timelines.