Amphenol ICC 89006-548 Equivalent & Substitute Parts

Part Overview

The Amphenol ICC 89006-548 is a 30-position backplane connector header with male pins designed for through-hole mounting. This component belongs to the Metral® series and is classified as an active product with full inventory availability. The connector features press-fit termination, gold contact finish, and operates across an industrial temperature range of -55°C to 125°C with a current rating of 1A per contact.

Identifying equivalent and substitute parts becomes necessary when the primary part reaches end-of-life status, when supply constraints occur, or when design requirements call for alternative connector architectures that maintain electrical and mechanical compatibility within the same backplane connector category.

Substiute Parts

89006-548

Amphenol ICC (FCI)In Stock: 104489006-548 Datasheet

Current PartRFQ

5223011-1

TE Connectivity AMP ConnectorsIn Stock: 11425223011-1 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the Amphenol ICC 89006-548 is determined by strict alignment of the following critical parameters:

• Connector Category: Backplane Connectors
• Connector Type: Header, Male Pins
• Number of Positions: 30
• Pitch: 0.079" (2.00mm)
• Number of Rows: 5
• Mounting Type: Through Hole
• Termination Method: Press-Fit
• Operating Temperature Range: -55°C ~ 125°C
• Material Flammability Rating: UL94 V-0
• Contact Finish: Gold

The TE Connectivity AMP Connectors part number 5223011-1 qualifies as a manufacturer-recommended substitute. This part maintains electrical and mechanical compatibility through identical pitch, position count, row configuration, mounting method, and termination technology. Both connectors operate within the same temperature envelope and meet the same flammability standard. The substitute part is classified as ROHS3 compliant, representing an advancement in environmental compliance compared to the primary part.

Parameter Comparison

Engineering Selection Recommendations

Both the Amphenol ICC 89006-548 and TE Connectivity 5223011-1 maintain active product status and are available in current inventory. The primary distinction between these parts lies in regulatory compliance posture. The TE Connectivity 5223011-1 achieves ROHS3 compliance, making it the preferred selection for applications subject to European Union Restriction of Hazardous Substances directives or equivalent environmental regulations. The Amphenol ICC 89006-548 remains suitable for applications where RoHS compliance is not a design requirement.

Both connectors satisfy identical electrical and mechanical specifications, including current rating capacity, operating temperature range, flammability classification, and physical form factor. The connector style designation (Futurebus for the TE part) reflects architectural classification but does not alter fundamental substitution compatibility at the electrical interface level.

Frequently Asked Questions (FAQ)

Q: Can the TE Connectivity 5223011-1 be used as a direct replacement for the Amphenol ICC 89006-548?

A: Yes. Both connectors share identical pitch (0.079" / 2.00mm), position count (30), row configuration (5), mounting method (through-hole), termination technology (press-fit), and operating temperature range (-55°C to 125°C). The connectors are mechanically and electrically interchangeable at the interface level.

Q: What is the significance of the RoHS compliance difference?

A: The TE Connectivity 5223011-1 is ROHS3 compliant, indicating compliance with current European Union hazardous substances restrictions. The Amphenol ICC 89006-548 is RoHS non-compliant. Selection depends on whether your application or market jurisdiction requires RoHS certification.

Q: Are there differences in contact finish specifications?

A: The Amphenol ICC 89006-548 specifies gold or gold GXT™ finish with 50.0µin (1.27µm) thickness. The TE Connectivity 5223011-1 specifies gold finish without thickness specification provided. Both employ gold contact finish suitable for backplane connector applications.

Q: What is the difference between the Metral® and Z-PACK series designations?

A: These designations identify the product series within each manufacturer's connector portfolio. Series classification does not affect substitution compatibility when all electrical and mechanical parameters align.

Q: Are both parts available in current inventory?

A: Yes. The Amphenol ICC 89006-548 has 1002 pieces in stock, and the TE Connectivity 5223011-1 has 1104 pieces in stock, both listed as new original components.

Q: What is the current rating for these connectors?

A: The Amphenol ICC 89006-548 is rated at 1A per contact. The TE Connectivity 5223011-1 does not specify a current rating in the provided data.