Amphenol ICC 89006-144LF Equivalent & Substitute Parts

Part Overview

The Amphenol ICC 89006-144LF is a 30-position backplane connector header with male pins designed for through-hole PCB mounting. This connector is part of the Metral® series and is actively manufactured. The part operates across a wide temperature range of -55°C to 125°C with a current rating of 1A per contact. Finding equivalent or substitute parts may be necessary due to inventory constraints, supply chain considerations, or specific application requirements where alternative connector geometries or series designations are acceptable.

Substiute Parts

89006-144LF

Amphenol ICC (FCI)In Stock: 87689006-144LF Datasheet

Current PartRFQ

5223011-1

TE Connectivity AMP ConnectorsIn Stock: 11425223011-1 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

The TE Connectivity AMP Connectors part number 5223011-1 qualifies as a substitute for the Amphenol ICC 89006-144LF based on the following critical parameters:

• Number of Positions: Both parts feature 30 positions
• Pitch: Both maintain 0.079" (2.00mm) pitch spacing
• Number of Rows: Both are configured with 5 rows
• Connector Type: Both are Header, Male Pins
• Mounting Type: Both use Through Hole mounting
• Termination: Both employ Press-Fit termination
• Contact Finish: Both use Gold plating
• Operating Temperature Range: Both operate from -55°C to 125°C
• Material Flammability Rating: Both meet UL94 V-0
• Moisture Sensitivity Level: Both are MSL 1 (Unlimited)
• RoHS Compliance: Both are RoHS compliant (Amphenol RoHS Compliant; TE Connectivity ROHS3 Compliant)
• Packaging: Both are supplied in Tube packaging

The primary difference lies in the connector series designation (Metral® versus Z-PACK Futurebus) and specific voltage rating specification for the TE part (30V).

Parameter Comparison

Engineering Selection Recommendations

Both the Amphenol ICC 89006-144LF and TE Connectivity 5223011-1 are active products with equivalent electrical and mechanical specifications. Selection between these parts should be based on:

• Supply Availability: Current inventory shows 801 units of the Amphenol part and 1104 units of the TE Connectivity part
• Compliance Requirements: Both parts meet UL94 V-0 flammability standards and RoHS compliance requirements. The TE Connectivity part carries ROHS3 compliance designation
• Series Compatibility: The Metral® series (Amphenol) and Z-PACK Futurebus series (TE Connectivity) maintain identical mechanical and electrical interfaces for this 30-position, 2.00mm pitch configuration
• Temperature Performance: Both parts operate identically across the -55°C to 125°C range
• Packaging: Both are supplied in tube packaging, suitable for standard component handling and storage

The TE Connectivity 5223011-1 includes a specified voltage rating of 30V, whereas the Amphenol part does not specify this parameter. For applications requiring explicit voltage rating documentation, the TE Connectivity part provides this specification.

Frequently Asked Questions (FAQ)

Q: Can the TE Connectivity 5223011-1 directly replace the Amphenol ICC 89006-144LF?

A: Yes. Both parts share identical position count (30), pitch spacing (2.00mm), row configuration (5), connector type (Header, Male Pins), mounting method (Through Hole), and termination style (Press-Fit). The mechanical and electrical interfaces are equivalent.

Q: What is the difference between the Metral® and Z-PACK Futurebus series?

A: These are different connector series from different manufacturers. For this 30-position, 2.00mm pitch header configuration, both series provide equivalent mechanical and electrical performance. The series designation reflects the manufacturer's product line organization rather than functional differences in this application.

Q: Are there any temperature or compliance differences?

A: No. Both parts operate across -55°C to 125°C and meet UL94 V-0 flammability requirements. Both are RoHS compliant, with the TE Connectivity part specifically designated as ROHS3 compliant.

Q: Does the unspecified current rating on the TE Connectivity part affect substitution?

A: The TE Connectivity part does not specify a current rating in the provided data. The Amphenol part specifies 1A per contact. For applications requiring explicit current rating verification, contact the TE Connectivity technical documentation or supplier.

Q: What about the contact finish thickness difference?

A: The Amphenol part specifies 30.0µin (0.76µm) gold plating thickness. The TE Connectivity part does not specify this parameter. Both use gold contact finish. For applications with specific plating thickness requirements, verify TE Connectivity specifications directly.

Q: Are both parts suitable for high-reliability applications?

A: Both parts meet UL94 V-0 flammability standards and carry MSL 1 (Unlimited) moisture sensitivity ratings, indicating suitability for standard industrial and commercial applications. For high-reliability or military applications, consult detailed product specifications and qualification requirements.

Q: What packaging considerations apply to these parts?

A: Both parts are supplied in tube packaging. Standard tube quantities and handling procedures apply to both. Verify specific tube quantities with your supplier.