89006-115LF Equivalent & Substitute Parts

Part Overview

The 89006-115LF is a 30-position backplane connector header manufactured by Amphenol ICC (FCI) in the Metral® series. This through-hole, press-fit connector is designed for PCB applications requiring reliable male pin connections. The part is currently active in production with full inventory availability. Substitute parts may be required due to supply chain considerations, design standardization across product lines, or specific application requirements where alternative connector series offer equivalent electrical and mechanical performance.

Substiute Parts

89006-115LF

Amphenol ICC (FCI)In Stock: 114589006-115LF Datasheet

Current PartRFQ

5223011-1

TE Connectivity AMP ConnectorsIn Stock: 11425223011-1 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 89006-115LF is determined by the following critical parameters:

• Connector Type & Position Count: Must be Header, Male Pins with exactly 30 positions
• Pitch & Row Configuration: Must maintain 0.079" (2.00mm) pitch with 5-row arrangement for PCB footprint compatibility
• Mounting & Termination: Must use Through Hole mounting with Press-Fit termination for assembly process compatibility
• Contact Finish: Must feature gold plating for electrical performance and corrosion resistance
• Environmental Compliance: Must meet UL94 V-0 flammability rating and maintain -55°C ~ 125°C operating temperature range
• Regulatory Status: Must be RoHS compliant and MSL 1 rated

The substitute part 5223011-1 meets all critical substitution criteria within the backplane connector category.

Parameter Comparison

Engineering Selection Recommendations

Both the 89006-115LF and 5223011-1 are active production parts with full RoHS compliance and equivalent environmental ratings. The 89006-115LF is manufactured by Amphenol ICC in the Metral® series, while the 5223011-1 is manufactured by TE Connectivity in the Z-PACK series with Futurebus connector styling. Both parts satisfy identical electrical and mechanical requirements for 30-position backplane header applications with 2.00mm pitch and through-hole press-fit assembly.

Selection between these parts should be based on supply availability, existing design standardization within your product line, and connector series preference. Both parts carry equivalent certifications and environmental ratings suitable for industrial and commercial applications operating across the -55°C to 125°C temperature range.

Frequently Asked Questions (FAQ)

Q: Can 5223011-1 be used as a direct replacement for 89006-115LF in existing PCB designs?

A: Yes. Both connectors share identical pitch (2.00mm), position count (30), row configuration (5), and mounting method (through-hole press-fit). PCB footprints are compatible without modification.

Q: Are there differences in current rating between these parts?

A: The 89006-115LF specifies 1A current rating. The 5223011-1 does not specify a current rating in available documentation. Verify current requirements against your application specifications before selection.

Q: What is the difference between Metral® and Z-PACK series connectors?

A: These represent different connector series from their respective manufacturers. The 89006-115LF belongs to Amphenol ICC's Metral® series, while 5223011-1 belongs to TE Connectivity's Z-PACK series. Both series meet the same electrical and mechanical specifications for this 30-position header application.

Q: Are both parts RoHS compliant?

A: Yes. The 89006-115LF is RoHS Compliant. The 5223011-1 is ROHS3 Compliant. Both meet RoHS requirements for new designs.

Q: What is the moisture sensitivity level for these connectors?

A: Both parts are rated MSL 1 (Unlimited), indicating no moisture sensitivity restrictions for storage or handling.