Amphenol ICC 88874-110 Equivalent & Substitute Parts

Part Overview

The Amphenol ICC 88874-110 is a rectangular connector header, right-angle configuration, with 10 positions at 2.54mm pitch. This through-hole component features shrouded 4-wall design with solder termination and push-pull fastening. The part is classified as obsolete, making equivalent substitutes necessary for ongoing production and maintenance applications. Active alternatives from manufacturers including Molex, HARTING, and TE Connectivity provide functional equivalents with improved availability and compliance status.

Key Parameters

Parameter	Value
Connector Type	Header
Contact Type	Male Pin
Pitch - Mating	0.100" (2.54mm)
Number of Positions	10
Number of Rows	2
Row Spacing - Mating	0.100" (2.54mm)
Mounting Type	Through Hole, Right Angle
Shrouding	Shrouded - 4 Wall
Termination	Solder
Material Flammability Rating	UL94 V-0
Moisture Sensitivity Level (MSL)	1 (Unlimited)

Substitute Part Grouping Explanation

Substitution eligibility for the 88874-110 is determined by strict alignment with the following core parameters:

Pitch - Mating: 0.100" (2.54mm) — exact match required
Number of Positions: 10 — exact match required
Number of Rows: 2 — exact match required
Mounting Type: Through Hole, Right Angle — exact match required
Shrouding: Shrouded - 4 Wall — exact match required
Termination: Solder — exact match required
Material Flammability Rating: UL94 V-0 — minimum requirement

Substitute parts are grouped into two categories:

Category A: Direct 10-Position Right-Angle Equivalents Parts meeting all core parameters with identical position count and mounting orientation. These include Molex 0702471051, HARTING 09185105323, 09185106323, 09185107321, 09185107323, and TE Connectivity 1761682-3.

Category B: Non-Equivalent Parts The HARTING 09185145321 features 14 positions (not 10) and is therefore not a direct substitute. The HARTING 09195105902 uses vertical mounting (not right-angle) and is not compatible. The HARTING 09195106323 and 09195107323740 use different insulation materials (PCT vs. polyester) and are listed for reference only.

Parameter Comparison

Parameter	88874-110 (Main)	0702471051 (Molex)	09185105323 (HARTING)	09185106323 (HARTING)	09185107321 (HARTING)	09185107323 (HARTING)	1761682-3 (TE Connectivity)
Connector Type	Header	Header	Header	Header	Header	Header	Header
Contact Type	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin
Pitch - Mating	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)
Number of Positions	10	10	10	10	10	10	10
Number of Rows	2	2	2	2	2	2	2
Row Spacing - Mating	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)
Mounting Type	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle
Shrouding	Shrouded - 4 Wall	Shrouded - 4 Wall	Shrouded - 4 Wall	Shrouded - 4 Wall	Shrouded - 4 Wall	Shrouded - 4 Wall	Shrouded - 4 Wall
Termination	Solder	Solder	Solder	Solder	Solder	Solder	Solder
Fastening Type	Push-Pull	Push-Pull	Latch Holder	Latch Holder	Latch Holder	Latch Holder	Push-Pull
Contact Length - Mating	0.230" (5.84mm)	0.240" (6.10mm)	0.242" (6.15mm)	0.242" (6.15mm)	0.240" (6.10mm)	0.242" (6.15mm)	0.240" (6.10mm)
Contact Length - Post	0.105" (2.67mm)	0.120" (3.05mm)	0.114" (2.90mm)	0.114" (2.90mm)	0.177" (4.50mm)	0.114" (2.90mm)	0.114" (2.90mm)
Insulation Height	0.330" (8.38mm)	0.350" (8.89mm)	0.366" (9.30mm)	0.366" (9.30mm)	0.366" (9.30mm)	0.366" (9.30mm)	0.350" (8.89mm)
Contact Shape	Circular	Square	Square	Square	Square	Square	Square
Contact Finish - Mating	Gold, GXT™	Gold	Gold	Not specified	Gold	Gold	Gold
Contact Material	Phosphor Bronze	Phosphor Bronze	Copper Alloy	Copper Alloy	Copper Alloy	Copper Alloy	Phosphor Bronze
Insulation Material	Polyester, Glass Filled	Polybutylene Terephthalate (PBT), Glass Filled	Polybutylene Terephthalate (PBT), Glass Filled	Polybutylene Terephthalate (PBT), Glass Filled	Polybutylene Terephthalate (PBT), Glass Filled	Polybutylene Terephthalate (PBT), Glass Filled	Polycyclohexylenedimethylene Terephthalate (PCT)
Material Flammability Rating	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0
Operating Temperature	Not specified	Not specified	-55°C ~ 125°C	-55°C ~ 125°C	-55°C ~ 125°C	-55°C ~ 125°C	-65°C ~ 105°C
RoHS Status	RoHS non-compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant
Moisture Sensitivity Level (MSL)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)
Product Status	Obsolete	Active	Active	Active	Active	Active	Active

Engineering Selection Recommendations

Primary Recommendation: Molex 0702471051

The Molex 0702471051 is the preferred substitute for the obsolete Amphenol ICC 88874-110. This part maintains identical core specifications: 10-position, 2-row, 2.54mm pitch, right-angle through-hole mounting with shrouded 4-wall design and solder termination. The Molex part achieves ROHS3 compliance, addressing the non-compliance status of the original component. Contact material differs (phosphor bronze vs. copper alloy), but both materials meet UL94 V-0 flammability requirements. The part is in active production with 15,968 units in stock, ensuring supply continuity.

Secondary Recommendation: HARTING 09185107323

The HARTING 09185107323 provides an alternative with identical mechanical and electrical specifications to the 88874-110. This part features ROHS3 compliance, active product status, and extended operating temperature range (-55°C to 125°C). The latch holder fastening mechanism differs from the original push-pull design but maintains functional compatibility. Insulation material uses PBT glass-filled composition. Inventory availability is 2,013 units.

Tertiary Recommendation: TE Connectivity 1761682-3

The TE Connectivity 1761682-3 offers push-pull fastening identical to the original part, maintaining the same connector interface behavior. This part is ROHS3 compliant and active in production. Operating temperature range is -65°C to 105°C. Contact material is phosphor bronze, matching the original specification. Inventory availability is 2,178 units. Insulation material uses PCT composition instead of polyester.

Non-Equivalent Parts:

The HARTING 09185145321 (14 positions) is not a substitute due to position count mismatch. The HARTING 09195105902 (vertical mounting) is not compatible due to mounting orientation difference. Parts 09195106323 and 09195107323740 use different insulation materials and are not direct equivalents.

Frequently Asked Questions (FAQ)

Q: Can I use the HARTING 09185145321 as a substitute?

A: No. The 09185145321 has 14 positions, while the 88874-110 has 10 positions. Position count is a critical parameter that determines physical and electrical compatibility. This part is not interchangeable.

Q: What is the difference between push-pull and latch holder fastening?

A: Push-pull fastening (used in the original 88874-110 and Molex 0702471051) engages through axial motion. Latch holder fastening (used in HARTING alternatives) uses mechanical latches for retention. Both provide secure mating, but the interface mechanism differs. Connector compatibility depends on the mating receptacle design.

Q: Why do substitute parts have different contact materials?

A: The original part uses phosphor bronze contacts; some substitutes use copper alloy. Both materials meet the UL94 V-0 flammability requirement and provide adequate electrical conductivity for this application. Material selection reflects manufacturer design choices and does not affect functional compatibility in standard applications.

Q: Are all substitute parts RoHS compliant?

A: Yes. All recommended substitutes are ROHS3 compliant, addressing the non-compliance status of the obsolete 88874-110. This compliance is mandatory for new designs and many production environments.

Q: What is the significance of operating temperature range differences?

A: The original part does not specify an operating temperature range. Substitute parts provide defined ranges: HARTING parts operate -55°C to 125°C, TE Connectivity operates -65°C to 105°C, and Molex does not specify. These ranges indicate the tested thermal performance envelope. Selection should match your application requirements.

Q: Can I mix and match components from different manufacturers?

A: Mechanical and electrical compatibility depends on the mating receptacle design. If your existing receptacles are designed for the 88874-110 header, verify that substitute headers meet the same dimensional and contact specifications. Contact geometry (circular vs. square) and contact length variations may affect mating force and reliability.

Q: What packaging options are available?

A: Molex 0702471051 is supplied in bulk packaging. HARTING parts are available in bulk or tray packaging depending on part number. TE Connectivity 1761682-3 is supplied in bulk. Packaging selection affects handling and assembly processes but does not affect component function.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message