Amphenol ICC 88874-010 Equivalent & Substitute Parts

Part Overview

The Amphenol ICC 88874-010 is a shrouded right-angle rectangular connector header with 10 positions arranged in 2 rows at 0.100" (2.54mm) pitch. This through-hole, solder-terminated component is designed for board-to-board or cable interconnection applications. The part is Active in product status and RoHS Compliant, making it suitable for modern electronic assemblies requiring standard rectangular connector solutions.

Substitute parts are necessary when the primary part experiences supply constraints, when alternative packaging formats are required, or when design flexibility permits selection from qualified equivalent components that meet the same electrical and mechanical specifications.

Key Parameters

Parameter	Specification
Connector Type	Header
Contact Type	Male Pin
Number of Positions	10
Number of Rows	2
Pitch - Mating	0.100" (2.54mm)
Row Spacing - Mating	0.100" (2.54mm)
Mounting Type	Through Hole, Right Angle
Shrouding	Shrouded - 4 Wall
Termination	Solder
Material Flammability Rating	UL94 V-0
RoHS Status	RoHS Compliant
Moisture Sensitivity Level	1 (Unlimited)

Substitute Part Grouping Explanation

Substitution eligibility for the Amphenol ICC 88874-010 is determined by strict adherence to the following parameters:

Critical Parameters (Must Match Exactly):

Connector Type: Header
Contact Type: Male Pin
Number of Positions: 10
Number of Rows: 2
Pitch - Mating: 0.100" (2.54mm)
Row Spacing - Mating: 0.100" (2.54mm)
Mounting Type: Through Hole, Right Angle
Shrouding: Shrouded - 4 Wall
Termination: Solder
Material Flammability Rating: UL94 V-0
Moisture Sensitivity Level: 1 (Unlimited)

Allowable Variations:

Fastening Type: Push-Pull or Latch Holder
Packaging Format: Tray or Bulk
Contact Shape: Circular or Square
Insulation Material: Polyester Glass Filled, Polybutylene Terephthalate (PBT) Glass Filled, Polycyclohexylenedimethylene Terephthalate (PCT) Glass Filled, or Liquid Crystal Polymer (LCP)
Contact Finish specifications and thicknesses
Insulation Color
Operating Temperature range (when specified)
Contact Length variations within functional tolerance

All substitute parts listed maintain compatibility with the 88874-010 through these allowable parameter variations while preserving core electrical and mechanical function.

Parameter Comparison

Manufacturer Part Number	Manufacturer	Series	Connector Type	Positions	Pitch (mm)	Mounting	Shrouding	Fastening Type	Packaging	RoHS Status	Product Status
88874-010	Amphenol ICC (FCI)	Quickie™	Header	10 (2x5)	2.54	Through Hole, Right Angle	Shrouded - 4 Wall	Push-Pull	Tray	RoHS Compliant	Active
0702471051	Molex	C-Grid 70247	Header	10 (2x5)	2.54	Through Hole, Right Angle	Shrouded - 4 Wall	Push-Pull	Bulk	ROHS3 Compliant	Active
09185105323	HARTING	SEK	Header	10 (2x5)	2.54	Through Hole, Right Angle	Shrouded - 4 Wall	Latch Holder	Bulk	ROHS3 Compliant	Active
09185106321	HARTING	SEK	Header	10 (2x5)	2.54	Through Hole, Right Angle	Shrouded - 4 Wall	Latch Holder	Bulk	ROHS3 Compliant	Active
09185106323	HARTING	SEK	Header	10 (2x5)	2.54	Through Hole, Right Angle	Shrouded - 4 Wall	Latch Holder	Tray	ROHS3 Compliant	Active
09185107323	HARTING	SEK	Header	10 (2x5)	2.54	Through Hole, Right Angle	Shrouded - 4 Wall	Latch Holder	Tray	ROHS3 Compliant	Active
09195106323	HARTING	SEK	Header	10 (2x5)	2.54	Through Hole, Right Angle	Shrouded - 4 Wall	Latch Holder	Bulk	ROHS3 Compliant	Active
09195107323	HARTING	SEK	Header	10 (2x5)	2.54	Through Hole, Right Angle	Shrouded - 4 Wall	Latch Holder	Bulk	ROHS3 Compliant	Active
1761682-3	TE Connectivity AMP Connectors	AMP-Latch	Header	10 (2x5)	2.54	Through Hole, Right Angle	Shrouded - 4 Wall	Push-Pull	Bulk	ROHS3 Compliant	Active
2-1761605-3	TE Connectivity AMP Connectors	AMP-Latch	Header	10 (2x5)	2.54	Through Hole, Right Angle	Shrouded - 4 Wall	Push-Pull	Bulk	ROHS3 Compliant	Active
HTST-105-05-G-D-RA	Samtec Inc.	Flex Stack, HTST	Header	10 (2x5)	2.54	Through Hole, Right Angle	Shrouded - 4 Wall	Push-Pull	Tube	ROHS3 Compliant	Active

Engineering Selection Recommendations

All listed substitute parts maintain Active product status and meet or exceed RoHS compliance requirements. Selection among qualified substitutes should be based on the following engineering considerations:

Packaging Format Compatibility: The primary part 88874-010 is supplied in Tray packaging. Direct packaging equivalents in Tray format are available from HARTING (09185106323, 09185107323). Bulk and Tube packaging alternatives are available from Molex, HARTING, TE Connectivity, and Samtec for applications where packaging format flexibility is permitted.

Fastening Mechanism: The 88874-010 employs Push-Pull fastening. Substitute parts with Latch Holder fastening (HARTING SEK series) provide equivalent mechanical retention through alternative engagement methods. Push-Pull equivalents are available from Molex, TE Connectivity, and Samtec.

Insulation Material Composition: The primary part uses Polyester Glass Filled insulation. Substitutes employ Polybutylene Terephthalate (PBT) Glass Filled, Polycyclohexylenedimethylene Terephthalate (PCT) Glass Filled, or Liquid Crystal Polymer (LCP) materials. All materials meet UL94 V-0 flammability requirements and maintain MSL 1 (Unlimited) moisture sensitivity classification.

Operating Temperature Range: The 88874-010 does not specify an operating temperature range. Substitute parts from HARTING specify -55°C to 125°C, TE Connectivity specifies -65°C to 105°C, and Samtec specifies -55°C to 125°C. These ranges encompass typical industrial and commercial operating environments.

Current and Voltage Ratings: TE Connectivity parts (1761682-3, 2-1761605-3) provide specified electrical ratings of 1A per contact at 250VAC. Samtec HTST-105-05-G-D-RA provides 3.4A per contact rating. The primary part and other substitutes do not specify electrical ratings but maintain equivalent contact geometry and material composition.

Frequently Asked Questions (FAQ)

Q: Can I substitute the Amphenol ICC 88874-010 with any of the listed parts?

A: Yes, all listed parts are qualified substitutes. They maintain identical connector type, position count, pitch, mounting configuration, and shrouding specifications. Differences in fastening mechanism, packaging format, and insulation material do not affect functional compatibility when the mating connector is compatible with the substitute's fastening type.

Q: What is the difference between Push-Pull and Latch Holder fastening types?

A: Push-Pull fastening uses a sliding mechanism for engagement and disengagement. Latch Holder fastening uses a latching mechanism for retention. Both provide secure mechanical connection. Selection depends on application requirements for engagement force and disconnection method. Ensure the mating connector is compatible with the selected fastening type.

Q: Does packaging format affect electrical performance?

A: No. Tray, Bulk, and Tube packaging formats are logistics and handling variations only. They do not affect electrical or mechanical performance of the connector itself. Selection should be based on assembly process requirements and inventory management practices.

Q: Are all substitute parts RoHS compliant?

A: Yes. The primary part 88874-010 is RoHS Compliant. All listed substitute parts are ROHS3 Compliant, which represents current RoHS Directive compliance. This ensures compatibility with modern manufacturing and environmental regulations.

Q: What insulation materials are used in the substitute parts?

A: Substitute parts employ four insulation material options: Polyester Glass Filled (primary part), Polybutylene Terephthalate (PBT) Glass Filled, Polycyclohexylenedimethylene Terephthalate (PCT) Glass Filled, and Liquid Crystal Polymer (LCP). All materials meet UL94 V-0 flammability classification and maintain MSL 1 (Unlimited) moisture sensitivity.

Q: Which substitute offers the highest current rating?

A: The Samtec HTST-105-05-G-D-RA provides 3.4A per contact, the highest among all listed parts. TE Connectivity parts provide 1A per contact. The primary part and other substitutes do not specify current ratings.

Q: Can I mix fastening types in a single assembly?

A: No. Fastening type selection must be consistent with the mating connector design. Verify that your mating connector is compatible with either Push-Pull or Latch Holder engagement before selecting a substitute part.

Q: What is the moisture sensitivity level for all parts?

A: All parts, including the primary 88874-010 and all substitutes, maintain MSL 1 (Unlimited) classification. This indicates no moisture sensitivity restrictions and no special storage or handling requirements.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message