Equivalent & Substitute Parts for Qualtek 880-01/004

Part Overview

The Qualtek 880-01/004 is an AC power entry connector receptacle module designed for IEC 320-C14 panel mount applications. This filtered power entry module integrates EMI/RFI filtering with on-off switch functionality and fuse accommodation in a single unit. The part is currently active in production with 870 units in stock. Substitute parts are identified when equivalent electrical specifications, mechanical compatibility, and regulatory certifications align with the original design requirements.

Substiute Parts

880-01/004

QualtekIn Stock: 892880-01/004 Datasheet

Current PartRFQ

FN283-1-06

Schaffner EMC Inc.In Stock: 1219FN283-1-06 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

The Schaffner EMC Inc. FN283-1-06 qualifies as a substitute for the Qualtek 880-01/004 based on the following alignment of critical parameters:

Matching Electrical Characteristics:

• IEC 320-C14 connector style
• Receptacle, Male Blades - Module configuration
• 3-position connector
• Filtered (EMI, RFI) - Commercial filter type
• On-off switch functionality
• 1A current rating (Schaffner rated at filter level)
• Fuse accommodation capability

Matching Mechanical Characteristics:

• Panel Mount, Flange mounting type
• Quick Connect termination (Schaffner specifies 0.250" / 6.3mm)
• Panel cutout dimensions within tolerance (Qualtek: 29.50mm x 60.00mm; Schaffner: 29.00mm x 60.00mm)
• Fuse holder drawer configuration

Matching Regulatory Compliance:

• ROHS3 Compliant
• REACH Unaffected
• Multi-agency approvals (both include CSA and UL)

Parameter Comparison

Engineering Selection Recommendations

Both the Qualtek 880-01/004 and Schaffner FN283-1-06 maintain active product status with full regulatory compliance. Selection between these parts should be based on:

Availability and Lead Time: The Schaffner FN283-1-06 has higher inventory availability (1179 units) compared to the Qualtek part (870 units), which may influence procurement timelines.

Regulatory Scope: The Schaffner part carries additional approvals (CQC, ENEC) beyond the Qualtek certifications (CSA, UL, VDE), providing broader geographic compliance coverage if required by end-market specifications.

Mechanical Fit: Panel cutout dimensions differ by 0.5mm in width (Qualtek: 29.50mm; Schaffner: 29.00mm). Verify panel design tolerances to confirm mechanical compatibility in the target application.

Packaging: Qualtek ships in standard packaging; Schaffner is supplied in trays, which may affect handling and storage requirements.

Frequently Asked Questions (FAQ)

Q: Can the Schaffner FN283-1-06 directly replace the Qualtek 880-01/004 in existing designs?

A: The Schaffner part matches all critical electrical and mechanical parameters. However, the 0.5mm difference in panel cutout width (29.00mm vs. 29.50mm) requires verification against panel tolerance specifications. If the panel is designed with tight tolerances around the Qualtek dimension, mechanical fit must be confirmed before substitution.

Q: Are the current ratings equivalent between these parts?

A: Both parts are rated for 1A. The Qualtek specifies this at the appliance inlet level, while the Schaffner specifies it at the filter level. Both support the same operational current envelope for IEC 320-C14 applications.

Q: What is the significance of the panel cutout dimension difference?

A: The Schaffner cutout is 0.5mm narrower (29.00mm vs. 29.50mm). This is within typical manufacturing tolerances but must be evaluated against the panel design. If the panel was manufactured to accommodate the Qualtek dimension precisely, the Schaffner part may require panel modification or may not seat properly.

Q: Do both parts accommodate the same fuse types?

A: Both parts include fuse holder drawers and accommodate fuses, though specific fuse specifications are not provided in the technical data. Fuse compatibility should be confirmed through detailed mechanical drawings or manufacturer documentation.

Q: Are there differences in mounting flexibility?

A: The Schaffner part specifies "Front or Rear Side Mount" capability, while the Qualtek data does not detail this feature. This additional flexibility in the Schaffner part may be advantageous for certain panel configurations.

Q: Which part should be selected for new designs?

A: Selection depends on application requirements. For new designs, either part is acceptable based on electrical and regulatory compliance. Consider inventory availability, geographic compliance scope, and panel mechanical design when making the final selection.