Amphenol ICC 87901-424HLF Equivalent & Substitute Parts

Part Overview

The Amphenol ICC 87901-424HLF is a rectangular connector header from the BERGSTIK® II series, designed for board-to-board applications. This through-hole mounted component features 24 positions arranged in 2 rows with 0.100" (2.54mm) pitch spacing. The connector is actively manufactured and maintains full RoHS compliance with UL94 V-0 flammability rating. Substitute parts are identified when equivalent electrical and mechanical parameters align with the original specification, enabling component interchangeability in applications where the primary part becomes unavailable or when design requirements necessitate alternative sourcing.

Substiute Parts

87901-424HLF

Amphenol ICC (FCI)In Stock: 95387901-424HLF Datasheet

Current PartRFQ

ZW-12-11-L-D-660-080

Samtec Inc.In Stock: 907ZW-12-11-L-D-660-080 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

The Samtec Inc. ZW-12-11-L-D-660-080 qualifies as a substitute for the Amphenol ICC 87901-424HLF based on the following critical parameters:

• Position Count & Row Configuration: Both parts feature 24 positions in 2 rows
• Pitch Specification: Both maintain 0.100" (2.54mm) mating pitch and row spacing
• Mounting & Termination: Both are through-hole mounted with solder termination
• Electrical Ratings: Both support 5A current and 110V voltage requirements
• Compliance Status: Both are RoHS compliant and carry MSL 1 (Unlimited) moisture sensitivity rating
• Connector Class: Both are rectangular connectors suitable for board-to-board applications

Substitution is valid when the receiving circuit board design accommodates the physical dimensions and contact geometry of the alternative part.

Parameter Comparison

Engineering Selection Recommendations

Both the Amphenol ICC 87901-424HLF and Samtec Inc. ZW-12-11-L-D-660-080 maintain active product status with current manufacturing support. Selection between these parts should be based on:

Contact Finish Consideration: The Amphenol part features tin-plated contacts, while the Samtec substitute provides gold-plated contacts. Gold plating offers enhanced corrosion resistance and lower contact resistance, making it suitable for applications requiring extended shelf life or exposure to corrosive environments.

Compliance Alignment: Both parts satisfy RoHS requirements. The Samtec part carries ROHS3 designation, indicating compliance with the most current RoHS directive iteration.

Mechanical Compatibility: Physical dimensions, particularly overall contact length and stack height, must be verified against the receiving connector socket or mating component to ensure proper engagement and retention.

Frequently Asked Questions (FAQ)

Q: Can the Samtec ZW-12-11-L-D-660-080 directly replace the Amphenol ICC 87901-424HLF in existing designs?

A: Direct replacement is possible when the receiving connector socket accommodates the substitute part's physical dimensions. The critical compatibility factors are pitch (0.100"), position count (24), row configuration (2 rows), and row spacing (0.100"). Verify mating connector specifications before implementation.

Q: What is the significance of the contact finish difference between tin and gold plating?

A: Tin plating provides cost-effective corrosion protection suitable for standard applications. Gold plating delivers superior corrosion resistance, lower contact resistance, and extended shelf life, making it preferable for high-reliability or harsh environment applications.

Q: Are there packaging differences that affect component handling or storage?

A: The Amphenol part is supplied in bag packaging, while the Samtec substitute uses bulk packaging. Both maintain MSL 1 (Unlimited) moisture sensitivity, requiring standard dry storage conditions. Packaging format may influence inventory management and component dispensing procedures.

Q: Do both parts support the same electrical specifications?

A: Yes. Both parts are rated for 5A current and 110V voltage, with identical pitch and row spacing specifications. Electrical performance is equivalent for standard board-to-board interconnect applications.

Q: What compliance certifications apply to both parts?

A: Both parts are RoHS compliant and carry EAR99 ECCN classification. The Amphenol part includes UL94 V-0 flammability rating. Both maintain MSL 1 (Unlimited) moisture sensitivity level.