TE Connectivity AMP Connectors 87690-2 Equivalent & Substitute Parts

Part Overview

The TE Connectivity AMP Connectors 87690-2 is a rectangular connector header designed for through-hole mounting applications. This shrouded 12-position connector operates at 0.100" (2.54mm) pitch and features male pin contacts with gold-plated mating surfaces. The connector is classified as Active product status and is RoHS Compliant with REACH Unaffected designation. Substitute parts are identified when equivalent functional performance is required due to inventory constraints, design flexibility, or application-specific requirements while maintaining core electrical and mechanical compatibility.

Substiute Parts

87690-2

TE Connectivity AMP ConnectorsIn Stock: 97587690-2 Datasheet

Current PartRFQ

0901301112

MolexIn Stock: 37470901301112 Datasheet

SimilarRFQ

0901301212

MolexIn Stock: 55010901301212 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the TE Connectivity 87690-2 are qualified based on the following core parameters that determine functional interchangeability:

Critical Matching Parameters:

• Number of Positions: 12
• Number of Rows: 2
• Pitch - Mating: 0.100" (2.54mm)
• Row Spacing - Mating: 0.100" (2.54mm)
• Connector Type: Header
• Contact Type: Male Pin
• Mounting Type: Through Hole
• Shrouding: Shrouded - 4 Wall
• Termination: Solder
• Contact Shape: Square
• Insulation Color: Black

The identified substitute parts (Molex 0901301112 and Molex 0901301212) satisfy all critical matching parameters. Variations in contact finish material, contact finish thickness, insulation material composition, and fastening type do not prevent functional substitution when the above core parameters align. Both substitute parts maintain Active product status and comply with RoHS and REACH requirements.

Parameter Comparison

Engineering Selection Recommendations

All three connectors maintain Active product status and comply with RoHS and REACH regulatory requirements. The TE Connectivity 87690-2 features gold-plated contacts with phosphor bronze material and polyamide insulation. The Molex 0901301112 provides tin-plated contacts with brass material and polyester insulation. The Molex 0901301212 combines gold-plated mating contacts with brass material and polyester insulation.

Selection between these parts is determined by application requirements and compliance certifications. The Molex 0901301212 offers the closest contact finish specification to the primary part with gold plating on mating surfaces. Both Molex alternatives carry UL94 V-0 flammability ratings, providing enhanced material safety certification compared to the primary part specification. All three connectors are suitable for board-to-cable or board-to-board applications with identical pitch and position configurations.

Frequently Asked Questions (FAQ)

Q: Can Molex 0901301112 and Molex 0901301212 be used interchangeably with TE Connectivity 87690-2?

A: Both Molex parts satisfy the core functional parameters required for substitution: 12 positions, 2 rows, 0.100" (2.54mm) pitch, through-hole mounting, shrouded 4-wall design, and solder termination. Differences in contact finish material and thickness do not prevent functional compatibility in applications where the mating interface accepts these variations.

Q: What are the differences in contact finish between these three connectors?

A: The TE Connectivity 87690-2 features 30.0µin (0.76µm) gold plating on phosphor bronze contacts. The Molex 0901301112 provides 118.1µin (3.00µm) tin plating on brass contacts. The Molex 0901301212 combines 15.0µin (0.38µm) gold plating on mating surfaces with 118.1µin (3.00µm) tin plating on post surfaces, using brass contact material.

Q: Are there differences in insulation material between these connectors?

A: Yes. The TE Connectivity 87690-2 uses polyamide (PA) nylon with glass filler. Both Molex alternatives use polyester with glass filler. Both materials are glass-filled thermoplastics suitable for through-hole applications. The Molex parts carry UL94 V-0 flammability certification.

Q: What is the difference between Detent Lock and Latch Holder fastening types?

A: The TE Connectivity 87690-2 uses Detent Lock fastening, while both Molex alternatives use Latch Holder fastening. Both fastening mechanisms provide secure mating between header and connector receptacle. The specific fastening type must be compatible with the mating connector design.

Q: Do all three connectors have the same moisture sensitivity level?

A: Yes. All three connectors are classified as MSL 1 (Unlimited), indicating no moisture sensitivity restrictions for storage, handling, or assembly processes.

Q: Are all three connectors RoHS compliant?

A: Yes. The TE Connectivity 87690-2 is RoHS Compliant. Both Molex alternatives are ROHS3 Compliant. All three connectors are REACH Unaffected and carry EAR99 ECCN classification.