Amphenol ICC 87610-230 Rectangular Connector Header - Equivalent & Substitute Parts

Part Overview

The Amphenol ICC 87610-230 is a shrouded rectangular connector header designed for through-hole mounting applications. This component features a 30-position, 2-row configuration with 0.100" (2.54mm) pitch spacing, suitable for board-to-cable/wire connections. The part is classified as obsolete, making identification of active equivalent components essential for ongoing procurement and new design implementations.

Substiute Parts

87610-230

Amphenol ICC (FCI)In Stock: 87987610-230 Datasheet

Current PartRFQ

87610-230LF

Amphenol ICC (FCI)In Stock: 115687610-230LF Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 87610-230 is determined by strict equivalence across the following critical parameters:

• Connector type (Header)
• Contact type (Male Pin)
• Number of positions (30)
• Number of rows (2)
• Pitch spacing (0.100" / 2.54mm)
• Row spacing (0.100" / 2.54mm)
• Mounting method (Through Hole)
• Shrouding configuration (Shrouded - 4 Wall)
• Termination method (Solder)
• Contact material (Phosphor Bronze)
• Insulation material (Thermoplastic, Glass Filled)
• Flammability rating (UL94 V-0)

The 87610-230LF qualifies as a direct substitute based on complete alignment with all these parameters. The primary distinction is product status: the 87610-230 is obsolete, while the 87610-230LF is active and available in production quantities.

Parameter Comparison

Engineering Selection Recommendations

The 87610-230LF is the direct active equivalent for the obsolete 87610-230. Both components share identical electrical and mechanical specifications across all critical parameters. Selection between these parts should be based on the following factors:

For legacy system maintenance or repair requiring exact part matching, the 87610-230 remains available in limited inventory (778 units).

For new designs or ongoing procurement, the 87610-230LF is the appropriate choice. This part is active in production, available in higher inventory quantities (1111 units), and carries RoHS compliance certification. The 87610-230LF also includes tin finish on the post contact, providing enhanced solderability compared to the unspecified post finish of the original part.

Both components carry identical UL94 V-0 flammability ratings and are suitable for applications requiring thermoplastic, glass-filled insulation materials.

Frequently Asked Questions (FAQ)

Q: Are the 87610-230 and 87610-230LF mechanically interchangeable?

A: Yes. Both parts feature identical connector geometry, pitch spacing (0.100" / 2.54mm), row configuration (2 rows, 30 positions), shrouding design (4-wall), and mounting method (through-hole solder termination). They are direct mechanical equivalents.

Q: What is the difference between these two part numbers?

A: The primary differences are product status and compliance. The 87610-230 is obsolete and non-RoHS compliant. The 87610-230LF is an active production part with RoHS compliance. The 87610-230LF also specifies tin finish on the post contact (78.7µin / 2.00µm), whereas the original part does not specify post finish.

Q: Can I use the 87610-230LF as a replacement for the 87610-230 in existing designs?

A: Yes. The 87610-230LF is electrically and mechanically equivalent to the 87610-230. The RoHS compliance of the 87610-230LF makes it suitable for applications subject to RoHS regulations. The specified tin post finish on the 87610-230LF may provide improved soldering characteristics in manufacturing environments.

Q: What packaging options are available?

A: The 87610-230 is supplied in bulk packaging. The 87610-230LF is supplied in tube packaging, which provides better protection during storage and handling.

Q: Are there any electrical performance differences between these parts?

A: No. Both parts are constructed from phosphor bronze contact material with gold GXT™ mating finish (30.0µin / 0.76µm thickness). Electrical performance characteristics are identical.

Q: Which part should I specify for new designs?

A: Specify the 87610-230LF for new designs. This part is in active production, carries RoHS compliance, and is available in higher inventory quantities.