Amphenol ICC 87610-210 Equivalent & Substitute Parts

Part Overview

The Amphenol ICC 87610-210 is a shrouded vertical header connector with 10 positions at 2.54mm pitch, designed for through-hole board-to-cable/wire applications. This part is classified as obsolete, making equivalent and substitute parts necessary for ongoing production and maintenance applications. The connector features a 2-row configuration with male pins, gold-plated mating contacts, and phosphor bronze contact material, all housed in a thermoplastic glass-filled insulation body rated UL94 V-0.

Key Parameters

Parameter	Value
Connector Type	Header
Contact Type	Male Pin
Number of Positions	10
Number of Rows	2
Pitch - Mating	0.100" (2.54mm)
Row Spacing - Mating	0.100" (2.54mm)
Mounting Type	Through Hole
Shrouding	Shrouded - 4 Wall
Termination	Solder
Contact Shape	Square
Insulation Material	Thermoplastic, Glass Filled
Material Flammability Rating	UL94 V-0
Moisture Sensitivity Level	1 (Unlimited)

Substitute Part Grouping Explanation

Substitution for the 87610-210 is determined by strict equivalence across the following critical parameters: connector type (header), contact type (male pin), number of positions (10), number of rows (2), mating pitch (2.54mm), row spacing (2.54mm), mounting type (through hole), shrouding configuration (shrouded 4-wall), termination method (solder), contact shape (square), and flammability rating (UL94 V-0).

Substitute parts are grouped into two categories:

Category 1: Direct Amphenol ICC Substitutes The 87610-210LF is the direct successor to the 87610-210, maintaining identical mechanical and electrical specifications while offering active product status and RoHS compliance. This part differs only in packaging (tube vs. unspecified), insulation color (blue vs. black), and post contact finish (tin vs. unspecified).

Category 2: HARTING SEK Series Substitutes Parts 09185106322, 09185106324, 09185107322, 09185107324, 09195105324740, 09195106324, and 09195107324 from HARTING's SEK series provide mechanical and functional equivalence. These parts maintain the same connector type, position count, pitch, row spacing, mounting type, shrouding, termination, and flammability rating. Variations exist in contact length specifications, insulation material composition (PBT or PCT glass-filled), fastening type (latch holder vs. push-pull), and operating temperature range (-55°C to 125°C vs. unspecified).

Category 3: Assmann WSW Components Substitute The AWHW 10G-0202-T provides mechanical compatibility with identical position count, pitch, row spacing, mounting type, shrouding, and termination. This part operates at -40°C to 105°C and includes a 3A current rating specification not provided for the main part.

Parameter Comparison

Parameter	87610-210	87610-210LF	09185106322	09185106324	09185107322	09185107324	09195105324740	09195106324	09195107324	AWHW 10G-0202-T
Manufacturer	Amphenol ICC	Amphenol ICC	HARTING	HARTING	HARTING	HARTING	HARTING	HARTING	HARTING	Assmann WSW
Connector Type	Header	Header	Header	Header	Header	Header	Header	Header	Header	Header
Contact Type	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin
Number of Positions	10	10	10	10	10	10	10	10	10	10
Number of Rows	2	2	2	2	2	2	2	2	2	2
Pitch - Mating	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)
Row Spacing - Mating	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)
Mounting Type	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole
Shrouding	Shrouded - 4 Wall	Shrouded - 4 Wall	Shrouded - 4 Wall	Shrouded - 4 Wall	Shrouded - 4 Wall	Shrouded - 4 Wall	Shrouded - 4 Wall	Shrouded - 4 Wall	Shrouded - 4 Wall	Shrouded - 4 Wall
Termination	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder
Contact Shape	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square
Material Flammability Rating	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0
Product Status	Obsolete	Active	Active	Active	Active	Active	Active	Active	Active	Active
RoHS Status	RoHS non-compliant	RoHS Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant
Operating Temperature	Not specified	Not specified	-55°C ~ 125°C	-55°C ~ 125°C	-55°C ~ 125°C	-55°C ~ 125°C	-55°C ~ 125°C	-55°C ~ 125°C	-55°C ~ 125°C	-40°C ~ 105°C
Contact Length - Mating	0.236" (6.00mm)	0.236" (6.00mm)	0.240" (6.10mm)	0.240" (6.10mm)	0.240" (6.10mm)	0.240" (6.10mm)	0.240" (6.10mm)	0.240" (6.10mm)	0.240" (6.10mm)	0.224" (5.70mm)
Contact Length - Post	0.120" (3.05mm)	0.120" (3.05mm)	0.177" (4.50mm)	0.114" (2.90mm)	0.177" (4.50mm)	0.114" (2.90mm)	0.114" (2.90mm)	0.114" (2.90mm)	0.114" (2.90mm)	0.130" (3.30mm)
Insulation Height	0.377" (9.57mm)	0.377" (9.57mm)	0.350" (8.89mm)	0.350" (8.89mm)	0.350" (8.89mm)	0.350" (8.89mm)	0.350" (8.89mm)	0.350" (8.89mm)	0.350" (8.89mm)	0.354" (9.00mm)
Contact Material	Phosphor Bronze	Phosphor Bronze	Copper Alloy	Copper Alloy	Copper Alloy	Copper Alloy	Copper Alloy	Copper Alloy	Copper Alloy	Brass
Fastening Type	Push-Pull	Push-Pull	Latch Holder	Latch Holder	Latch Holder	Latch Holder	Latch Holder	Latch Holder	Latch Holder	Push-Pull

Engineering Selection Recommendations

For Direct Replacement (Preferred): The 87610-210LF is the recommended substitute for the obsolete 87610-210. Both parts are manufactured by Amphenol ICC and maintain identical mechanical and electrical specifications. The 87610-210LF offers active product status, RoHS compliance, and improved availability (1073 units in stock vs. 712 units for the original part). This part is suitable for new designs and production continuity.

For Alternative Sourcing: HARTING SEK series parts (09185106322, 09185106324, 09185107322, 09185107324, 09195105324740, 09195106324, 09195107324) provide functional equivalence with active product status and ROHS3 compliance. These parts feature expanded operating temperature ranges (-55°C to 125°C) and are available in higher quantities. Selection among these variants depends on specific contact length and insulation material requirements for your application.

For Extended Temperature Applications: The HARTING SEK series substitutes support operating temperatures from -55°C to 125°C, exceeding the unspecified range of the original part. These parts are suitable for industrial and automotive applications requiring wider temperature tolerance.

For Compliance-Driven Designs: All substitute parts listed are RoHS compliant (RoHS or ROHS3), addressing regulatory requirements that the original 87610-210 does not meet. The 87610-210LF and HARTING parts are suitable for applications subject to RoHS directives.

For High-Volume Applications: The 09185107324 (HARTING) offers the highest inventory availability (14,390 units in stock) and maintains all critical mechanical parameters. The AWHW 10G-0202-T (Assmann WSW) provides 7,212 units in stock with push-pull fastening matching the original part's design.

Frequently Asked Questions (FAQ)

Q: Can I use the 87610-210LF as a direct replacement for the 87610-210? A: Yes. The 87610-210LF maintains identical connector type, position count, pitch, row spacing, mounting type, shrouding, termination method, and contact shape. Both parts are manufactured by Amphenol ICC. The primary differences are packaging format, insulation color, and RoHS compliance status. The 87610-210LF is the active product successor.

Q: What are the key differences between Amphenol ICC and HARTING substitutes? A: Amphenol ICC 87610-210LF uses push-pull fastening and phosphor bronze contacts. HARTING SEK series parts use latch holder fastening and copper alloy contacts. Both maintain the same 2.54mm pitch, 10-position, 2-row configuration. HARTING parts specify operating temperature ranges (-55°C to 125°C) not provided for the Amphenol part.

Q: Are contact length variations between substitutes significant? A: Contact length variations exist across substitute parts. The original 87610-210 specifies 0.236" (6.00mm) mating contact length and 0.120" (3.05mm) post length. HARTING parts specify 0.240" (6.10mm) mating and either 0.177" (4.50mm) or 0.114" (2.90mm) post lengths. The Assmann part specifies 0.224" (5.70mm) mating and 0.130" (3.30mm) post length. These variations may affect board layout and mating connector compatibility.

Q: Which substitute offers the best availability? A: The HARTING 09185107324 offers the highest inventory (14,390 units in stock). The Assmann AWHW 10G-0202-T provides 7,212 units. The Amphenol 87610-210LF provides 1,073 units. Availability should be confirmed with your supplier for current stock levels.

Q: Do all substitutes meet RoHS requirements? A: The original 87610-210 is RoHS non-compliant. All listed substitutes are RoHS compliant (87610-210LF is RoHS Compliant; HARTING and Assmann parts are ROHS3 Compliant). For applications requiring RoHS compliance, any substitute part is suitable.

Q: What is the difference between push-pull and latch holder fastening? A: The original 87610-210 and Assmann AWHW 10G-0202-T use push-pull fastening. HARTING SEK series parts use latch holder fastening. Push-pull fastening provides quick-connect/disconnect capability. Latch holder fastening provides positive mechanical retention. Selection depends on your application's mating connector type and operational requirements.

Q: Can I mix substitute parts in the same design? A: All listed substitutes maintain the same 2.54mm pitch, 10-position, 2-row configuration and through-hole mounting. However, variations in contact length, insulation height, and fastening type may affect compatibility with specific mating connectors. Verify mating connector specifications before mixing substitute parts.

Q: Are there packaging considerations for high-volume production? A: The 87610-210LF is supplied in tube packaging. HARTING parts are supplied in tray or bulk packaging. The Assmann part is supplied in tray packaging. Packaging format affects handling, storage, and automated assembly processes. Confirm packaging requirements with your production and assembly teams.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message