TE Connectivity AMP Connectors 87587-6 Equivalent & Substitute Parts

Part Overview

The TE Connectivity AMP Connectors 87587-6 is a rectangular connector header designed for through-hole mounting applications. This connector features a vertical orientation with 20 positions arranged in 2 rows, utilizing a 0.100" (2.54mm) pitch standard. The component is classified as part of the AMPMODU Mod II series and is designated as obsolete in current product status.

Due to its obsolete classification, locating equivalent substitute parts is necessary for ongoing design support, maintenance, and production continuity. Active product alternatives within the same series provide functional equivalence while offering improved availability and compliance status.

Substiute Parts

87587-6

TE Connectivity AMP ConnectorsIn Stock: 85587587-6 Datasheet

Current PartRFQ

5-87587-6

TE Connectivity AMP ConnectorsIn Stock: 7345-87587-6 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the obsolete 87587-6 connector is based on strict electrical and mechanical parameter equivalence within the AMPMODU Mod II series. The substitute part 5-87587-6 maintains identical specifications across all critical functional parameters that determine connector compatibility:

Critical Substitution Parameters:

• Connector type, contact type, and gender (Header, Male Pin)
• Position count and row configuration (20 positions, 2 rows)
• Mating pitch and row spacing (0.100" / 2.54mm)
• Mounting method and termination type (Through Hole, Solder)
• Shrouding configuration (Shrouded - 4 Wall)
• Contact dimensions and geometry (Square shape, specified mating and post lengths)
• Contact material composition (Phosphor Bronze)
• Insulation material and flammability rating (Polyamide/Nylon Glass Filled, UL94 V-0)
• Operating temperature range (-65°C ~ 105°C)
• Current rating (3A)

The substitute part differs only in packaging format (Tray versus unspecified original packaging), contact finish composition (Tin versus Tin-Lead), and product status (Active versus Obsolete). These differences do not affect functional interchangeability in board-to-board or cable connection applications.

Parameter Comparison

Engineering Selection Recommendations

The substitute part 5-87587-6 is the direct functional equivalent for the obsolete 87587-6 connector. Selection of the substitute part is based on the following engineering criteria:

Product Status: The original 87587-6 is classified as obsolete, limiting availability for new production and ongoing support. The substitute 5-87587-6 maintains active product status, ensuring continued supply chain access and manufacturer support.

Regulatory Compliance: The substitute part 5-87587-6 is RoHS compliant, whereas the original part is RoHS non-compliant. This compliance improvement aligns with current regulatory requirements for electronic components in many jurisdictions and end-use applications.

Electrical and Mechanical Equivalence: All critical functional parameters are identical between the two parts. The connector maintains the same 20-position, 2-row configuration with 0.100" (2.54mm) pitch, through-hole solder termination, and 3A current rating. Operating temperature range, insulation material, flammability rating, and contact geometry are unchanged.

Contact Finish Consideration: The substitute part utilizes pure Tin contact finish instead of Tin-Lead. Both finishes meet the specified 100.0µin (2.54µm) thickness requirement and are functionally compatible for the intended board-to-board and cable connection applications within the specified operating temperature range.

Packaging: The substitute part is supplied in Tray packaging, which may differ from the original packaging format. This difference does not affect functional performance but may require adjustment to receiving and handling procedures.

Frequently Asked Questions (FAQ)

Q: Can the 5-87587-6 substitute directly replace the 87587-6 in existing designs?

A: Yes. The 5-87587-6 is functionally equivalent to the 87587-6 across all critical electrical and mechanical parameters. Both connectors feature identical position counts, pitch spacing, contact dimensions, operating temperature range, and current rating. Direct substitution is supported for board-to-board and cable connection applications.

Q: What is the difference between the Tin-Lead finish on the original part and the Tin finish on the substitute?

A: The original 87587-6 uses Tin-Lead contact finish, while the substitute 5-87587-6 uses pure Tin finish. Both finishes are applied to the same 100.0µin (2.54µm) thickness specification. The Tin finish on the substitute part reflects current manufacturing standards and RoHS compliance requirements. Both finishes provide equivalent electrical performance and corrosion resistance within the specified operating temperature range of -65°C to 105°C.

Q: Why is the original 87587-6 marked as obsolete?

A: The 87587-6 is classified as obsolete due to its Tin-Lead contact finish, which does not comply with RoHS regulations. The substitute 5-87587-6 addresses this compliance requirement while maintaining full functional equivalence. Obsolete status indicates that the original part is no longer in active production and may have limited availability.

Q: Are there any compatibility issues with the different packaging formats?

A: The original 87587-6 packaging format is not specified in the technical data. The substitute 5-87587-6 is supplied in Tray packaging. This packaging difference does not affect the connector's electrical or mechanical performance. Component handling, storage, and receiving procedures may require adjustment to accommodate the Tray format, but the connectors themselves are identical in function and performance.

Q: What is the current rating for both connectors?

A: Both the 87587-6 and 5-87587-6 are rated for 3A per contact. This current rating applies across the entire operating temperature range of -65°C to 105°C.

Q: Are both connectors suitable for high-temperature applications?

A: Yes. Both connectors are rated for operation from -65°C to 105°C. The insulation material (Polyamide/Nylon Glass Filled) and contact material (Phosphor Bronze) support this full temperature range. The UL94 V-0 flammability rating applies to both parts.

Q: What is the pitch spacing for these connectors?

A: Both connectors feature a 0.100" (2.54mm) mating pitch with 0.100" (2.54mm) row spacing. This standard pitch is compatible with industry-standard PCB layouts and mating connectors designed for 2.54mm spacing.

Q: Can these connectors be used for both board-to-board and cable connections?

A: Yes. Both the 87587-6 and 5-87587-6 are classified as Board to Board or Cable style connectors. The header configuration with male pins and solder termination supports both application types.