Amphenol ICC 87382-572H Equivalent & Substitute Parts

Part Overview

The Amphenol ICC 87382-572H is a rectangular connector header designed for through-hole board-to-board applications. This BERGSTIK® II series connector features 72 positions arranged in 2 rows with 0.100" (2.54mm) pitch spacing. The part is currently active in production with 684 units available in bulk packaging. Alternative components may be required due to inventory constraints, specific application requirements, or design revisions necessitating different mechanical or electrical characteristics.

Substiute Parts

87382-572H

Amphenol ICC (FCI)In Stock: 76487382-572H Datasheet

Current PartRFQ

BBD-136-T-C

Samtec Inc.In Stock: 933BBD-136-T-C Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 87382-572H is determined by strict alignment with the following core parameters:

• Connector Type: Must be Header
• Contact Type: Must be Male Pin
• Number of Positions: Must be 72
• Number of Rows: Must be 2
• Pitch - Mating: Must be 0.100" (2.54mm)
• Row Spacing - Mating: Must be 0.100" (2.54mm)
• Mounting Type: Must be Through Hole
• Termination: Must be Solder
• Style: Must be Board to Board
• Fastening Type: Must be Push-Pull
• Shrouding: Must be Unshrouded

The Samtec Inc. BBD-136-T-C meets all mandatory substitution criteria and is classified as a manufacturer-recommended equivalent for the 87382-572H.

Parameter Comparison

Engineering Selection Recommendations

Both the Amphenol ICC 87382-572H and Samtec Inc. BBD-136-T-C are active production components meeting identical functional and mechanical substitution criteria for 72-position, 2-row, 0.100" pitch through-hole header applications.

The Samtec BBD-136-T-C offers ROHS3 compliance, whereas the Amphenol part is RoHS non-compliant. Selection between these parts should be based on regulatory requirements specific to the end application and target market.

The BBD-136-T-C provides documented operating temperature range (-55°C ~ 125°C), while the 87382-572H does not specify this parameter in available documentation.

Physical differences exist in contact geometry, contact finish materials, and overall connector dimensions. These variations require verification against specific board layout, mating connector specifications, and mechanical clearance requirements in the target application.

Frequently Asked Questions (FAQ)

Q: Can the Samtec BBD-136-T-C directly replace the Amphenol ICC 87382-572H?

A: Both connectors meet the core substitution criteria: 72 positions, 2 rows, 0.100" (2.54mm) pitch, through-hole mounting, solder termination, and push-pull fastening. However, differences in contact length, insulation height, contact shape, and contact finish require verification against mating connector specifications and PCB layout constraints before implementation.

Q: What are the key differences between these two parts?

A: Primary differences include contact length (0.475" vs. 0.125" mating contact), overall connector height (0.675" vs. 0.835"), contact shape (square vs. circular), contact finish (gold vs. tin), and insulation material composition. The BBD-136-T-C also provides RoHS3 compliance and specified operating temperature range.

Q: Does packaging format affect substitution eligibility?

A: Packaging format (bulk vs. tube) does not affect electrical or mechanical compatibility. Selection should be based on procurement, handling, and assembly process requirements.

Q: Are there compliance considerations for substitution?

A: The Samtec BBD-136-T-C is ROHS3 compliant, while the Amphenol part is RoHS non-compliant. Applications subject to RoHS regulations must use the compliant alternative.

Q: What should be verified before implementing a substitute part?

A: Verify mating connector compatibility with the substitute's contact geometry and finish. Confirm PCB layout accommodates the different insulation height and overall connector dimensions. Validate operating temperature requirements against the substitute's specifications. Confirm regulatory compliance requirements are met.