TE Connectivity AMP Connectors 87233-6 Equivalent & Substitute Parts

Part Overview

The TE Connectivity AMP Connectors 87233-6 is a rectangular connector header designed for through-hole, right-angle mounting applications. This connector features a 6-position configuration with 0.100" (2.54mm) pitch spacing and is classified as an unshrouded, board-to-board or cable connector with solder termination. The part maintains Active product status and is RoHS Compliant with Moisture Sensitivity Level 1 (Unlimited). Substitute parts are identified when equivalent electrical and mechanical parameters align with the main part specifications, enabling direct component selection for applications requiring connector interchangeability.

Substiute Parts

87233-6

TE Connectivity AMP ConnectorsIn Stock: 82087233-6 Datasheet

Current PartRFQ

0901210126

MolexIn Stock: 185560901210126 Datasheet

SimilarRFQ

0901210766

MolexIn Stock: 166010901210766 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the TE Connectivity 87233-6 are identified based on alignment of critical electrical and mechanical parameters that determine functional compatibility. The substitution criteria include:

Primary Matching Parameters:

• Connector Type: Header configuration
• Contact Type: Male Pin
• Pitch - Mating: 0.100" (2.54mm)
• Number of Positions: 6
• Number of Rows: 1
• Mounting Type: Through Hole, Right Angle
• Termination: Solder
• Fastening Type: Push-Pull
• Shrouding: Unshrouded
• Contact Shape: Square
• Material Flammability Rating: UL94 V-0
• Insulation Color: Black
• Moisture Sensitivity Level: 1 (Unlimited)

The Molex C-Grid III 90121 series parts (0901210126 and 0901210766) satisfy these core parameters, enabling substitution in applications where the 87233-6 is specified. Variations in contact material, contact finish composition, and insulation material composition do not preclude substitution when the primary functional and mechanical parameters remain constant.

Parameter Comparison

Engineering Selection Recommendations

Both Molex substitute parts (0901210126 and 0901210766) maintain Active product status and satisfy the core mechanical and electrical parameters required for substitution with the TE Connectivity 87233-6. All three parts are UL94 V-0 rated and carry Moisture Sensitivity Level 1 (Unlimited) classification.

Molex 0901210126 is suitable for applications where tin-plated contact finishes are acceptable. This part carries ROHS3 Compliant status and REACH Unaffected designation.

Molex 0901210766 provides gold-plated mating contacts matching the TE Connectivity 87233-6 contact finish specification. This part also carries ROHS3 Compliant status and REACH Unaffected designation, offering closer alignment to the original part's contact finish characteristics.

The TE Connectivity 87233-6 carries REACH Affected status, while both Molex substitutes are REACH Unaffected. Component selection should account for regulatory compliance requirements specific to the application and end-use market.

Frequently Asked Questions (FAQ)

Q: What are the critical parameters that determine if a part can substitute for the TE Connectivity 87233-6?

A: The critical parameters are: 6-position header configuration, 0.100" (2.54mm) pitch spacing, male pin contact type, through-hole right-angle mounting, solder termination, push-pull fastening, unshrouded design, square contact shape, UL94 V-0 flammability rating, black insulation color, and Moisture Sensitivity Level 1 (Unlimited). Parts matching these parameters are functionally equivalent.

Q: Are there differences in contact material between the main part and substitutes?

A: Yes. The TE Connectivity 87233-6 uses phosphor bronze contacts, while both Molex substitutes use brass contacts. Both materials are suitable for the specified connector class and do not preclude substitution when other parameters align.

Q: What is the difference between Molex 0901210126 and 0901210766?

A: Both parts share identical mechanical specifications and mounting characteristics. The primary difference is contact finish: 0901210126 features tin-plated mating contacts, while 0901210766 features gold-plated mating contacts. The 0901210766 provides closer alignment to the TE Connectivity 87233-6 gold-plated contact specification.

Q: Do the contact length variations affect substitution compatibility?

A: Contact length variations exist between the main part and substitutes. The TE Connectivity 87233-6 has a mating contact length of 0.318" (8.08mm), while both Molex parts have 0.266" (6.75mm). These dimensional differences must be evaluated against specific application requirements, particularly in applications with tight tolerance constraints or specific mating depth requirements.

Q: What is the significance of REACH Affected versus REACH Unaffected status?

A: REACH Affected status indicates the part may contain substances subject to REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) regulations. The TE Connectivity 87233-6 carries REACH Affected status, while both Molex substitutes are REACH Unaffected. Applications subject to REACH compliance requirements should account for this regulatory distinction.

Q: Are all three parts RoHS compliant?

A: Yes. The TE Connectivity 87233-6 is RoHS Compliant, while both Molex substitutes are ROHS3 Compliant. Both designations indicate compliance with Restriction of Hazardous Substances requirements.

Q: Can the TE Connectivity 87233-6 be directly replaced with either Molex part in existing designs?

A: Direct replacement is possible when the application tolerates the specified dimensional and material variations. The contact length difference of 0.052" (1.33mm) between the TE part and Molex substitutes must be evaluated against mating connector specifications and PCB layout constraints. Mechanical fit verification is required before implementation.