TE Connectivity AMP Connectors 87233-5 Equivalent & Substitute Parts

Part Overview

The TE Connectivity AMP Connectors 87233-5 is an active rectangular connector header designed for through-hole, right-angle mounting applications. This unshrouded, 5-position connector operates within the AMPMODU Mod II series and features male pin contacts with 0.100" (2.54mm) pitch spacing. The connector is manufactured with phosphor bronze contacts finished in gold and is rated for 3A current operation across a temperature range of -65°C to 105°C. Substitute parts are identified to provide alternative sourcing options when the primary part becomes unavailable or when inventory requirements necessitate alternative component selection.

Substiute Parts

87233-5

TE Connectivity AMP ConnectorsIn Stock: 117487233-5 Datasheet

Current PartRFQ

0901210125

MolexIn Stock: 42580901210125 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the TE Connectivity 87233-5 are identified based on strict equivalence of core electrical and mechanical parameters. The substitution logic is based on the following critical parameters that must align across all equivalent parts:

Primary Matching Criteria:

• Connector Type: Header
• Number of Positions: 5
• Pitch - Mating: 0.100" (2.54mm)
• Mounting Type: Through Hole, Right Angle
• Contact Type: Male Pin
• Termination: Solder
• Fastening Type: Push-Pull
• Contact Shape: Square
• Shrouding: Unshrouded
• Number of Rows: 1
• Style: Board to Board or Cable
• Material Flammability Rating: UL94 V-0
• Insulation Color: Black
• Moisture Sensitivity Level: 1 (Unlimited)

The Molex 0901210125 connector meets all primary matching criteria and is classified as a direct substitute for the TE Connectivity 87233-5. Both connectors share identical pitch spacing, position count, mounting orientation, and termination method. Variations in contact material, contact finish, and specific dimensional tolerances are within acceptable ranges for rectangular connector substitution in this category.

Parameter Comparison

Engineering Selection Recommendations

Both the TE Connectivity 87233-5 and Molex 0901210125 connectors maintain active product status and comply with UL94 V-0 flammability requirements. The TE Connectivity part is not subject to RoHS requirements, while the Molex substitute is ROHS3 compliant. The Molex connector carries REACH Unaffected status, whereas the TE Connectivity part is REACH Affected.

Selection between these parts should be based on regulatory compliance requirements specific to the application. For applications requiring ROHS3 compliance and REACH Unaffected status, the Molex 0901210125 is the appropriate choice. For applications without these regulatory constraints, either connector is suitable based on availability and inventory considerations.

Both connectors share identical electrical and mechanical interface specifications, including pitch spacing, position count, mounting orientation, and termination method. The differences in contact material (phosphor bronze versus brass) and contact finish (gold versus tin) do not affect functional compatibility in standard board-to-board or cable connection applications.

Frequently Asked Questions (FAQ)

Q: Can the Molex 0901210125 be used as a direct replacement for the TE Connectivity 87233-5?

A: Yes. Both connectors share identical pitch spacing (0.100" / 2.54mm), position count (5), mounting type (through-hole right-angle), contact type (male pin), and termination method (solder). The connectors are mechanically and electrically compatible for board-to-board and cable connection applications.

Q: What are the differences between the TE Connectivity and Molex connectors?

A: The primary differences are contact material (phosphor bronze versus brass), contact finish (gold versus tin), insulation material (thermoplastic versus polyester glass-filled), and regulatory compliance status. The TE Connectivity part is not RoHS applicable and is REACH Affected. The Molex part is ROHS3 compliant and REACH Unaffected.

Q: Does the difference in contact finish affect performance?

A: Contact finish differences (gold versus tin) do not affect functional compatibility in standard applications. Both finishes provide adequate conductivity and corrosion resistance for push-pull connector applications operating within the specified temperature range.

Q: Are there any dimensional differences between these connectors?

A: Minor dimensional variations exist in contact length specifications. The TE Connectivity 87233-5 has a mating contact length of 0.318" (8.08mm), while the Molex 0901210125 has a mating contact length of 0.266" (6.75mm). These variations are within acceptable tolerances for rectangular connector substitution and do not affect mating compatibility.

Q: Which connector should be selected for RoHS-compliant applications?

A: The Molex 0901210125 is ROHS3 compliant and is the appropriate selection for applications requiring RoHS compliance. The TE Connectivity 87233-5 is not subject to RoHS requirements.

Q: What is the significance of the REACH status difference?

A: The Molex 0901210125 carries REACH Unaffected status, indicating it does not contain substances of very high concern (SVHC) listed under REACH regulations. The TE Connectivity 87233-5 is REACH Affected. For applications subject to REACH regulations, the Molex connector is the appropriate selection.

Q: Are both connectors rated for the same current?

A: The TE Connectivity 87233-5 is rated for 3A current. The Molex 0901210125 does not specify a current rating in the provided data. For applications requiring confirmed 3A current rating, the TE Connectivity part should be verified against application requirements.

Q: Can these connectors be used in automotive applications?

A: The Molex 0901210125 is specified for automotive and general purpose applications. The TE Connectivity 87233-5 does not specify automotive applications in the provided data. For automotive applications, the Molex connector is the appropriate selection.