TE Connectivity AMP Connectors 87232-5 Equivalent & Substitute Parts

Part Overview

The TE Connectivity AMP Connectors 87232-5 is an active rectangular connector header designed for through-hole, right-angle mounting applications. This unshrouded, 5-position connector operates within the AMPMODU Mod II series and is configured for board-to-board or cable interconnection with solder termination. The connector features male pins with gold-plated phosphor bronze contacts and is rated for 3A continuous current operation across an extended temperature range of -65°C to 105°C.

Substitute parts are identified to provide alternative sourcing options when the primary part becomes unavailable or when design requirements necessitate equivalent connector functionality with comparable electrical and mechanical specifications.

Substiute Parts

87232-5

TE Connectivity AMP ConnectorsIn Stock: 91487232-5 Datasheet

Current PartRFQ

0901210125

MolexIn Stock: 42580901210125 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for rectangular connector headers is determined by strict alignment of core electrical and mechanical parameters. The TE Connectivity 87232-5 and Molex 0901210125 are classified as equivalent substitutes based on the following critical parameters:

Matching Parameters:

• 5-position connector configuration
• 0.100" (2.54mm) mating pitch
• Through-hole, right-angle mounting orientation
• Solder termination method
• Push-pull fastening mechanism
• Unshrouded design
• Single-row layout
• Board-to-board or cable application profile
• UL94 V-0 flammability rating
• Male pin contact type
• Square contact geometry

Allowable Variations: Contact finish materials (gold versus tin), contact material composition (phosphor bronze versus brass), insulation material formulation (polyamide glass-filled versus polyester glass-filled), and contact length dimensions fall within acceptable substitution tolerances for this connector category. These variations do not compromise functional compatibility in standard board-level interconnection applications.

Parameter Comparison

Engineering Selection Recommendations

Both the TE Connectivity 87232-5 and Molex 0901210125 maintain active product status with full manufacturing support and availability. Selection between these equivalent parts is based on compliance certifications and sourcing requirements.

The TE Connectivity 87232-5 carries REACH Affected status, indicating compliance with European chemical substance regulations. The Molex 0901210125 is ROHS3 Compliant and REACH Unaffected, providing alternative compliance positioning for applications with specific regulatory requirements.

Both connectors achieve UL94 V-0 flammability certification and MSL 1 moisture sensitivity classification, supporting deployment in standard industrial and commercial environments without additional environmental controls.

The Molex 0901210125 offers higher inventory availability (4180 pieces) compared to the TE Connectivity part (868 pieces), providing supply chain flexibility for high-volume production requirements.

Frequently Asked Questions (FAQ)

Q: Can the Molex 0901210125 directly replace the TE Connectivity 87232-5 in existing designs?

A: Yes. Both connectors share identical mating pitch (0.100" / 2.54mm), position count (5), mounting orientation (through-hole right-angle), and termination method (solder). The connectors are mechanically and electrically interchangeable for board-level interconnection applications.

Q: What are the differences in contact materials between these two parts?

A: The TE Connectivity 87232-5 uses phosphor bronze contacts with gold plating (30.0µin thickness). The Molex 0901210125 uses brass contacts with tin plating (118.1µin thickness). Both material systems provide adequate electrical conductivity and contact reliability for standard signal and power distribution applications.

Q: Are there temperature rating differences between these connectors?

A: The TE Connectivity 87232-5 specifies an operating temperature range of -65°C to 105°C. The Molex 0901210125 does not provide an explicit operating temperature specification in the available data. For applications requiring confirmed temperature performance across the full -65°C to 105°C range, the TE Connectivity part provides documented specification.

Q: What is the significance of the "Breakaway" designation on the Molex connector?

A: The Molex 0901210125 features a breakaway design, allowing individual positions to be separated if required. The TE Connectivity 87232-5 does not include this feature. This difference does not affect substitution compatibility for standard fixed-position applications.

Q: How do the current ratings compare?

A: The TE Connectivity 87232-5 is rated for 3A continuous current. The Molex 0901210125 does not provide an explicit current rating specification. For applications requiring confirmed 3A current capacity, the TE Connectivity part provides documented electrical specification.

Q: Are there packaging or inventory considerations for these parts?

A: Both connectors are supplied in bulk packaging. The Molex 0901210125 maintains significantly higher inventory availability (4180 pieces) compared to the TE Connectivity 87232-5 (868 pieces), supporting rapid fulfillment for high-volume orders.

Q: What compliance certifications apply to each connector?

A: The TE Connectivity 87232-5 is REACH Affected and carries EAR99 export classification. The Molex 0901210125 is ROHS3 Compliant, REACH Unaffected, and carries EAR99 export classification. Both achieve UL94 V-0 flammability certification. Selection between parts should align with specific regulatory requirements for the target application and market.