Amphenol ICC 87180-688 Modular Connector - Equivalent & Substitute Parts

Part Overview

The Amphenol ICC 87180-688 is a Jack Modular Connector with 8p8c (RJ45, Ethernet) configuration, featuring 90° right-angle orientation and unshielded design. This connector is designed for through-hole solder termination applications with board lock functionality. The part is currently classified as obsolete, making identification of suitable substitute components essential for ongoing system support and new design implementations.

Substiute Parts

87180-688

Amphenol ICC (FCI)In Stock: 102087180-688 Datasheet

Current PartRFQ

87180-088LF

Amphenol ICC (FCI)In Stock: 318187180-088LF Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 87180-688 is determined by strict alignment with the following critical parameters:

• Connector Type & Configuration: Jack, 8p8c (RJ45, Ethernet)
• Physical Orientation: 90° right-angle mounting
• Termination Interface: Solder through-hole
• Shielding Classification: Unshielded
• Mechanical Features: Board lock, down-facing tab
• Environmental Ratings: Operating temperature -40°C ~ 70°C
• Contact System: Phosphor bronze with gold finish

The substitute part 87180-088LF meets all critical mechanical and electrical parameters required for functional equivalence. Both parts share the same base product number (87180) and connector family classification, confirming compatibility within the modular connector series.

Parameter Comparison

Engineering Selection Recommendations

The 87180-088LF is the designated manufacturer-recommended substitute for the obsolete 87180-688. Both connectors maintain identical mechanical and electrical interface specifications, ensuring direct functional compatibility in existing circuit board designs.

Key differentiation factors:

Product Status: The 87180-088LF carries active product status with established supply chain availability (3154 units in stock), whereas the 87180-688 is obsolete with limited remaining inventory (966 units).

Regulatory Compliance: The 87180-088LF achieves RoHS compliance and REACH affected status, meeting current environmental and regulatory requirements. The 87180-688 does not meet RoHS standards.

Contact Finish Specification: The 87180-088LF specifies a gold contact finish at 5.00µin thickness, compared to the 87180-688 GXT™ finish at 6.00µin. Both finishes provide equivalent corrosion resistance and electrical performance within the specified operating temperature range.

Packaging: The 87180-088LF is supplied in tube packaging, facilitating automated assembly processes and inventory management.

For new designs and ongoing production support, the 87180-088LF is the appropriate selection. For legacy system maintenance requiring exact original specifications, the 87180-688 remains available in limited quantities.

Frequently Asked Questions (FAQ)

Q: Can the 87180-088LF be used as a direct replacement for the 87180-688 in existing designs?

A: Yes. Both connectors share identical connector type, contact configuration (8p8c RJ45), orientation (90° right-angle), mounting method (through-hole solder), shielding classification (unshielded), and operating temperature range (-40°C ~ 70°C). The mechanical and electrical interfaces are fully compatible.

Q: What is the difference in contact finish between these two parts?

A: The 87180-688 features a GXT™ gold finish at 6.00µin thickness, while the 87180-088LF uses standard gold finish at 5.00µin thickness. Both finishes provide adequate corrosion protection and electrical conductivity for RJ45 Ethernet applications within the specified temperature range.

Q: Why is the 87180-088LF recommended over the 87180-688?

A: The 87180-088LF is an active product with established supply chain support and RoHS compliance certification. The 87180-688 is classified as obsolete with declining inventory. For new designs and long-term production, the 87180-088LF ensures regulatory compliance and supply continuity.

Q: Are there any packaging differences that affect assembly?

A: The 87180-088LF is supplied in tube packaging, which is standard for automated pick-and-place assembly operations. The 87180-688 packaging specification is not detailed. Tube packaging facilitates higher-volume manufacturing processes.

Q: Do both connectors support the same electrical ratings?

A: Both connectors are specified for 8p8c (RJ45, Ethernet) applications. The 87180-088LF includes Cat3 rating specification. Both maintain identical contact material (phosphor bronze) and operating temperature specifications (-40°C ~ 70°C).

Q: What is the inventory status for each part?

A: The 87180-688 has 966 units in stock (obsolete status). The 87180-088LF has 3154 units in stock (active status). For ongoing procurement, the 87180-088LF provides superior availability and supply chain reliability.