TE Connectivity AMP Connectors 87165-2 Equivalent & Substitute Parts

Part Overview

The TE Connectivity AMP Connectors 87165-2 is a socket contact connector designed for rectangular connector applications. This component is classified as a Socket Contact with Tin-Lead finish, rated for 22-26 AWG wire gauges, and utilizes crimp termination. The part is currently Active in product status with 1748 pieces available in inventory.

Identification of equivalent and substitute parts becomes necessary when addressing specific compliance requirements, managing supply chain constraints, or accommodating design revisions that require alternative contact finish specifications while maintaining functional compatibility within the AMPMODU series.

Substiute Parts

87165-2

TE Connectivity AMP ConnectorsIn Stock: 180687165-2 Datasheet

Current PartRFQ

5-87165-2

TE Connectivity AMP ConnectorsIn Stock: 8465-87165-2 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 87165-2 is determined by strict alignment with the following critical parameters:

Mandatory Matching Parameters:

• Socket contact type (Pin or Socket classification)
• Wire gauge range: 22-26 AWG
• Crimp termination method
• Contact finish thickness: 100.0µin (2.54µm)
• AMPMODU series designation
• Moisture Sensitivity Level: 1 (Unlimited)

Variable Parameters Permitting Substitution:

• Contact finish composition (Tin-Lead versus Tin)
• RoHS compliance status
• REACH vendor definition status

The substitute part 5-87165-2 maintains all mandatory parameters while differing in contact finish material (Tin instead of Tin-Lead) and compliance certifications (RoHS Compliant versus RoHS non-compliant).

Parameter Comparison

Engineering Selection Recommendations

87165-2 Selection Criteria: The 87165-2 is appropriate for applications where Tin-Lead contact finish is specified or required. This part maintains Active product status and is available in substantial inventory quantities. The RoHS non-compliant designation indicates this component is suitable for applications not subject to RoHS restrictions.

5-87165-2 Selection Criteria: The 5-87165-2 substitute provides RoHS Compliant certification, making it the appropriate selection for applications requiring adherence to RoHS directives and regulations. Both parts share identical wire gauge, termination method, contact finish thickness, and MSL ratings. The primary distinction is the contact finish material composition and compliance certification status.

Functional Compatibility: Both parts are functionally compatible within AMPMODU series connector assemblies when wire gauge and crimp termination requirements are met. Selection between these parts should be driven by specific compliance mandates and application regulatory requirements rather than electrical performance differences.

Frequently Asked Questions (FAQ)

Q: Can 5-87165-2 be used as a direct replacement for 87165-2?

A: The 5-87165-2 is functionally compatible with 87165-2 in applications where RoHS compliance is not a requirement. Both parts share identical socket contact type, wire gauge (22-26 AWG), crimp termination, contact finish thickness (100.0µin), and MSL rating. The primary difference is the contact finish material (Tin versus Tin-Lead) and RoHS compliance status.

Q: What is the significance of the contact finish difference between Tin-Lead and Tin?

A: The contact finish material is specified in the part number designation. The 87165-2 features Tin-Lead finish, while the 5-87165-2 features Tin finish. Both maintain the same 100.0µin (2.54µm) thickness specification. Selection between these finishes is determined by application requirements and regulatory compliance mandates.

Q: Are these parts interchangeable in AMPMODU series connectors?

A: Yes, both parts are interchangeable within AMPMODU series rectangular connectors when the socket contact type, 22-26 AWG wire gauge, and crimp termination requirements are met. The parts are designed for the same connector platform and maintain identical mechanical and electrical specifications except for contact finish material.

Q: What does RoHS Compliant status mean for part selection?

A: RoHS Compliant status indicates the part meets Restriction of Hazardous Substances directives. The 5-87165-2 carries RoHS Compliant certification, while the 87165-2 is RoHS non-compliant. Applications subject to RoHS regulations must use the 5-87165-2 variant.

Q: How does Moisture Sensitivity Level (MSL) affect part substitution?

A: Both parts carry MSL rating of 1 (Unlimited), indicating no moisture sensitivity restrictions for storage, handling, or use. This parameter is identical between the main part and substitute, confirming compatibility in this specification category.

Q: What inventory considerations exist between these parts?

A: The 87165-2 has 1748 pieces in stock, while the 5-87165-2 has 810 pieces available. Inventory levels may influence part selection when supply chain timing is a consideration, provided compliance and specification requirements are met.