Amphenol ICC 87036-136 Rectangular Connector - Equivalent & Substitute Parts

Part Overview

The Amphenol ICC 87036-136 is a through-hole rectangular connector header with 36 positions at 0.100" (2.54mm) pitch, designed for board-to-board applications. This connector is part of the BERGSTIK® II series and features unshrouded male pin contacts with press-fit and solder termination options. The part is currently active in production with 977 units in stock. Alternative components may be required due to supply constraints, design revisions, or specific application requirements for RoHS compliance or operating temperature specifications.

Substiute Parts

87036-136

Amphenol ICC (FCI)In Stock: 108387036-136 Datasheet

Current PartRFQ

TSW-136-17-T-S

Samtec Inc.In Stock: 1168TSW-136-17-T-S Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

The Samtec Inc. TSW-136-17-T-S qualifies as a direct substitute for the Amphenol ICC 87036-136 based on the following critical parameters:

• Connector Type & Contact Configuration: Both are unshrouded header connectors with male pin contacts
• Position Count & Pitch: Both feature 36 positions at 0.100" (2.54mm) mating pitch
• Mounting & Termination: Both use through-hole mounting with solder termination capability
• Physical Dimensions: Both share identical overall contact length (0.830" / 21.08mm) and insulation height (0.100" / 2.54mm)
• Contact Material & Shape: Both use phosphor bronze contacts with square geometry
• Flammability & MSL: Both meet UL94 V-0 and MSL 1 specifications
• Export Classification: Both carry EAR99 ECCN designation

The TSW-136-17-T-S provides functional equivalence for applications requiring the same electrical and mechanical interface characteristics.

Parameter Comparison

Engineering Selection Recommendations

The Samtec TSW-136-17-T-S serves as a functional equivalent for the Amphenol ICC 87036-136 in applications where the core electrical and mechanical interface requirements are met. Both connectors maintain identical pitch, position count, overall contact length, and flammability ratings.

Key considerations for component selection:

• RoHS Compliance: The TSW-136-17-T-S is ROHS3 compliant, while the 87036-136 is RoHS non-compliant. Applications subject to RoHS regulations should specify the Samtec part.
• Contact Finish: The 87036-136 features gold plating, while the TSW-136-17-T-S uses tin finish. Contact finish selection depends on application-specific corrosion resistance and signal integrity requirements.
• Operating Temperature: The TSW-136-17-T-S provides specified operating temperature range (-55°C ~ 105°C), whereas the 87036-136 does not specify this parameter.
• Application Flexibility: The TSW-136-17-T-S supports both board-to-board and cable applications, offering broader design flexibility compared to the board-to-board specification of the 87036-136.
• Product Status: Both parts are active in production with adequate inventory levels.

Frequently Asked Questions (FAQ)

Q: Can the Samtec TSW-136-17-T-S directly replace the Amphenol ICC 87036-136 in existing designs?

A: Yes, for applications where the core interface requirements are met. Both connectors share identical pitch (0.100" / 2.54mm), position count (36), overall contact length (0.830" / 21.08mm), and mounting type (through-hole). Verify that contact finish differences (gold vs. tin) and RoHS compliance status align with your application requirements.

Q: What is the significance of the contact finish difference between these parts?

A: The 87036-136 uses gold plating for enhanced corrosion resistance and signal integrity in high-reliability applications. The TSW-136-17-T-S uses tin finish, which is suitable for standard industrial applications. Contact finish selection should be based on environmental exposure, signal frequency, and reliability requirements.

Q: Does the operating temperature specification difference affect substitution?

A: The TSW-136-17-T-S provides a specified operating range of -55°C ~ 105°C. The 87036-136 does not specify operating temperature limits. If your application requires operation within defined temperature extremes, the TSW-136-17-T-S provides documented performance parameters. For standard room-temperature applications, this difference is not a limiting factor.

Q: Are there any mechanical compatibility concerns between these connectors?

A: No. Both connectors maintain identical mating pitch, contact geometry (square phosphor bronze), insulation height, and overall contact length. The minor differences in individual contact lengths (mating and post) do not affect mechanical compatibility or mating force characteristics.

Q: Which part should be selected for new designs?

A: Selection depends on specific design requirements. For RoHS-compliant applications, specify the TSW-136-17-T-S. For applications requiring gold-plated contacts or where the BERGSTIK® II series is specified, use the 87036-136. Both parts are active and available in production quantities.