TE Connectivity AMP Connectors 867052-1 Equivalent & Substitute Parts

Part Overview

The TE Connectivity AMP Connectors 867052-1 is a non-gendered rectangular connector contact designed for crimp termination with 20 AWG wire gauge. This component features tin-lead contact finish and operates within the AMPMODU series. The part is currently active in production with 3064 pieces available in new original inventory.

Identification of equivalent and substitute parts is necessary to support procurement flexibility, manage supply chain continuity, and accommodate specific compliance or operational requirements across different manufacturing environments.

Substiute Parts

867052-1

TE Connectivity AMP ConnectorsIn Stock: 3103867052-1 Datasheet

Current PartRFQ

5-867052-1

TE Connectivity AMP ConnectorsIn Stock: 38835-867052-1 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 867052-1 is determined by strict alignment across the following critical parameters:

Mandatory Matching Parameters:

• Wire Gauge: 20 AWG
• Contact Termination: Crimp
• Pin or Socket Configuration: Non-Gendered
• Contact Finish Thickness: 100.0µin (2.54µm)
• Series: AMPMODU
• Packaging: Cut Tape (CT)
• Moisture Sensitivity Level: 1 (Unlimited)

Allowable Variation:

• Contact Finish material composition (Tin-Lead versus Tin) is permitted as a substitution variable, provided all other parameters remain constant.

The substitute part 5-867052-1 meets all mandatory matching parameters and represents a direct functional equivalent with a modified contact finish specification.

Parameter Comparison

Engineering Selection Recommendations

867052-1 (Tin-Lead Contact Finish):

• RoHS non-compliant status applies to this part number
• Suitable for applications where RoHS compliance is not a requirement
• Tin-lead contact finish provides established performance characteristics in legacy systems

5-867052-1 (Tin Contact Finish):

• ROHS3 Compliant status applies to this part number
• REACH Unaffected classification indicates no regulatory restrictions under REACH
• Tin contact finish meets modern regulatory compliance requirements
• Recommended for new designs and applications requiring RoHS compliance

Both parts maintain identical electrical and mechanical specifications across wire gauge, crimp termination, contact geometry, and finish thickness. Selection between these parts is determined by regulatory compliance requirements and system-level design constraints rather than functional performance differences.

Frequently Asked Questions (FAQ)

Q: Can 5-867052-1 be used as a direct replacement for 867052-1?

A: Yes. Both parts share identical wire gauge (20 AWG), contact termination method (crimp), pin/socket configuration (non-gendered), contact finish thickness (100.0µin), series designation (AMPMODU), and packaging format (Cut Tape). The contact finish material differs (Tin versus Tin-Lead), which is an allowable substitution parameter for this product category.

Q: What is the primary difference between these two part numbers?

A: The primary difference is the contact finish material and associated regulatory compliance status. The 867052-1 features tin-lead finish and is RoHS non-compliant. The 5-867052-1 features tin finish and is ROHS3 compliant. Both finishes maintain the same thickness specification of 100.0µin (2.54µm).

Q: Are there any compatibility issues when substituting between these parts?

A: No compatibility issues exist. Both parts are non-gendered contacts within the AMPMODU series with identical crimp termination specifications and wire gauge ratings. They are mechanically and electrically interchangeable within the same connector assembly.

Q: Which part should be selected for new product designs?

A: The 5-867052-1 is appropriate for new designs requiring ROHS3 compliance and REACH compliance status. The 867052-1 remains suitable for applications where RoHS compliance is not mandated.

Q: What is the Moisture Sensitivity Level (MSL) for both parts?

A: Both parts carry MSL 1 (Unlimited), indicating no moisture sensitivity restrictions during storage, handling, or assembly processes.

Q: Are both parts available in the same packaging format?

A: Yes. Both parts are supplied in Cut Tape (CT) packaging format with substantial inventory availability (3064 pieces for 867052-1 and 3792 pieces for 5-867052-1).