Amphenol ICC 86453-530LF Rectangular Connector - Equivalent & Substitute Parts

Part Overview

The Amphenol ICC 86453-530LF is a through-hole, right-angle rectangular connector header with 30 positions at 2.00mm pitch, designed for board-to-board or cable applications. This part is classified as obsolete, making equivalent substitute parts necessary for ongoing production and maintenance applications. The connector features a 2-row configuration with unshrouded design, solder termination, and push-pull fastening. Active substitute options from Molex and Samtec provide functional equivalence while maintaining current product status and availability.

Substiute Parts

86453-530LF

Amphenol ICC (FCI)In Stock: 81386453-530LF Datasheet

Current PartRFQ

0877603017

MolexIn Stock: 7510877603017 Datasheet

MFR RecommendedRFQ

TMMH-115-01-F-D-RA

Samtec Inc.In Stock: 1221TMMH-115-01-F-D-RA Datasheet

MFR RecommendedRFQ

TMMH-115-01-T-D-RA

Samtec Inc.In Stock: 5202TMMH-115-01-T-D-RA Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 86453-530LF is determined by strict equivalence across the following critical parameters:

• Connector type: Header with male pin contacts
• Position count and row configuration: 30 positions in 2 rows
• Mating pitch and row spacing: 0.079" (2.00mm)
• Mounting style: Through-hole, right-angle orientation
• Termination method: Solder
• Fastening mechanism: Push-pull
• Contact material: Phosphor bronze
• Electrical ratings: Minimum 2A current and 200V voltage capability
• Flammability compliance: UL94 V-0

All three substitute parts meet these core criteria. Variations in contact finish thickness, insulation material composition, and post contact length represent acceptable engineering tolerances within the rectangular connector category and do not preclude functional substitution.

Parameter Comparison

Engineering Selection Recommendations

All three substitute parts are functionally equivalent to the 86453-530LF based on core electrical and mechanical parameters. Selection should prioritize active product status and compliance certifications:

The Molex 0877603017 (Milli-Grid 87760 series) is an active product with RoHS3 compliance and REACH unaffected status. This part maintains the same 2.00mm pitch, 30-position configuration, and push-pull fastening as the original. The insulation material differs (PCT versus polyamide), but both meet UL94 V-0 flammability requirements. Inventory availability is 700 units.

The Samtec TMMH-115-01-F-D-RA is an active, cuttable header variant with RoHS3 compliance and REACH unaffected status. This part features liquid crystal polymer insulation and an extended operating temperature range (-55°C to 125°C). The mating contact finish is gold with reduced thickness (3.00µin). Inventory availability is 1203 units.

The Samtec TMMH-115-01-T-D-RA is an active, cuttable header variant with RoHS3 compliance and REACH unaffected status. This part features liquid crystal polymer insulation, tin mating contact finish, and an operating temperature range of -55°C to 105°C. Material flammability rating is UL94 V-0. Inventory availability is 5149 units, the highest among all options.

Frequently Asked Questions (FAQ)

Q: Can the Molex 0877603017 directly replace the Amphenol ICC 86453-530LF?

A: Yes. Both connectors share identical pitch (2.00mm), position count (30), row configuration (2), mounting style (through-hole right-angle), and termination method (solder). The insulation material differs (PCT versus polyamide), but both meet UL94 V-0 flammability standards. Electrical ratings are equivalent for standard applications.

Q: What is the difference between the two Samtec TMMH variants?

A: The TMMH-115-01-F-D-RA features gold mating contact finish with 3.00µin thickness and operates to 125°C. The TMMH-115-01-T-D-RA features tin mating contact finish and operates to 105°C. Both are cuttable headers with liquid crystal polymer insulation. Selection depends on contact finish requirements and maximum operating temperature needs.

Q: Are the Samtec parts cuttable, and does this affect substitution?

A: Yes, both Samtec TMMH variants are cuttable headers. This feature allows field customization of position count if required. Cuttability does not prevent substitution for applications requiring the full 30-position configuration. The core electrical and mechanical parameters remain equivalent.

Q: What is the significance of the contact finish differences?

A: The original 86453-530LF uses gold mating finish (GXT™, 15.0µin thickness). The Molex 0877603017 uses gold (30.0µin thickness). The Samtec TMMH-115-01-F-D-RA uses gold (3.00µin thickness). The Samtec TMMH-115-01-T-D-RA uses tin. All finishes are acceptable for standard signal and low-power applications. Gold finishes provide superior corrosion resistance; tin finishes are cost-effective for non-corrosive environments.

Q: Do packaging differences affect substitution?

A: The original part packaging is not specified. Molex 0877603017 is supplied in trays; both Samtec variants are supplied in tubes. Packaging affects handling and storage but does not impact electrical or mechanical compatibility. Confirm packaging requirements with your procurement process.

Q: Are all substitute parts RoHS compliant?

A: The Molex 0877603017 and both Samtec variants are RoHS3 compliant and REACH unaffected. The original 86453-530LF RoHS status is not specified in the provided data. Confirm RoHS compliance requirements for your application before final selection.

Q: What is the operating temperature range for each part?

A: The original 86453-530LF operates from -40°C to 105°C. The Molex 0877603017 operating temperature is not specified. The Samtec TMMH-115-01-F-D-RA operates from -55°C to 125°C. The Samtec TMMH-115-01-T-D-RA operates from -55°C to 105°C. Verify your application's temperature requirements before selection.