Amphenol ICC 86453-130LF Rectangular Connector - Equivalent & Substitute Parts

Part Overview

The Amphenol ICC 86453-130LF is a through-hole, right-angle rectangular connector header with 30 positions arranged in 2 rows at 0.079" (2.00mm) pitch. This connector is classified as obsolete, making equivalent substitute parts necessary for ongoing design support, maintenance, and production continuity. The part features male pins with gold-plated mating contacts and tin-plated posts, designed for board-to-board or cable applications with push-pull fastening.

Substiute Parts

86453-130LF

Amphenol ICC (FCI)In Stock: 124386453-130LF Datasheet

Current PartRFQ

0877603017

MolexIn Stock: 7510877603017 Datasheet

MFR RecommendedRFQ

HTSW-115-22-S-D-RA

Samtec Inc.In Stock: 1209HTSW-115-22-S-D-RA Datasheet

MFR RecommendedRFQ

TMMH-115-01-F-D-RA

Samtec Inc.In Stock: 1221TMMH-115-01-F-D-RA Datasheet

MFR RecommendedRFQ

TMMH-115-01-T-D-RA

Samtec Inc.In Stock: 5202TMMH-115-01-T-D-RA Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 86453-130LF is determined by the following critical parameters:

• Pitch - Mating: 0.079" (2.00mm) — exact match required for mechanical and electrical compatibility
• Number of Positions: 30 — exact match required for circuit connectivity
• Number of Rows: 2 — exact match required for physical layout
• Row Spacing - Mating: 0.079" (2.00mm) — exact match required for mating interface
• Connector Type: Header — exact match required
• Contact Type: Male Pin — exact match required
• Mounting Type: Through Hole, Right Angle — exact match required
• Termination: Solder — exact match required
• Fastening Type: Push-Pull — exact match required
• Contact Material: Phosphor Bronze — functionally equivalent materials acceptable
• Insulation Material: Polyamide or equivalent polymeric materials acceptable
• Operating Temperature Range: Must encompass or exceed -40°C ~ 105°C
• Material Flammability Rating: UL94 V-0 or equivalent required
• Moisture Sensitivity Level: 1 (Unlimited) or equivalent required

Substitute parts are grouped into two categories:

Category A - Direct Pitch Match (2.00mm): Parts with identical 0.079" (2.00mm) pitch maintain full mechanical and electrical compatibility with existing PCB layouts and mating connectors.

Category B - Pitch Deviation (2.54mm): Parts with 0.100" (2.54mm) pitch represent a different connector family and are suitable only for new designs or applications where PCB redesign is feasible.

Parameter Comparison

Engineering Selection Recommendations

For Direct Replacement (Existing PCB Layouts):

The Molex 0877603017 (Milli-Grid 87760 series) is the primary substitute for the 86453-130LF. Both parts maintain identical pitch (0.079" / 2.00mm), row spacing, position count, and mounting configuration. The Molex part is active in production with ROHS3 compliance and UL94 V-0 flammability rating. Inventory availability is confirmed at 700 units.

The Samtec TMMH-115-01-F-D-RA and TMMH-115-01-T-D-RA are secondary substitutes within the same 2.00mm pitch family. Both are active production parts with ROHS3 compliance and extended operating temperature ranges (-55°C ~ 125°C and -55°C ~ 105°C respectively). The TMMH series features cuttable header design and LCP insulation material. Inventory availability is confirmed at 1203 and 5149 units respectively. The TMMH-115-01-T-D-RA variant uses tin mating contact finish instead of gold.

For New Designs (PCB Redesign Feasible):

The Samtec HTSW-115-22-S-D-RA represents a different connector family with 0.100" (2.54mm) pitch and row spacing. This part is suitable only for applications where PCB layout modification is acceptable. The HTSW series offers extended operating temperature range (-55°C ~ 125°C), LCP insulation, and ROHS3 compliance. Inventory availability is confirmed at 1116 units.

Compliance Considerations:

All substitute parts carry ROHS3 compliance certification. The 86453-130LF does not specify RoHS status. All substitute parts maintain UL94 V-0 flammability rating or equivalent, with the exception of TMMH-115-01-F-D-RA, which does not specify flammability rating.

Frequently Asked Questions (FAQ)

Q: Can the Molex 0877603017 be used as a direct replacement for the Amphenol ICC 86453-130LF?

A: Yes. Both parts share identical pitch (0.079" / 2.00mm), row spacing (0.079" / 2.00mm), position count (30), row count (2), mounting type (through-hole right-angle), and fastening mechanism (push-pull). The Molex part is active in production and maintains equivalent electrical and mechanical specifications.

Q: What is the difference between the two Samtec TMMH variants (TMMH-115-01-F-D-RA and TMMH-115-01-T-D-RA)?

A: Both TMMH variants maintain identical pitch, position count, and row configuration. The primary difference is mating contact finish: TMMH-115-01-F-D-RA uses gold-plated mating contacts (matching the original 86453-130LF), while TMMH-115-01-T-D-RA uses tin-plated mating contacts. Additionally, TMMH-115-01-T-D-RA has a lower post contact length (0.092" vs. 0.103") and operates to -55°C ~ 105°C compared to -55°C ~ 125°C for the F variant.

Q: Why is the Samtec HTSW-115-22-S-D-RA listed as a substitute if it has a different pitch?

A: The HTSW-115-22-S-D-RA is included as a substitute option for new design applications where PCB layout modification is feasible. The 0.100" (2.54mm) pitch represents a different connector family and is not compatible with existing PCBs designed for the 0.079" (2.00mm) pitch. This part is suitable only when redesign is acceptable.

Q: Are all substitute parts compatible with existing mating connectors designed for the 86453-130LF?

A: Compatibility depends on pitch matching. The Molex 0877603017 and both Samtec TMMH variants (0.079" / 2.00mm pitch) are compatible with existing mating connectors. The Samtec HTSW-115-22-S-D-RA (0.100" / 2.54mm pitch) is not compatible with existing 2.00mm pitch mating connectors and requires corresponding mating connector redesign.

Q: What packaging options are available for these substitute parts?

A: The Molex 0877603017 is supplied in Tray packaging. Both Samtec TMMH variants are supplied in Tube packaging. The Samtec HTSW-115-22-S-D-RA packaging is not specified in the provided data.

Q: Do all substitute parts meet the original operating temperature range of -40°C ~ 105°C?

A: The Molex 0877603017 does not specify operating temperature range. The Samtec TMMH-115-01-T-D-RA operates to -55°C ~ 105°C, which encompasses the original range. The Samtec TMMH-115-01-F-D-RA and HTSW-115-22-S-D-RA both operate to -55°C ~ 125°C, exceeding the original range.

Q: Are the substitute parts RoHS compliant?

A: All substitute parts carry ROHS3 compliance certification. The original 86453-130LF does not specify RoHS status.