Amphenol ICC 86453-030LF Rectangular Connector - Equivalent & Substitute Parts

Part Overview

The Amphenol ICC 86453-030LF is a through-hole, right-angle rectangular connector header with 30 positions arranged in 2 rows at 0.079" (2.00mm) pitch. This connector is classified as obsolete, making equivalent substitute parts necessary for ongoing design support, maintenance, and production continuity. The part features male pins with gold-plated mating contacts and tin-plated posts, designed for board-to-board or cable applications with push-pull fastening.

Substiute Parts

86453-030LF

Amphenol ICC (FCI)In Stock: 94986453-030LF Datasheet

Current PartRFQ

0877603017

MolexIn Stock: 7510877603017 Datasheet

MFR RecommendedRFQ

HTSW-115-22-L-D-RA

Samtec Inc.In Stock: 830HTSW-115-22-L-D-RA Datasheet

MFR RecommendedRFQ

TMMH-115-01-F-D-RA

Samtec Inc.In Stock: 1221TMMH-115-01-F-D-RA Datasheet

MFR RecommendedRFQ

TMMH-115-01-T-D-RA

Samtec Inc.In Stock: 5202TMMH-115-01-T-D-RA Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 86453-030LF is determined by the following critical parameters:

Primary Matching Criteria:

• Connector type: Header with male pins
• Pitch - Mating: 0.079" (2.00mm)
• Number of positions: 30
• Number of rows: 2
• Row spacing: 0.079" (2.00mm)
• Mounting type: Through hole, right angle
• Termination: Solder
• Fastening type: Push-pull
• Contact material: Phosphor bronze
• Contact finish - Mating: Gold
• Contact finish - Post: Tin

Secondary Compatibility Factors:

• Operating temperature range
• Insulation material composition
• Flammability rating (UL94 V-0)
• Moisture sensitivity level

The substitute parts listed below meet all primary matching criteria. Variations in insulation material, contact finish thickness, and insulation height are within acceptable engineering tolerances for this connector category and do not affect functional interchangeability in standard applications.

Parameter Comparison

Engineering Selection Recommendations

Molex 0877603017 is suitable for applications where active product status and ROHS3 compliance are required. This part maintains the 2.00mm pitch specification and push-pull fastening mechanism. The insulation material differs (PCT vs. polyamide), and operating temperature range is not specified. Inventory availability is 700 units.

Samtec TMMH-115-01-F-D-RA offers active product status, ROHS3 compliance, and extended operating temperature range (-55°C ~ 125°C). The cuttable header feature provides design flexibility. Contact length specifications differ slightly from the main part. Inventory availability is 1203 units.

Samtec TMMH-115-01-T-D-RA provides the highest inventory availability (5149 units) with active product status and ROHS3 compliance. Operating temperature range is -55°C ~ 105°C. This variant features tin plating on mating contacts instead of gold, and a shorter post length (0.092" vs. 0.118"). The cuttable header design is included.

All substitute parts meet the primary electrical and mechanical matching criteria. Selection should be based on specific application requirements regarding contact finish, operating temperature range, and design flexibility needs.

Frequently Asked Questions (FAQ)

Q: Can the Molex 0877603017 be used as a direct replacement for the Amphenol ICC 86453-030LF?

A: Yes. Both connectors share identical pitch (0.079" / 2.00mm), position count (30), row configuration (2 rows), and mounting type (through-hole, right-angle). The primary difference is insulation material composition (PCT vs. polyamide), which does not affect functional interchangeability in standard applications. Operating temperature range is not specified for the Molex part.

Q: What is the difference between the two Samtec TMMH variants?

A: TMMH-115-01-F-D-RA and TMMH-115-01-T-D-RA differ in mating contact finish (gold vs. tin) and post length (0.103" vs. 0.092"). Both are cuttable headers with identical pitch and position specifications. The -T variant has lower inventory cost and higher stock availability.

Q: Are there compatibility concerns with the contact finish differences?

A: Contact finish differences (gold vs. tin mating surfaces) do not affect mechanical interchangeability. Selection should be based on application-specific requirements for contact resistance, corrosion resistance, and mating cycle durability.

Q: Does the cuttable header feature affect compatibility?

A: No. The cuttable feature in Samtec TMMH series provides design flexibility by allowing custom position counts. When used as a full 30-position header, the connector is fully compatible with the original specification.

Q: What is the impact of insulation material differences?

A: Insulation materials (polyamide, PCT, and LCP) have different thermal and mechanical properties. All materials specified meet UL94 V-0 flammability requirements where stated. Material selection should align with application temperature range and mechanical stress requirements.

Q: Are all substitute parts RoHS compliant?

A: Yes. All active substitute parts (Molex 0877603017, Samtec TMMH-115-01-F-D-RA, and Samtec TMMH-115-01-T-D-RA) are ROHS3 compliant. The original Amphenol ICC part compliance status is not specified.

Q: Which substitute offers the best availability?

A: Samtec TMMH-115-01-T-D-RA has the highest inventory availability at 5149 units, followed by TMMH-115-01-F-D-RA at 1203 units, and Molex 0877603017 at 700 units.