Würth Elektronik 860160572002 Aluminum Electrolytic Capacitor - Equivalent & Substitute Parts

Part Overview

The Würth Elektronik 860160572002 is a 15 µF, 35 V aluminum electrolytic capacitor in radial configuration with a 4000-hour lifetime rating at 105°C. This component is classified as Active product status and is designed for general-purpose applications requiring through-hole mounting. The part is ROHS3 compliant and REACH unaffected, making it suitable for modern electronic assemblies.

Substitute parts are identified when equivalent electrical and mechanical parameters allow direct replacement while maintaining circuit performance and physical compatibility.

Substiute Parts

860160572002

Würth ElektronikIn Stock: 1641860160572002 Datasheet

Current PartRFQ

860160672010

Würth ElektronikIn Stock: 2899860160672010 Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

The Würth Elektronik 860160672010 qualifies as a substitute for the 860160572002 based on the following criteria:

Matching parameters across both parts:

• Capacitance: 15 µF (identical)
• Tolerance: ±20% (identical)
• Lifetime @ Temperature: 4000 Hrs @ 105°C (identical)
• Operating Temperature Range: -55°C ~ 105°C (identical)
• Polarization: Polar (identical)
• Lead Spacing: 0.079" (2.00 mm) (identical)
• Package Type: Radial, Can (identical)
• Mounting Type: Through Hole (identical)
• RoHS Status: ROHS3 Compliant (identical)
• Series: WCAP-ATLL (identical)
• Product Status: Active (identical)

The substitute part features an upgraded voltage rating of 50 V compared to the original 35 V rating, with improved electrical performance characteristics including lower impedance and higher ripple current capacity.

Parameter Comparison

Engineering Selection Recommendations

Both the 860160572002 and 860160672010 maintain Active product status with ROHS3 compliance and REACH unaffected designation. The substitute part 860160672010 provides identical mechanical and thermal characteristics while offering enhanced electrical performance through higher voltage rating and reduced impedance. Selection between these parts depends on circuit voltage requirements and performance specifications.

Frequently Asked Questions (FAQ)

Q: Can the 860160672010 directly replace the 860160572002 in existing designs?

A: Direct replacement is supported from a mechanical and thermal standpoint. Both parts share identical lead spacing (0.079"), package dimensions (0.197" diameter, 0.492" height), and mounting configuration. Electrical compatibility depends on circuit voltage requirements. The substitute part's 50 V rating accommodates applications originally designed for 35 V operation.

Q: What are the key differences between these two parts?

A: The primary difference is the voltage rating: 860160572002 is rated at 35 V, while 860160672010 is rated at 50 V. The substitute part also exhibits lower impedance (1.87 Ohms vs. 2.29 Ohms) and higher ripple current capacity at both 120 Hz and 100 kHz frequencies.

Q: Are both parts suitable for the same PCB footprint?

A: Yes. Both parts are radial, through-hole components with identical lead spacing of 0.079" (2.00 mm) and matching physical dimensions. PCB layout modifications are not required for substitution.

Q: Do both parts meet the same compliance standards?

A: Yes. Both the 860160572002 and 860160672010 are ROHS3 compliant and REACH unaffected, meeting current regulatory requirements for electronic component manufacturing and use.

Q: What is the operating temperature range for both parts?

A: Both parts operate across the identical temperature range of -55°C to 105°C with a rated lifetime of 4000 hours at 105°C.