Würth Elektronik 860080572001 Equivalent & Substitute Parts

Part Overview

The Würth Elektronik 860080572001 is a 33 µF, 35 V aluminum electrolytic capacitor in radial configuration with a rated lifetime of 2000 hours at 105°C. This component is classified as Active and is suitable for general-purpose applications requiring through-hole mounting. The part is ROHS3 compliant and REACH unaffected, meeting current regulatory standards for electronic component manufacturing and distribution.

Substitute parts are identified when equivalent electrical characteristics and mechanical compatibility are maintained within the specified parameter tolerances for this product category.

Substiute Parts

860080572001

Würth ElektronikIn Stock: 2597860080572001 Datasheet

Current PartRFQ

860160572005

Würth ElektronikIn Stock: 3118860160572005 Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 860080572001 is determined by strict equivalence across the following critical parameters:

• Capacitance value: 33 µF (exact match required)
• Rated voltage: 35 V (exact match required)
• Tolerance: ±20% (exact match required)
• Polarization: Polar (exact match required)
• Mounting type: Through Hole (exact match required)
• Package configuration: Radial, Can (exact match required)
• Physical dimensions: Lead spacing 2.00 mm, diameter 5.00 mm, height 12.50 mm (exact match required)
• Operating temperature range: -55°C to 105°C (exact match required)
• RoHS and REACH compliance status (exact match required)

The substitute part 860160572005 meets all these criteria. Additional performance characteristics such as lifetime rating, ripple current specifications, and impedance values may differ between the main part and substitute, but do not affect substitution eligibility when the core electrical and mechanical parameters are equivalent.

Parameter Comparison

Engineering Selection Recommendations

Both the 860080572001 and 860160572005 are Active products from Würth Elektronik with identical ROHS3 and REACH compliance certifications. Selection between these parts should be based on application-specific requirements and inventory availability.

The 860160572005 offers an extended lifetime rating of 3000 hours at 105°C compared to the 2000-hour rating of the 860080572001, providing increased operational durability in temperature-stressed environments. Both parts maintain equivalent electrical performance across the specified capacitance, voltage, and tolerance parameters required for general-purpose applications.

Physical footprint and mounting characteristics are identical, ensuring direct mechanical compatibility in existing circuit board designs without layout modifications.

Frequently Asked Questions (FAQ)

Q: Can the 860160572005 be used as a direct replacement for the 860080572001?

A: Yes. Both parts share identical capacitance (33 µF), rated voltage (35 V), tolerance (±20%), polarization (Polar), mounting type (Through Hole), and physical dimensions (lead spacing 2.00 mm, diameter 5.00 mm, height 12.50 mm). No circuit board modifications are required.

Q: What is the difference between these two parts?

A: The primary differences are the series designation (WCAP-ATLI versus WCAP-ATLL) and the rated lifetime at 105°C (2000 hours versus 3000 hours). The 860160572005 provides extended operational life. Ripple current specifications at 100 kHz are similar (230 mA versus 222 mA).

Q: Are both parts RoHS and REACH compliant?

A: Yes. Both the 860080572001 and 860160572005 are ROHS3 compliant and REACH unaffected, meeting current regulatory requirements for electronic component use in regulated markets.

Q: Do these parts have the same operating temperature range?

A: Yes. Both parts operate across the identical temperature range of -55°C to 105°C, ensuring compatibility in applications with equivalent thermal requirements.

Q: Can I use the 860160572005 in a design originally specified for the 860080572001?

A: Yes. The electrical and mechanical parameters are equivalent. The substitute part is suitable for direct board-level replacement without design changes.