860010672002 Equivalent & Substitute Parts

Part Overview

The Würth Elektronik 860010672002 is a 0.22 µF, 50 V aluminum electrolytic capacitor in radial configuration with a rated lifetime of 2000 hours at 85°C. This component is classified as obsolete, necessitating identification of functionally equivalent alternatives for ongoing design support and procurement continuity. Substitute parts must maintain electrical performance and mechanical compatibility within the specified parameter tolerances.

Substiute Parts

860010672002

Würth ElektronikIn Stock: 1206860010672002 Datasheet

Current PartRFQ

UKL1HR22MDD1TD

NichiconIn Stock: 2424UKL1HR22MDD1TD Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 860010672002 is determined by strict equivalence across the following critical parameters:

• Capacitance value: 0.22 µF (exact match required)
• Voltage rating: 50 V (minimum acceptable)
• Tolerance: ±20% (electrical performance window)
• Lifetime specification: 2000 Hrs @ 85°C (reliability requirement)
• Operating temperature range: -40°C ~ 85°C (environmental compatibility)
• Polarization: Polar (circuit function requirement)
• Mounting type: Through Hole (PCB assembly compatibility)
• Package type: Radial, Can (form factor compatibility)
• Physical dimensions: 0.197" Dia (5.00mm) and 0.492" (12.50mm) height (board layout fit)
• RoHS3 compliance (regulatory requirement)

The Nichicon UKL1HR22MDD1TD meets all substitution criteria and is classified as a direct equivalent.

Parameter Comparison

Engineering Selection Recommendations

The Nichicon UKL1HR22MDD1TD is a direct functional equivalent to the obsolete Würth Elektronik 860010672002. Both components satisfy identical electrical specifications, mechanical dimensions, and regulatory compliance requirements. Selection between these parts is based on procurement availability and lead time considerations. The Nichicon part is currently available with 2391 units in stock, compared to 1178 units for the Würth Elektronik part. Both components maintain ROHS3 compliance and REACH unaffected status, ensuring regulatory compatibility in end-use applications.

Frequently Asked Questions (FAQ)

Q: Can the Nichicon UKL1HR22MDD1TD be used as a direct replacement for the Würth Elektronik 860010672002?

A: Yes. Both components share identical capacitance (0.22 µF), voltage rating (50 V), tolerance (±20%), lifetime specification (2000 Hrs @ 85°C), operating temperature range (-40°C ~ 85°C), and physical dimensions (0.197" Dia × 0.492" height). Through-hole radial mounting and RoHS3 compliance are equivalent across both parts.

Q: Are there differences in ripple current specifications between these parts?

A: Ripple current values differ between manufacturers. The Würth Elektronik part specifies 3.3 mA @ 120 Hz and 5.61 mA @ 100 kHz. The Nichicon part specifies 2.3 mA @ 120 Hz and 4.6 mA @ 10 kHz. These differences do not affect substitution eligibility, as both parts meet the 2000-hour lifetime requirement at 85°C under their respective operating conditions.

Q: What is the difference in lead spacing between these parts?

A: The Würth Elektronik part has 0.079" (2.00mm) lead spacing, while the Nichicon part has 0.098" (2.50mm) lead spacing. Both lead spacings are compatible with standard through-hole PCB layouts for radial capacitors. Verify PCB pad spacing during design review to confirm compatibility with your specific board layout.

Q: Do both parts have the same packaging format?

A: The Würth Elektronik part is supplied in Tape & Box (TB) packaging, while the Nichicon part is supplied in Cut Tape (CT) packaging. Both formats are standard for through-hole component distribution and do not affect electrical or mechanical performance.

Q: Are regulatory certifications equivalent?

A: Yes. Both parts are ROHS3 compliant, REACH unaffected, and classified under ECCN EAR99 with HTSUS code 8532.22.0020. Regulatory status is identical for both components.